Cannot rate Windows Experience Index

Ricorik · 24 Feb 2012

Not it is important but very strange.

I have try this command to see whats wrong: WINSAT CPU -COMPRESSION -V

WinSAT (Windows Experience Index) system rating will not run (Windows Vista / Microsoft Windows 7)..

If you see the following error:
"ERROR: cannot process assessment results
cannot load XML data from a string
An invalid character was found in text content.
From Interface msxml6.dll:IXMLDOMDocument2"
then you probably have an incorrect BIOS SMBIOS string on your mainboard.

I try for weeks now to find out what the problem is

Any suggestions?

Brink · 24 Feb 2012

Hello Ricorik,

You might see if you may be able to run WEI after resetting it using OPTION TWO in the tutorial below.

Windows Experience Index - Reset

Hope this helps,
Shawn

Ricorik · 24 Feb 2012

Could not find

Brink · 24 Feb 2012

Go ahead and try OPTION ONE and/or OPTION THREE in the same tutorial to see if you may be able to reset WEI with either one of them.

Ricorik · 24 Feb 2012

Option 1 that same error
Option 3 (i get a empty folder) nothing in there.

I have the option to see all files in maps.

Same: Windows Expierience Index could not be computed

I have found a bios update (BIOS Vendor: American Megatrends)

It seems many bugs are solved in this update. But it says Error: BIOS is write-protected

Brink · 24 Feb 2012

Ok, for right now, see if running a sfc /scannow command may be able to find and fix any bad system files that may be responsible.

For your Foxconn A88GMV motherboard, I found that the A34F1P03 (5/30/2011) is the latest BIOS version at the link below in the Tech Support tab under BIOS (2nd one listed).

Foxconn PRODUCT : Motherboard : Details

It looks like in the Fox Central Control Unit section of your BIOS, that you may have the Super BIOS Protect option enabled that is causing it to be write protected. See page 27 of your motherboard's manual for more on this. The manual will be at the same location at the link above under Manual for v1.2.

Ricorik · 24 Feb 2012

yes i have turn it off already (i try that update/flash A34F1P03

again.

But first sfc /scannow

Thx for the help :)

Ricorik · 24 Feb 2012

Done:

SFC found not problems

But still same error:

Winsat: Log (Is it correct to place it here?)

Code:

 
030201 (0844) - winsat\logging.cpp:0815: --- START 2009\7\13 22:08:30 PM ---
030232 (0844) - winsat\main.cpp:4301: Command Line = "D:\Windows\system32\winsat.exe" moobe -cancelevent 849bd0b4-8fa1-4e71-8c56-8fdbbf2e34d1 -moobegoevent 27423f94-1309-49e2-9e93-e31a7cd77d2f
030232 (0844) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
030357 (0844) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=TRUE.
030420 (0844) - winsat\main.cpp:4585: Watch dog system enabled
030420 (0844) - winsat\main.cpp:4592: Main watch dog timer set to 60.0 seconds
030638 (0844) - winsat\main.cpp:2505: > DWM not running.
031746 (0844) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
031761 (0844) - winsat\main.cpp:2793: > power policy saved.
031886 (0844) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
031902 (0844) - winsat\main.cpp:2814: > power policy set to maximum.
032307 (0844) - d3d\dx9misc.cpp:1030: HRESULT = 8876086a
032323 (0844) - d3d\dx9misc.cpp:1030: Error: Unable to create the D3D device
032323 (0844) - d3d\dx9misc.cpp:1030: Error: Unable to check the capabilities of the video card because a d3d device could not be created
032463 (0844) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
032463 (0844) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=TRUE RanOverTs=FALSE RanOnbatteries=FALSE
032479 (0844) - winsat\main.cpp:1775: > Run Assessment features 
033009 (0844) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
033150 (0844) - d3d\graphicsop.cpp:0263: Driver is not WDDM; aborting assessment.
033446 (0844) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
033462 (0844) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
033524 (0844) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
033540 (0844) - winsat\processresults.cpp:1274: Limiting DWM Score to 1.0 - no DX9 capability
033540 (0844) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
033571 (0844) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=TRUE RanOverTs=FALSE RanOnbatteries=FALSE
033680 (0844) - winsat\processresults.cpp:1274: Limiting DWM Score to 1.0 - no DX9 capability
033696 (0844) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
033696 (0844) - common\winsatutilities.cpp:1382: cannot access the winast API registry key; 2 The system cannot find the file specified.
033789 (0844) - winsat\main.cpp:2339: > Finalized MOOBE key
033836 (0844) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
033836 (0844) - winsat\main.cpp:2855: > Power state restored.
033852 (0844) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
033945 (0844) - winsat\main.cpp:2899: INFO: DwmpRestartComposition() did not return OK!
033961 (0844) - winsat\watchdog.cpp:0311: Watch dog system shutdown
033977 (0844) - winsat\main.cpp:4909: > exit value = 0.
 
