Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Can you give me some information about shut down

29 Dec 2011   #11
Epokhe

Windows 7 Pro x64
 
 

Hehe, my brilliant computer...
Now it THINKS it's shutting down in 13 seconds... I will explain...

I looked at the summary graph of the Disk I/O, and found wininit>hiberfil.sys was using the disk. It is the file of hibernate mode, and so I disabled it by typing "powercfg -h off" in elevated command prompt. Now this file doesn't exist I know because I don't see it anymore in C(system folder) while I can see pagefile.sys(both are system files). After I made it, I turned off the computer, and it shutted down in 1 minutes 40 seconds. There was an improvement about 1 minute. And after, I did the trace again. In the previous one, if you remember, it showed me the shutdown as if it lasted 86 seconds. Now, it shows 13-14 seconds. But pc shutted down in 1.40?! Yes, there is a 60 sec. improvement, from 86 to 13(which are shown in the trace analyzer program), and from 2.40 to 1.40(which are the real numbers). But why, THE MONITOR SHOWS THE SCREEN THAT SAYS "SHUTTING DOWN" for 1 minute 40 seconds, but my genius laptop says that it shuts down in 13 seconds.

And I'm not schizophrene, or I didn't count the time by myself, my chronometer did. Doctor, tell me, why does my computer think that it shuts down in 13 secs. Does it need a reinstall?

Changes in the new trace
1. Wsearch doesn't last that much long.
2. Disk I/O writes are not that much.
3. "Looks" NORMAL.


My System SpecsSystem Spec
.
29 Dec 2011   #12
cluberti

Windows 10 Pro x64
 
 

If you can 7zip and upload it, I can look later.
My System SpecsSystem Spec
29 Dec 2011   #13
Epokhe

Windows 7 Pro x64
 
 

This file is smaller than the first.
https://***************/files/3470144...REGISTRY_1.rar
My System SpecsSystem Spec
.

29 Dec 2011   #14
torre

Win 7, 32bit, Premium
 
 

What are your system specs and antivirus ? Have you checked the Windows Event Log (Control Panel) ?

The above recommendations are excellent but a simple System Restore or Win 7 reinstall may solve the problem.

I had the same issue when running Vista and elected to perform a clean reinstall to eliminate any possibility of virus/malware.
My System SpecsSystem Spec
29 Dec 2011   #15
Epokhe

Windows 7 Pro x64
 
 

You can see my system specs in my profile. I use Kaspersky Internet Security 2012, and also use secunia psi to automatically update the old programs. I've just checked the event viewer. After the time that I disabled the hibernate mode is shown 3-4 warnings.
If I write all of them, nvlddmkm driver stopped to response and successfully recovered, a dns time out warning for "www.msftncsi.com " and "6to4.ipv6.microsoft.com", "psi.secunia.com", "cheap-pills.bestforum.ca ", "wac.2010.edgecastcdn.net " \Driver\WUDFRd driver failed to load, and wireless configuration service is stopped successfully. They are not exactly the same, rough translation only. Wireless warning is normal, it stops because I don't use it and closed. I know psi and microsoft sites are safe. I didn't enter any of the other sites(seriously, cheap pills ), maybe it can be some connections from other sites or easier to say, it can be a sign of virus.

Of course, I tried the system restore, but it gave an error after restart. If I remember right, it said that system restore couldn't change something. I didn't try it again, maybe tomorrow I can do.

I can do a reinstall also, not too soon, but I can. However, handling with this problem taught me some important things and actually it is fun . Shortly, when I reach the point that I can't go on like this, I will reinstall the windows.
My System SpecsSystem Spec
29 Dec 2011   #16
torre

Win 7, 32bit, Premium
 
 

Yeah, I have never been successful with System Restore.

