Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Lots of warnings and errors in the event viewer.

14 Dec 2011   #11
0621sammy

Windows 7 Home Premium 64-bit
 
 

You can turn off the Nvidia driver service at bootup as it's not needed unless you're using special controls therein to overclock your video. Enter msconfig as shown in the troubleshooting steps to turn it off in msconfig>startup and >Services following the exact steps given to achieve a clean boot.

That wont effect the GPU at all will it? And no I'm not overclocking.

But I just ran SFC /SCANNOW and it told me it found a corrupt file but it was unable to fix it or something. But here's the file log from it if it means anything. But it did say in the log "Verify and Repair Transaction completed. All files and registry keys listed in this transaction have been successfully repaired"


My System SpecsSystem Spec
.
14 Dec 2011   #12
gregrocker

 

Nvidia services are bloatware whose loss won't affect anything unless you need special settings only they have. You only need the Display driver.

Run SFC again to see if it finds anything else.
My System SpecsSystem Spec
14 Dec 2011   #13
0621sammy

Windows 7 Home Premium 64-bit
 
 

Do you know if any of these are problems:

"Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x4025C23C33AD. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server." (Error)

"The speed of processor 4 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 3667 seconds since the last report." (Warning, only happens when booting up or down.)

"Name resolution for the name <Domain.com> timed out after none of the configured DNS servers responded." (Warning, Happens often)


I just Ran SFC again and got

"Beginning system scan. This process will take some time.

Beginning verification phase of system scan.

Verification 100% complete.
Windows Resource Protection found corrupt files but was unable to fix some of th
em.
Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For example
C:\Windows\Logs\CBS\CBS.log
"

Not sure if the log is any diffrent from the last one but here it is anyways.
My System SpecsSystem Spec
.

14 Dec 2011   #14
0621sammy

Windows 7 Home Premium 64-bit
 
 

If you need any other info I'll post it ASAP just tell me. But now I'm going to go to bed but I'll check here tomorrow to see what you found out. Thanks for your help so far!
My System SpecsSystem Spec
14 Dec 2011   #15
gregrocker

 

Hi Sammy -

Those errors are very common and harmless as I recall. You can still google their text and identifiers to understand them better and possibly learn what others have done to resolve them.

SFC is more of a concern. I'd run it a few more times to see if it can fix the broken file. PINTLGB.IMD can be damaged by uninstalling bloatware such as Office trial - have you done that?

The next elevation for irreparable System files is a Repair Install however I would probably go by performance when deciding how much of a priority that is.
My System SpecsSystem Spec
14 Dec 2011   #16
Wishmaster

Windows 7 Home Premium 64bit
 
 

The leaked registry handles is somewhat common, and if no mistaken, nothing to be alarmed about.

it just means a app opened a registry hive, but didnt close it when you shutdown.

As GregRocker already mentioned, the sfc scan is the most important thing.
My System SpecsSystem Spec
14 Dec 2011   #17
Teerex

Windows 7 x64 Ultimate SP1
 
 

Quote   Quote: Originally Posted by 0621sammy View Post
I am having quite a few errors and warnings in event viewer. I don't really know enough to tell weather they're insignificant or not. This laptop is an ASUS G74SX-BBK8 and it is brand new.

Here are my computer specs via Speccy:
http://speccy.piriform.com/results/uIWqmVEJuKPxAQAVrLfmeT3

I'm not really sure if that's all the info I needed to post or not if I need to post something else just tell me and I'll do it.

Some of the warnings are:
"Name resolution for the name <domainname.com> timed out after none of the configured DNS servers responded."

"Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.

DETAIL -
1 user registry handles leaked from \Registry\User\S-1-5-21-4104312563-485125815-1487247760-1000_Classes:
Process 1844 (\Device\HarddiskVolume2\Program Files\Trend Micro\AMSP\coreServiceShell.exe) has opened key \REGISTRY\USER\S-1-5-21-4104312563-485125815-1487247760-1000_CLASSES"

"Possible Memory Leak. Application (C:\Windows\system32\svchost.exe -k LocalServiceNetworkRestricted) (PID: 1240) has passed a non-NULL pointer to RPC for an [out] parameter marked [allocate(all_nodes)]. [allocate(all_nodes)] parameters are always reallocated; if the original pointer contained the address of valid memory, that memory will be leaked. The call originated on the interface with UUID ({3f31c91e-2545-4b7b-9311-9529e8bffef6}), Method number (20). User Action: Contact your application vendor for an updated version of the application."

And theres alot more

Some of the errors are:

"Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x4025C23C33AD. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server." (I get that one alot)

"ACPI: ACPI BIOS is attempting to write to an illegal PCI Operation Region (0x4), Please contact your system vendor for technical assistance." (I've had that one about 6 times so far)

And theres quite a few more than just those.


Thank you for your help in advance =).
As a fellow ASUS owner I'd like to soothe your nerves - every eevent is quite normal except the ACPI BIOS one.