025318 (0796) - winsat\logging.cpp:0815: --- START 2012\2\24 17:45:27 PM ---
025334 (0796) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" moobe -cancelevent deff7499-9ec6-4593-8979-7a57ef3f371c -moobegoevent 360818ca-0919-4530-b103-2cdcbe958003
025350 (0796) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
025506 (0796) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=TRUE.
025552 (0796) - winsat\main.cpp:4585: Watch dog system enabled
025552 (0796) - winsat\main.cpp:4592: Main watch dog timer set to 60.0 seconds
025740 (0796) - winsat\main.cpp:2505: > DWM not running.
027736 (0796) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
027736 (0796) - winsat\main.cpp:2793: > power policy saved.
027939 (0796) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
027955 (0796) - winsat\main.cpp:2814: > power policy set to maximum.
028236 (0796) - d3d\dx9misc.cpp:1030: HRESULT = 8876086a
028236 (0796) - d3d\dx9misc.cpp:1030: Error: Unable to create the D3D device
028251 (0796) - d3d\dx9misc.cpp:1030: Error: Unable to check the capabilities of the video card because a d3d device could not be created
028282 (0796) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
028282 (0796) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=TRUE RanOverTs=FALSE RanOnbatteries=FALSE
028282 (0796) - winsat\main.cpp:1775: > Run Assessment features 
028875 (0796) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
029031 (0796) - d3d\graphicsop.cpp:0263: Driver is not WDDM; aborting assessment.
029421 (0796) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
029421 (0796) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
029593 (0796) - winsat\main.cpp:2339: > Finalized MOOBE key
029608 (0796) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
029608 (0796) - winsat\main.cpp:2855: > Power state restored.
029624 (0796) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
029796 (0796) - winsat\main.cpp:2899: INFO: DwmpRestartComposition() did not return OK!
029796 (0796) - winsat\watchdog.cpp:0311: Watch dog system shutdown
029796 (0796) - winsat\main.cpp:4909: > exit value = 1.
 