I admire your patience.
My System SpecsSystem Spec
29 Dec 2011   #17
cluberti

Windows 10 Pro x64
 
 

Well, the kernel issued it's final stop command at approximately 13 seconds. In looking at the CPU scheduling, however, the system thread 3304 (a worker thread for disk I/O, it seems) is pre-empted by an unknown thread with an unknown process ID (shows as -1), and there's a marker for WinSAT WinSPR info. I honestly have no idea what's happening here (because the kernel is shutting down when this occcurs, so info that I would normally expect to see is gone), but I do see disk I/O calls through to ntfs.sys and a disk I/O request to the Intel storage driver at the time, which appears to go on without finishing at the end of the time traced. I need to do some research here, but I feel like there's something here. It doesn't appear to be antivirus (or any other application, as none are loaded at this point in the trace at all), but it could be the Intel driver. I'll do some research, but it might be interesting to run (from an elevated cmd prompt) winsat formal to run a new winsat to update your scores, reboot, and then look into testing different versions of the Intel driver for your storage controller from the Intel site to see if there's any change in behavior.
My System SpecsSystem Spec
30 Dec 2011   #18
Epokhe

Windows 7 Pro x64
 
 

http://img715.imageshack.us/img715/2834/27921615.png
http://img85.imageshack.us/img85/2778/30292326.png
I ran winsat formal from elevated cmd, and above is my results.


http://img7.imageshack.us/img7/4711/22521380.png
And some texts are Turkish, so it's a picture of another person in internet, you can see their english translations in it.


http://img692.imageshack.us/img692/5169/77428946n.png
And do I need to uninstall this driver to try different versions, is it the driver that you mention? I tried to update it, windows said that it is the latest one.
My System SpecsSystem Spec
30 Dec 2011   #19
cluberti

Windows 10 Pro x64
 
 

Depends on the intel storage controller on your motherboard - which board are you using, and which version of the Intel controller is that in your screenshot? Your mobo is not in your specs.
My System SpecsSystem Spec
30 Dec 2011   #20
Epokhe

Windows 7 Pro x64
 
 

It is clevo P150HM I think, it is not a very known one. And version of the driver is 10.5.0.1026. Yes I didn't put it because it is not known.
My System SpecsSystem Spec
Reply

 Can you give me some information about shut down




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD - Occurs during Shut Down Process. Shut Down hangs then crashes
Hey there, Lenovo E440 that ran excellent until recently. About a week or two ago I got an error message about a power surge on a USB port. Didn't really seem to effect much so I moved on. Lately, when shutting down, it hangs for a few minutes... just sitting at the final "Shutting Down"...
BSOD Help and Support
Windows unable to shut down ("Waiting For Shut Down" "This Program is
Google knows nothing of this problem. every time I try to shut down my inspiron 1525, it cannot shut down! it says ""Waiting For Shut Down." "This Program is preventing Windows from shutting down"" force shutdown doesn't do anything. I have to hold the power button to hard shut down
General Discussion
Shut Down - Enable or Disable Shut Down without Logging On
How to Enable or Disable Shut Down without Having to Log On This will show you how to enable or disable all users to be able to shut down the computer without having to log on in Windows 7. This will add or remove the red shut down menu box in all Log on and Switch user screens. You will...
Tutorials
Shut Down Windows - Change "Install Updates and Shut Down" as Default
How to Change "Install Updates and Shut Down" as Default Choice in Shut Down Windows Dialog This will show you how to manage whether the Install Updates and Shut Down option is allowed to be the default choice in the ALT+F4 Shut Down Windows dialog and Start Menu "Shut Down" power button...
Tutorials
Shut Down Windows - Enable or Disable "Install Updates and Shut Down"
How to Enable or Disable "Install Updates and Shut Down" Option in Windows 7 This will show you how to enable or disable the Install Updates and Shut Down shield on the Start Menu "Shut Down" power button and option in the ALT+F4 Shut Down Windows dialog box for users in Windows 7 when...
Tutorials
Screen shut-off requires hard shut down
I work on my Gateway while sitting on the couch. I surf the Internet and then watch TV. I surf a little more, and then I watch more TV. Some nights, when I slide the computer near me because I've shifted in my seat, the screen will go black and I have to push the On/Off switch until the computer...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:54.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App