The DNS is normal: this is just a report that an address was unreachable. If the domain name doesn't look familiar, not something you visited in your browser there's still nothing to worry about: most modern browsers will resolve almost every link they find on a webpage.

The second one is a Trend Micro coding sloppyness - they should release the handle on reboot/shutdown. Update Trend Micro, if it is not updated, or change your security vendor. There's nothing else you can do.

The DHCP event - your Bluetooth adapter. It sounds silly but it tries to find a network to connect to on startup. I have it disabled when I don't use it.
It could also be your virtual access point created by Intel's Wireless suite.

Memory leak - some application is causing it - try searching for that UUID in the registry and find the application it refers to.

Finally - ACPI: BIOS. Try updating your BIOS to the latest version available on ASUS, 203.
My System SpecsSystem Spec
14 Dec 2011   #18
gregrocker

 

Run a full scan with Malwarebytes.

You might want to replace your AV with the one most recommended here which is Microsoft Security Essentials with the Win7 firewall kept updated via Windows Update. Then run a full scan with it.
My System SpecsSystem Spec
14 Dec 2011   #19
0621sammy

Windows 7 Home Premium 64-bit
 
 

PINTLGB.IMD can be damaged by uninstalling bloatware such as Office trial - have you done that?

I have only uninstalled the Best Buy PC app, Trend Micro and the Bing Bar.

I ran SFC again twice with the same error saying it was unable to fix it. Once in Safe Mode and once just normally.

I'm running MBAM right now I'll tell you the results as soon as it finishes. But im 95% sure I don't have any viruses/trojans

Teerex, I'm not quite sure on how to update my BIOS because I have never done that before. And it just seems a little bit risky from what I've heard when googling how to do it.

Also I don't know if this has anything to do with any of this but some items had the like the weird icon when you can't open the file or whatever. But a reboot turned them back to normal it's harder to explain so I just took a screenie.

My System SpecsSystem Spec
14 Dec 2011   #20
0621sammy

Windows 7 Home Premium 64-bit
 
 

Nothing was found on the scan.

Malwarebytes' Anti-Malware 1.51.2.1300
Malwarebytes : Free anti-malware, anti-virus and spyware removal download

Database version: 8371

Windows 6.1.7601 Service Pack 1
Internet Explorer 9.0.8112.16421

12/14/2011 3:38:42 PM
mbam-log-2011-12-14 (15-38-42).txt

Scan type: Full scan (C:\|D:\|E:\|)
Objects scanned: 324328
Time elapsed: 20 minute(s), 40 second(s)

Memory Processes Infected: 0
Memory Modules Infected: 0
Registry Keys Infected: 0
Registry Values Infected: 0
Registry Data Items Infected: 0
Folders Infected: 0
Files Infected: 0

Memory Processes Infected:
(No malicious items detected)

Memory Modules Infected:
(No malicious items detected)

Registry Keys Infected:
(No malicious items detected)

Registry Values Infected:
(No malicious items detected)

Registry Data Items Infected:
(No malicious items detected)

Folders Infected:
(No malicious items detected)

Files Infected:
(No malicious items detected)
My System SpecsSystem Spec
Reply

 Lots of warnings and errors in the event viewer.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows 7 Constantly Freezing - Lots of Errors in Event Viewer
My Acer Aspire 5253 running on Windows Home 64bit keeps freezing up every 10 seconds. It's been happening for three days. I found a lot of errors in the Event Viewer but I'm not sure what to do with them. They are listed below with a row of pound signs between errors in chronological order, with...
Performance & Maintenance
Event Viewer Errors & Warnings
I'd hoped to resolve these myself but right off the bat I don't understand what to do or where to go. :o This VSS one tells me to "check security on the volume" but I don't even know where to go to do that. My Event Viewer is loaded with errors & warnings. Many people have said to ignore...
Performance & Maintenance
Multiple errors & warnings in Event Viewer, what do you guys think?
Ever since I got my replacement drive I've been getting frequent errors and warnings that have to do with indexing, searching, application errors, and SideBySide here's a few examples: SideBySide: Application Errors: ^^^Not sure if the Intel Rapid Storage Technology is causing all of this...
General Discussion
lots of errors in event viewer
Hello i am new to the fourms but am a bit shook up over somthing..i have recently been told that my computer has junk files that are now dangerous and harming my hardware..im unsure if this is true.but i did follow instructions and was told to go to event viewer and look at the system,aplications...
System Security
Problems with random 'Server Not Found' errors & event viewer warnings
So while I'm browsing the internet, every so often I get a random Server Not Found message. It happens less than a second after I click the link so it's like an instant timeout. And once in a while, warnings show up in my event viewer like this: ...
Network & Sharing
Event Viewer warnings
Using Event Viewer/Applications I was getting 5 error events each day. This had to do with a "search" for a file on an external HD. I have just formated the HD and now I get "Warnings" about the the same files. The HD is now blank. How do I get rid of the warnings? Thanks for any help.
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:30.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App