530606 (1068) - winsat\logging.cpp:0815: --- START 2012\2\24 11:00:37 AM ---
530606 (1068) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent f1386d4e-9c19-4748-93ee-925e10387c5e
530637 (1068) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
531074 (1068) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.
531167 (1068) - winsat\main.cpp:4585: Watch dog system enabled
531167 (1068) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
531932 (1068) - winsat\main.cpp:2505: > DWM not running.
531947 (1068) - winsat\main.cpp:2470: > EMD service will be restored on exit.
532150 (1068) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
532150 (1068) - winsat\main.cpp:2793: > power policy saved.
532384 (1068) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
532384 (1068) - winsat\main.cpp:2814: > power policy set to maximum.
533507 (1068) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
533507 (1068) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
533507 (1068) - winsat\main.cpp:1775: > Run Assessment features 
533585 (1068) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
547485 (1068) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 11230200
547501 (1068) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
547501 (1068) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
553803 (1068) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
560511 (1068) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
567765 (1068) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
574614 (1068) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
582351 (1068) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
588716 (1068) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
595206 (1068) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
601711 (1068) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
610665 (1068) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
618949 (1068) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
625049 (1068) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
628434 (1068) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_MPEG2_HD_15mbps.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
636343 (1068) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_VC1_15mbps.wmv -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 135 -expfrmmax 150 -overrideframetype prog
642973 (1068) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_480i_5sec_6mbps_new.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
650305 (1068) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_480p_5sec_6mbps_new.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 135 -expfrmmax 150 -overrideframetype prog
656967 (1068) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_10mbps_h264.mp4 -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 135 -expfrmmax 150 -overrideframetype prog
663519 (1068) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_480_5sec_6mbps_h264.mp4 -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
669774 (1068) - winsat\main.cpp:1775: > Run Assessment media -input C:\Windows\Performance\WinSAT\winsatencode.wmv -encode C:\Windows\Performance\WinSAT\winsat.prx
674719 (1068) - winsat\main.cpp:1775: > Run Assessment moobego 
674719 (1068) - winsat\main.cpp:1775: > Run Assessment cpu -encryption -up
677917 (1068) - winsat\main.cpp:1775: > Run Assessment cpu -compression -up
687933 (1068) - winsat\main.cpp:1775: > Run Assessment cpu -encryption2 -up
691022 (1068) - winsat\main.cpp:1775: > Run Assessment cpu -compression2 -up
701162 (1068) - winsat\main.cpp:1775: > Run Assessment cpu -encryption
711348 (1068) - winsat\main.cpp:1775: > Run Assessment cpu -compression
721520 (1068) - winsat\main.cpp:1775: > Run Assessment cpu -encryption2
724687 (1068) - winsat\main.cpp:1775: > Run Assessment cpu -compression2
734889 (1068) - winsat\main.cpp:1775: > Run Assessment mem 
740068 (1068) - winsat\main.cpp:1775: > Run Assessment disk -seq -read -n 0
750910 (1068) - winsat\main.cpp:1775: > Run Assessment disk -ran -read -n 0
763141 (1068) - winsat\main.cpp:1775: > Run Assessment disk -scen 2009 -drive C:
831438 (1068) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
831438 (1068) - winsat\main.cpp:2855: > Power state restored.
831438 (1068) - winsat\main.cpp:2870: > Successfully reenabled EMD.
831625 (1068) - winsat\main.cpp:2896: > Composition restarted
831625 (1068) - winsat\watchdog.cpp:0311: Watch dog system shutdown
831641 (1068) - winsat\main.cpp:4909: > exit value = 1.
 
3374488 (2672) - winsat\logging.cpp:0815: --- START 2012\2\24 11:48:01 AM ---
3374488 (2672) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\WinSAT.exe" CPU -COMPRESSION -V
3374488 (2672) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
3374613 (2672) - winsat\main.cpp:2490: > DWM Running.
3374613 (2672) - winsat\main.cpp:2501: > leaving DWM on.
3374988 (2672) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
3374988 (2672) - winsat\main.cpp:2793: > power policy saved.
3375159 (2672) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
3375159 (2672) - winsat\main.cpp:2814: > power policy set to maximum.
3376002 (2672) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
3376002 (2672) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=FALSE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
3376002 (2672) - winsat\main.cpp:1775: > Run Assessment features 
3376080 (2672) - winsat\main.cpp:1775: > Run Assessment cpu -COMPRESSION
3386391 (2672) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
3386391 (2672) - winsat\main.cpp:2855: > Power state restored.
3386391 (2672) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
3386532 (2672) - winsat\main.cpp:4909: > exit value = 1.
 
