Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Virtual Memory Issue

18 Jan 2009   #31
falfaro

Windows 7
 
 
Watermark

Quote   Quote: Originally Posted by Devil Jin View Post
Hmm I did use orbit to remove waterwark and sendfeed back but I used it before also and didn`t face any problem photoshop was running before
What's wrong with the watermark and why is people like crazy trying to remove it?


My System SpecsSystem Spec
.

29 Jan 2009   #32
solmayor

windows 7
 
 

My just hanging, trying to change the virtual memory to different hard drive


Attached Thumbnails
-virtual_m.png  
My System SpecsSystem Spec
29 Jan 2009   #33
Mark

Windows 7 Ultimate Vista Ultimate x64
 
 

By the looks of it you have already set up your page file on your primary, so does that mean that you have not had this problem when you first installed Windows?
My System SpecsSystem Spec
.


30 Jan 2009   #34
solmayor

windows 7
 
 
virtual memory

Thanks for the reply.

No, it was ok, what I try is to use a separate drive for my virtual memory
My System SpecsSystem Spec
07 Feb 2009   #35
curmet

Windows 7
 
 

Hi,

I had/have the same problem where i try to set a custom paging file size and it ends up Not-responding.

So I started up in Safe-mode and i set the paging file without failure and it responded like normal and didn't freeze at all but when I started windows in normal mode and i went back into Vitual Memory area to see if it had set it, it had gone back done to 2000mb but when i open it it still has all the right sizes i set in safe-mode.
Also if i go to "dxdiag" it says that my paging file is 4062mb which is still 3gb shy of the right amount i had set it to in Safe-mode.

But yea... is it still set to tthe size i specified or did it revert back to 2000mb?

Thanks
My System SpecsSystem Spec
07 Feb 2009   #36
curmet

Windows 7
 
 

Hi again,

I think I figured it out.

Start up in Safe-mode then disable the paging file for the MAIN Partition and then just set enough pagefile size with the rest of your partitions.

The reason for that is, it seems that if the main Partition(one with windows on it) has a paging file on it, then it causes that "Virtual Memory" window to stop responding.

Cause now, after i disabled it only on the main partition, i'm able to change the file size and apply it without it freezing.

So try it and let me know if it works or not, unless you'll already fixed it.


P.S. for some reason it doesn't read the entire amound of Pagefile size correctly, it does still come close to it, well actually it ended up being a bit more than what i told it to be, about 100mb more.

/Curmet
My System SpecsSystem Spec
Reply

 Virtual Memory Issue




Thread Tools





Similar help and support threads
Thread Forum
Virtual Memory
solved solved solved solved solved solved solved solved solved solved solved solved solved solved solved solved solved solved solved solved solved solved solved solved solved solved solved solved
Performance & Maintenance
virtual memory
My windows 7 machine has 16 Gb of RAM memory, an SSD (vertex 111Gb) disk and 2 WD (1Tb) harddisks. To save space on my SSD, I was advised to remove my virtual memory, which I did several months ago. Everything worked fine after that, even Photoshop. This week I started working with MAGIX which...
Performance & Maintenance
Windows 7 Ultimate x64 Virtual memory issue
So i have finally decided i should seek help for this after looking at a decent 100+ fixes/similar problems related to my issue. For about 2 months now i have been getting virtual memory low errors and attempted to change these settings to no avail, my Virtual memory seems to be "locked" i'm...
Performance & Maintenance
MAX Virtual Memory?
What is the MAX Virtual Memory? Is the MAX Virtual Memory different for 32bit & 64bit OS's? I know that there is a MAX because I set mine to 10Gig & it was not accepted by 32bit Win7. MLStrand56
Performance & Maintenance
Virtual Memory
I'm using Windows 7Pro 64 bit with 8 Gig of ram. What would be a good setting for my virtual memory? Right now it's set 8191 MB.
Performance & Maintenance
Virtual Memory
Hey guys, ok so i have 3gb ram, 250gb hdd, intel core 2 duo p8400 @ 2.26ghz so i was wondering about my virtual memory how much do you suggest that i set it to? what different will it make? THANKS IN ADVANCE!
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:06.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App