Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: The description for Event ID 9 from source KScsiPrt cannot be found...

30 Dec 2011   #1
writhziden

Windows 7 Home Premium 64 Bit
 
 
The description for Event ID 9 from source KScsiPrt cannot be found...

Had my system freeze up due to the following system error that is becoming more and more frequent:

Code:
The description for Event ID 9 from source KScsiPrt cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

If the event originated on another computer, the display information had to be saved with the event.

The following information was included with the event: 

\Device\Scsi\KScsiPrt1
Any ideas on how to fix this? Perhaps sfc /scannow?


My System SpecsSystem Spec
.
30 Dec 2011   #2
writhziden

Windows 7 Home Premium 64 Bit
 
 

sfc /scannow found no integrity violations... I am at a loss as to how to fix this issue at this point. Further suggestions are very welcome.
My System SpecsSystem Spec
31 Dec 2011   #3
cluberti

Windows 10 Pro x64
 
 

The event ID message is telling you that either the SCSI controller, or a device attached to the controller, did not respond to an I/O request. Either a device is going bad, or the controller is.
My System SpecsSystem Spec
.

01 Jan 2012   #4
writhziden

Windows 7 Home Premium 64 Bit
 
 

Quote   Quote: Originally Posted by cluberti View Post
The event ID message is telling you that either the SCSI controller, or a device attached to the controller, did not respond to an I/O request. Either a device is going bad, or the controller is.
I think my driver for KernSafe SCSI Controller may be corrupt or need updating. I will look into it...
My System SpecsSystem Spec
01 Jan 2012   #5
writhziden

Windows 7 Home Premium 64 Bit
 
 

That driver was part of my DVD virtualization software. Have to re-install that software now.

Uninstalled and re-installed the virtual drive. I'll see if that solves the system errors.
My System SpecsSystem Spec
01 Jan 2012   #6
writhziden

Windows 7 Home Premium 64 Bit
 
 

Ok, uninstalling and re-installing did not resolve the issue, so I decided to disable the driver through device manager. I can always enable it again when I want to use the virtualization software. See if this resolves my issue.
My System SpecsSystem Spec
01 Jan 2012   #7
writhziden

Windows 7 Home Premium 64 Bit
 
 

Problem was solved by disabling the KernSafe SCSI Controller driver in device manager.
My System SpecsSystem Spec
Reply

 The description for Event ID 9 from source KScsiPrt cannot be found...




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Event Viewer Event Id 2002, Source: EapHost, Log Application
Well, I tryed to manage page-file but unfortunataly it resulted in problems. Then I lost VAIO-CARE and 7 ZIP files too. When I open Event Viewer every single day I see this: event Id 2002, Souce: Eap Host, Log name: Application and number of Eventes: 84. As I am desparate about that, What sould...
General Discussion
Event Viewer Warning - Source e1yexpress - Event ID 27
A week ago I started getting this warning errors logged three to six times or more per day in Event Viewer. Event Viewer Warning - Source is e1yexpress - Event ID is 27 Intel(R) 82567V-2 Gigabit Network Connection Link has been disconnected. Every time Event Viewer logs the e1yexpress...
General Discussion
PC crash description. With event viewer logs, please help
My computer crashes while watching video or playing games (even css) at least twice a day. It just goes to black or fuzzed screen, light dies from keyboard and makes real hard to describe sound. (not like a loop, I don't think anyway) I have a feeling its my graphics card as its old as compared to...
General Discussion
BSOD, event id 508, source: ESENT
Note: I have not been able to include a performance report as I got the following error after following instructions: Error: An error occured while attempting to generate the report. The wait for the report generation tool to finish has timed out.
BSOD Help and Support
Event 4321 Source NetBF
The two computers are windows 7. One is Pro 64 bit the other Home Premium 32 bit. I'm getting this in the event viewer of the 32 bit Home premium. The name " WORKGROUP " :1d" could not be registered on the interface with IP address 192.168.1.25. The computer with the IP address 192.168.1.20 ...
Network & Sharing
Unusual event source
Has this error been dogging your system, too? g
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:18.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App