3392335 (1760) - winsat\logging.cpp:0815: --- START 2012\2\24 11:48:19 AM ---
3392335 (1760) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\WinSAT.exe" CPU -COMPRESSION -V
3392335 (1760) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
3392444 (1760) - winsat\main.cpp:2490: > DWM Running.
3392444 (1760) - winsat\main.cpp:2501: > leaving DWM on.
3392818 (1760) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
3392818 (1760) - winsat\main.cpp:2793: > power policy saved.
3393021 (1760) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
3393021 (1760) - winsat\main.cpp:2814: > power policy set to maximum.
3393848 (1760) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
3393848 (1760) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=FALSE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
3393848 (1760) - winsat\main.cpp:1775: > Run Assessment features 
3393942 (1760) - winsat\main.cpp:1775: > Run Assessment cpu -COMPRESSION
3404175 (1760) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
3404175 (1760) - winsat\main.cpp:2855: > Power state restored.
3404175 (1760) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
3404300 (1760) - winsat\main.cpp:4909: > exit value = 1.
 
3445453 (4276) - winsat\logging.cpp:0815: --- START 2012\2\24 11:49:12 AM ---
3445547 (4276) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\WinSAT.exe" CPU -COMPRESSION -V
3445562 (4276) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
3446795 (4276) - winsat\main.cpp:2490: > DWM Running.
3446795 (4276) - winsat\main.cpp:2501: > leaving DWM on.
3447606 (4276) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
3447653 (4276) - winsat\main.cpp:2793: > power policy saved.
3449494 (4276) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
3449494 (4276) - winsat\main.cpp:2814: > power policy set to maximum.
3450336 (4276) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
3450336 (4276) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=FALSE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
3450336 (4276) - winsat\main.cpp:1775: > Run Assessment features 
3450445 (4276) - winsat\main.cpp:1775: > Run Assessment cpu -COMPRESSION
3479321 (4276) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
3479461 (4276) - winsat\main.cpp:2855: > Power state restored.
3479524 (4276) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
3480070 (4276) - winsat\main.cpp:4909: > exit value = 1.
 
3488353 (4832) - winsat\logging.cpp:0815: --- START 2012\2\24 11:49:55 AM ---
3488369 (4832) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\WinSAT.exe" CPU -COMPRESSION -V
3488369 (4832) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
3488712 (4832) - winsat\main.cpp:2490: > DWM Running.
3488728 (4832) - winsat\main.cpp:2501: > leaving DWM on.
3490241 (4832) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
3490257 (4832) - winsat\main.cpp:2793: > power policy saved.
3490927 (4832) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
3490927 (4832) - winsat\main.cpp:2814: > power policy set to maximum.
3491739 (4832) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
3491801 (4832) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=FALSE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
3491801 (4832) - winsat\main.cpp:1775: > Run Assessment features 
3491910 (4832) - winsat\main.cpp:1775: > Run Assessment cpu -COMPRESSION
3502160 (4832) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
3502160 (4832) - winsat\main.cpp:2855: > Power state restored.
3502160 (4832) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
3502893 (4832) - winsat\main.cpp:4909: > exit value = 1.
 
4787904 (3252) - winsat\logging.cpp:0815: --- START 2012\2\24 12:11:34 PM ---
4787904 (3252) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -restart clean -cancelevent 946835b6-9632-4271-b52a-2969406ef3fc
4787904 (3252) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
4788185 (3252) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.
4788216 (3252) - winsat\main.cpp:4585: Watch dog system enabled
4788216 (3252) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
4788762 (3252) - winsat\main.cpp:2490: > DWM Running.
4789090 (3252) - winsat\main.cpp:2497: > turning off DWM.
4789090 (3252) - winsat\main.cpp:2470: > EMD service will be restored on exit.
4790057 (3252) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
4790057 (3252) - winsat\main.cpp:2793: > power policy saved.
4790291 (3252) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
4790291 (3252) - winsat\main.cpp:2814: > power policy set to maximum.
4791414 (3252) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
4791414 (3252) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
4791414 (3252) - winsat\main.cpp:1775: > Run Assessment features 
4791492 (3252) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
4801258 (3252) - winsat\main.cpp:1948: > Cancel received, waiting 10000ms for dwm to cancel
4801258 (3252) - winsat\main.cpp:1958: > dwm assessment succesfully canceled.
4801320 (3252) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
4801320 (3252) - winsat\main.cpp:2855: > Power state restored.
4801320 (3252) - winsat\main.cpp:2870: > Successfully reenabled EMD.
4801492 (3252) - winsat\watchdog.cpp:0311: Watch dog system shutdown
4801492 (3252) - winsat\main.cpp:4909: > exit value = 3.
 
4816265 (4100) - winsat\logging.cpp:0815: --- START 2012\2\24 12:12:03 PM ---
4816265 (4100) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -restart clean -cancelevent 210738f9-b2ac-45b0-9adb-0132031fda9c
4816265 (4100) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
4816421 (4100) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.
4816452 (4100) - winsat\main.cpp:4585: Watch dog system enabled
4816452 (4100) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
4816562 (4100) - winsat\main.cpp:2490: > DWM Running.
4816764 (4100) - winsat\main.cpp:2497: > turning off DWM.
4816764 (4100) - winsat\main.cpp:2470: > EMD service will be restored on exit.
4817154 (4100) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
4817154 (4100) - winsat\main.cpp:2793: > power policy saved.
4817342 (4100) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
4817342 (4100) - winsat\main.cpp:2814: > power policy set to maximum.
4818153 (4100) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
4818153 (4100) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
4818153 (4100) - winsat\main.cpp:1775: > Run Assessment features 
4818231 (4100) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
4831054 (4100) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 11166900
4831054 (4100) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
4831054 (4100) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
4837606 (4100) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
4842707 (4100) - winsat\main.cpp:1948: > Cancel received, waiting 10000ms for d3d to cancel
4842707 (4100) - winsat\main.cpp:1958: > d3d assessment succesfully canceled.
4842739 (4100) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
4842754 (4100) - winsat\main.cpp:2855: > Power state restored.
4842754 (4100) - winsat\main.cpp:2870: > Successfully reenabled EMD.
4842910 (4100) - winsat\main.cpp:2896: > Composition restarted
4842926 (4100) - winsat\watchdog.cpp:0311: Watch dog system shutdown
4842941 (4100) - winsat\main.cpp:4909: > exit value = 3.
 
5783237 (1720) - winsat\logging.cpp:0815: --- START 2012\2\24 12:28:10 PM ---
5783237 (1720) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -restart clean -cancelevent 3670af02-9662-4e9d-8391-f8d02adc7bec
5783237 (1720) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
5783393 (1720) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.
5783425 (1720) - winsat\main.cpp:4585: Watch dog system enabled
5783425 (1720) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
5783581 (1720) - winsat\main.cpp:2490: > DWM Running.
5783908 (1720) - winsat\main.cpp:2497: > turning off DWM.
5783908 (1720) - winsat\main.cpp:2470: > EMD service will be restored on exit.
5784283 (1720) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
5784283 (1720) - winsat\main.cpp:2793: > power policy saved.
5784485 (1720) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
5784485 (1720) - winsat\main.cpp:2814: > power policy set to maximum.
5785297 (1720) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
5785297 (1720) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
5785297 (1720) - winsat\main.cpp:1775: > Run Assessment features 
5785406 (1720) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
5797964 (1720) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 11021900
5797964 (1720) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
5797964 (1720) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
5804547 (1720) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
5810943 (1720) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
5817667 (1720) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
5824515 (1720) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
5830802 (1720) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
5837276 (1720) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
5843703 (1720) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
5850396 (1720) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
5859927 (1720) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
5869459 (1720) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
5875762 (1720) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
5878148 (1720) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_MPEG2_HD_15mbps.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
5885917 (1720) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_VC1_15mbps.wmv -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 135 -expfrmmax 150 -overrideframetype prog
5892766 (1720) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_480i_5sec_6mbps_new.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
5899583 (1720) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_480p_5sec_6mbps_new.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 135 -expfrmmax 150 -overrideframetype prog
5906525 (1720) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_10mbps_h264.mp4 -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 135 -expfrmmax 150 -overrideframetype prog
5913139 (1720) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_480_5sec_6mbps_h264.mp4 -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
5919582 (1720) - winsat\main.cpp:1775: > Run Assessment media -input C:\Windows\Performance\WinSAT\winsatencode.wmv -encode C:\Windows\Performance\WinSAT\winsat.prx
5924481 (1720) - winsat\main.cpp:1775: > Run Assessment moobego 
5924481 (1720) - winsat\main.cpp:1775: > Run Assessment cpu -encryption -up
5927601 (1720) - winsat\main.cpp:1775: > Run Assessment cpu -compression -up
5937647 (1720) - winsat\main.cpp:1775: > Run Assessment cpu -encryption2 -up
5940705 (1720) - winsat\main.cpp:1775: > Run Assessment cpu -compression2 -up
5950767 (1720) - winsat\main.cpp:1775: > Run Assessment cpu -encryption
5960969 (1720) - winsat\main.cpp:1775: > Run Assessment cpu -compression
5971156 (1720) - winsat\main.cpp:1775: > Run Assessment cpu -encryption2
5974432 (1720) - winsat\main.cpp:1775: > Run Assessment cpu -compression2
5984635 (1720) - winsat\main.cpp:1775: > Run Assessment mem 
5989861 (1720) - winsat\main.cpp:1775: > Run Assessment disk -seq -read -n 0
5999860 (1720) - winsat\main.cpp:1775: > Run Assessment disk -ran -read -n 0
6011451 (1720) - winsat\main.cpp:1775: > Run Assessment disk -scen 2009 -drive C:
6079046 (1720) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
6079046 (1720) - winsat\main.cpp:2855: > Power state restored.
6079046 (1720) - winsat\main.cpp:2870: > Successfully reenabled EMD.
6079234 (1720) - winsat\main.cpp:2896: > Composition restarted
6079234 (1720) - winsat\watchdog.cpp:0311: Watch dog system shutdown
6079249 (1720) - winsat\main.cpp:4909: > exit value = 1.
 
8991039 (2964) - winsat\logging.cpp:0815: --- START 2012\2\24 13:21:37 PM ---
8991039 (2964) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\WinSAT.exe" formal
8991039 (2964) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
8991226 (2964) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.
8991289 (2964) - winsat\main.cpp:4585: Watch dog system enabled
8991304 (2964) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
8991507 (2964) - winsat\main.cpp:2490: > DWM Running.
8991788 (2964) - winsat\main.cpp:2497: > turning off DWM.
8991788 (2964) - winsat\main.cpp:2470: > EMD service will be restored on exit.
8992147 (2964) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
8992147 (2964) - winsat\main.cpp:2793: > power policy saved.
8992350 (2964) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
8992350 (2964) - winsat\main.cpp:2814: > power policy set to maximum.
8993176 (2964) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
8993176 (2964) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
8993176 (2964) - winsat\main.cpp:1775: > Run Assessment features 
8993254 (2964) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
9005719 (2964) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 10916300
9005719 (2964) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
9005719 (2964) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
9012286 (2964) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
9018667 (2964) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
9025453 (2964) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
 
9207787 (1232) - winsat\logging.cpp:0815: --- START 2012\2\24 13:25:14 PM ---
9207787 (1232) - winsat\main.cpp:2861: > no need to restore power state (no saver object).
9207787 (1232) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
9207787 (1232) - winsat\main.cpp:4909: > exit value = 4.
 
9622984 (2744) - winsat\logging.cpp:0815: --- START 2012\2\24 13:32:09 PM ---
9622984 (2744) - winsat\main.cpp:2861: > no need to restore power state (no saver object).
9622984 (2744) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
9622984 (2744) - winsat\main.cpp:4909: > exit value = 4.
 
9628958 (3936) - winsat\logging.cpp:0815: --- START 2012\2\24 13:32:15 PM ---
9628958 (3936) - winsat\main.cpp:2861: > no need to restore power state (no saver object).
9628958 (3936) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
9628958 (3936) - winsat\main.cpp:4909: > exit value = 4.
 
9860089 (5076) - winsat\logging.cpp:0815: --- START 2012\2\24 13:36:06 PM ---
9860105 (5076) - winsat\main.cpp:2861: > no need to restore power state (no saver object).
9860105 (5076) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
9860105 (5076) - winsat\main.cpp:4909: > exit value = 4.
 
9864816 (4744) - winsat\logging.cpp:0815: --- START 2012\2\24 13:36:11 PM ---
9864816 (4744) - winsat\main.cpp:2861: > no need to restore power state (no saver object).
9864816 (4744) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
9864816 (4744) - winsat\main.cpp:4909: > exit value = 4.
 
10044030 (3920) - winsat\logging.cpp:0815: --- START 2012\2\24 13:39:10 PM ---
10044046 (3920) - winsat\main.cpp:2861: > no need to restore power state (no saver object).
10044046 (3920) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
10044046 (3920) - winsat\main.cpp:4909: > exit value = 4.
 
10047634 (2636) - winsat\logging.cpp:0815: --- START 2012\2\24 13:39:14 PM ---
10047634 (2636) - winsat\main.cpp:2861: > no need to restore power state (no saver object).
10047649 (2636) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
10047649 (2636) - winsat\main.cpp:4909: > exit value = 4.
 
10077586 (4736) - winsat\logging.cpp:0815: --- START 2012\2\24 13:39:44 PM ---
10077586 (4736) - winsat\main.cpp:2861: > no need to restore power state (no saver object).
10077586 (4736) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
10077602 (4736) - winsat\main.cpp:4909: > exit value = 4.
 
10094965 (2752) - winsat\logging.cpp:0815: --- START 2012\2\24 13:40:01 PM ---
10094965 (2752) - winsat\main.cpp:2861: > no need to restore power state (no saver object).
10094965 (2752) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
10094965 (2752) - winsat\main.cpp:4909: > exit value = 4.
 
122226 (0676) - winsat\logging.cpp:0815: --- START 2012\2\24 15:46:50 PM ---
122226 (0676) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent ab1d3756-35e0-4a31-b91f-ec47d7db028f
122242 (0676) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
122632 (0676) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.
122679 (0676) - winsat\main.cpp:4585: Watch dog system enabled
122679 (0676) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
123693 (0676) - winsat\main.cpp:2490: > DWM Running.
123911 (0676) - winsat\main.cpp:2497: > turning off DWM.
123927 (0676) - winsat\main.cpp:2470: > EMD service will be restored on exit.
125799 (0676) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
125799 (0676) - winsat\main.cpp:2793: > power policy saved.
126033 (0676) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
126033 (0676) - winsat\main.cpp:2814: > power policy set to maximum.
128544 (0676) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
128544 (0676) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
128544 (0676) - winsat\main.cpp:1775: > Run Assessment features 
128669 (0676) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
141508 (0676) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 10799300
141508 (0676) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
141508 (0676) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
148154 (0676) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
154518 (0676) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
161258 (0676) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
168247 (0676) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
174814 (0676) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
181210 (0676) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
187669 (0676) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
194002 (0676) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
202832 (0676) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
211443 (0676) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
217309 (0676) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
220023 (0676) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_MPEG2_HD_15mbps.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
227886 (0676) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_VC1_15mbps.wmv -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 135 -expfrmmax 150 -overrideframetype prog
234157 (0676) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_480i_5sec_6mbps_new.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
241037 (0676) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_480p_5sec_6mbps_new.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 135 -expfrmmax 150 -overrideframetype prog
247823 (0676) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_10mbps_h264.mp4 -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 135 -expfrmmax 150 -overrideframetype prog
254437 (0676) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_480_5sec_6mbps_h264.mp4 -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
260849 (0676) - winsat\main.cpp:1775: > Run Assessment media -input C:\Windows\Performance\WinSAT\winsatencode.wmv -encode C:\Windows\Performance\WinSAT\winsat.prx
265576 (0676) - winsat\main.cpp:1775: > Run Assessment moobego 
265591 (0676) - winsat\main.cpp:1775: > Run Assessment cpu -encryption -up
268820 (0676) - winsat\main.cpp:1775: > Run Assessment cpu -compression -up
278836 (0676) - winsat\main.cpp:1775: > Run Assessment cpu -encryption2 -up
281925 (0676) - winsat\main.cpp:1775: > Run Assessment cpu -compression2 -up
292002 (0676) - winsat\main.cpp:1775: > Run Assessment cpu -encryption
302189 (0676) - winsat\main.cpp:1775: > Run Assessment cpu -compression
312345 (0676) - winsat\main.cpp:1775: > Run Assessment cpu -encryption2
315574 (0676) - winsat\main.cpp:1775: > Run Assessment cpu -compression2
325761 (0676) - winsat\main.cpp:1775: > Run Assessment mem 
330956 (0676) - winsat\main.cpp:1775: > Run Assessment disk -seq -read -n 0
342905 (0676) - winsat\main.cpp:1775: > Run Assessment disk -ran -read -n 0
355744 (0676) - winsat\main.cpp:1775: > Run Assessment disk -scen 2009 -drive C:
426397 (0676) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
426397 (0676) - winsat\main.cpp:2855: > Power state restored.
426397 (0676) - winsat\main.cpp:2870: > Successfully reenabled EMD.
426584 (0676) - winsat\main.cpp:2896: > Composition restarted
426615 (0676) - winsat\watchdog.cpp:0311: Watch dog system shutdown
426615 (0676) - winsat\main.cpp:4909: > exit value = 1.
 
722378 (4072) - winsat\logging.cpp:0815: --- START 2012\2\24 15:56:50 PM ---
722378 (4072) - winsat\main.cpp:2861: > no need to restore power state (no saver object).
722378 (4072) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
722393 (4072) - winsat\main.cpp:4909: > exit value = 4.

Brink · 24 Feb 2012

First, congratulations on getting your BIOS updated to the latest version. To bad it didn't help with this WEI error though.

Do you have the latest NVIDIA 295.73 video drivers installed for your graphics card?

What antivirus program are you using? As a test disable or uninstall it temporarily to see if it may be preventing the WEI score from being updated.

If it's not, then you could do a system restore using a restore point (if available) dated when WEI was working to hopefully fix it.

Ricorik · 25 Feb 2012

Brink everything is up-to-date

Clean install of windows (on my old Pentium 4 computer i have not problems (32 bit) whit rating.

I use AVG, but that is not the problem. i think that the onboard graphics card make problems ATI 4250

PS: i have test windows 8 developer preview same problems
i have test enterprise same problems.

Athlon II X3 455-to-AMD Phenom(tm) II X4 B55 Processor
http://www.cpu-world.com/info/AMD/Un...es_and_L3.html

But that can not be the problem

Edit: I have fully read and check the BIOS settings and have disable onboard graphics card. But that is not the solution. I have check all settings en find nothing strange (i read in the manual) conclusion? i cant find it

When i turnoff the computer and then turn on i get not a signal on screen, but when i turn it of 'hard' then it working well. so i must turn it on two times to get started, also very strange.
now i run this command: winsat.exe formal

Error: Failed to load XML
An invalid character was found in text content.
winsat\main.cpp(1041)
Unable To process XML file.
winsat\main.cpp(4742)