Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: 64Bit Ult won't Boot when 'Memory Remap' is Enabled to use all 4GB RAM

12 Mar 2012   #1
dratninny

Windows 7 Ultimate x64
 
 
64Bit Ult won't Boot when 'Memory Remap' is Enabled to use all 4GB RAM

Hi there!

I will start off by stating my relevant PC Specs for this thread:-

Asus P5B Deluxe MoBo
Intel Dual Core E6600 @ 2.40GHz
GeForce 7900 GS 512Mb
2 x 1GB DDR2 800MHz Corsair Value RAM (original) in Yellow Slots A1 & B1

2 x 1GB DDR2 800MHz Corsair Gaming RAM (NEW) in Black Slots A2 & B2

So I have just installed 2 extra GBs of RAM to bring my total to 4GB. After a successful boot and then checking my 'System' info Windows states 4.00GB of memory is installed but only 2.94GB is usable.

Therefore I went ahead into my BIOS to enable the 'Memory Remap Feature'.

However on reboot the PC gets to the 'Starting Windows' screen and doesn't get any further. The Windows logo doesn't start to appear. It just restarts going through all the usual screens again, eventually giving two options of:-

Launch Startup Repair

or

Start Windows Normally.

The repair never works and Windows will never start normally again until I return to the BIOS to disable the mem remap.

Sometimes I have had a Blue Screen displaying the same errors as this thread:-

Win7 64Bit BSOD's (IRQ_NOT_LESS and BAD_POOL_HEADER)

I reset the CMOS to Factory Default settings and tried again but did nothing. Also I have never updated the BIOS from the original version as I'm a bit scared to do so.

I can't find anyone else on the net having the same problem!

CAN ANYONE HELP?

This is the first time I have ever had to ask for help on a PC Forum! Have always managed to resolve any issues myself, with friends or by researching the net.



Additional:-

Have read about graphics card using part of the mem (which doesn't seem right with the 7900 GS as has it's own onboard mem) and also that voltages to the RAM should be increased.

MCH Voltages

Windows 7 :: Win 7 Wont Boot With 4GB RAM

Windows 7 RC won't boot with 4gb

I have looked hear for info on voltages and clocking but didn't get anywhere. Well got an overclock at 3.60Hz but only ran in Safe Mode. Obviously this is slightly irrelevant the above but was just trying stuff out and trying to learn more.

Asus P5B-Deluxe: Overclocking and Tweaking Guide - The Tech Repository Forums

Tried clock as per this vid and work perfectly running at 2.88GHz.

e6600 and asus p5b overclocking tutorial in english stage 1 - YouTube

Although some areas in BIOS grayed out such as 'Vanderpool Technology' whatever that is. Guessing isn't grayed out on the updated BIOS.


My System SpecsSystem Spec
.
12 Mar 2012   #2
zigzag3143

Win 8 Release candidate 8400
 
 

Are you seeing 2.94 usable in task manager?
My System SpecsSystem Spec
13 Mar 2012   #3
dratninny

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by zigzag3143 View Post
Are you seeing 2.94 usable in task manager?
Task Manager shows 'Physical Memory (Mb)' Total 3007.

When I restart the computer, hitting DEL during the Asus load up screen, it goes to an American MegaTrends screen and reels off loads of info part of which says 3007MB OK. And then goes into the BIOS where under 'System Information' shows Memory 3008MB.

If I then going and enable the 'Memory Remap Feature', PC reboots, press DEL, AMT reeling off info shows 4096MB OK and under the 'System Information' in the BIOS now shows Memory 4096MB.

Exit BIOS and then as per the whole reason for this thread, Windows just won't boot so have to go back and disable the 'Memory Remap Feature' to get Windows to boot again.
My System SpecsSystem Spec
.

13 Mar 2012   #4
cyclic

Windows 7 home premium x64
 
 

Look http://uk.asus.com/Motherboards/Inte...FiAP/#download

Ufortunately a BIOS update appears in order, as you see from the reasons for the updates, certain makes of Ram at 4gb isn't recognised.

Bios updates on Asus board is easy using their live update tool. From here

http://uk.asus.com/Motherboards/Inte...FiAP/#download
My System SpecsSystem Spec
13 Mar 2012   #5
dratninny

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by cyclic View Post
Look ASUS - Motherboards- ASUS P5B Deluxe/WiFi-AP

Ufortunately a BIOS update appears in order, as you see from the reasons for the updates, certain makes of Ram at 4gb isn't recognised.

Bios updates on Asus board is easy using their live update tool. From here

ASUS - Motherboards- ASUS P5B Deluxe/WiFi-AP
Many thanks Cyclic, I will try this out and report the outcome.
My System SpecsSystem Spec
13 Mar 2012   #6
dratninny

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by cyclic View Post
Look ASUS - Motherboards- ASUS P5B Deluxe/WiFi-AP

Ufortunately a BIOS update appears in order, as you see from the reasons for the updates, certain makes of Ram at 4gb isn't recognised.

Bios updates on Asus board is easy using their live update tool. From here

ASUS - Motherboards- ASUS P5B Deluxe/WiFi-AP
Hi Cyclic,

Just flashed my BIOS using my USB Stick. Was successful. Now running the latest 1238 version as per the link you provided.

Went to enable the 'Memory Remap Utility' and the same problem again! All EXACTLY as before!

I noticed that version 0910 includes: 3. Support x4 DIMM. Does version 1238 include updates of all the previous previously released versions such as this? I don't have to flash my BIOS with each version or something silly do I?

Also 20mins ago I recieved this email from ramguy@corsair.com:-

"Dear Lee,
We do not recommend or support mixing memory even if it is the same specification. We can only guarantee memory modules will work as advertised if they are from the same kit. to upgrade your system to 4GB I would recommend purchasing a 4GB. Please use our online memory configurator to find a suitable 4GB kit: Learn & Explore

Ram Guy
Corsair Memory Inc.
46221 Landing Parkway
Fremont Ca. 94538"

Seems a bit ridiculous to me! A waste of existing RAM and more expense to myself!
My System SpecsSystem Spec
Reply

 64Bit Ult won't Boot when 'Memory Remap' is Enabled to use all 4GB RAM




Thread Tools




Similar help and support threads
Thread Forum
Can't boot with graphics card driver enabled
Hello everyone, I've run into a bit of an issue since a recent hd wipe and fresh windows 7 install. After getting windows re-installed, then installing drivers for my video card (AMD Radeon 6500 series), I run into an issue where my computer won't completely boot. It just goes to a blue...
General Discussion
How to make the internal wireless adapter be enabled on boot?
Today I installed windows 7 on my laptop. After installation of drivers and updates, I found the wireless adapter was not enabled by default. Then I checked the device manager to make sure that my driver worked. I didn't find any question marks or exclamation marks in device manager. And then I...
Hardware & Devices
64bit Windows won't use all my memory
The title about sums it up, but to avoid answers that don't answer the question, let me offer a few specifics. I have 4gb installed but only 2.75 is usable. I have a total of 1gb of video ram on my two video cards. I am running 64bit Windows. My board recognizes up to 8gb of ram...
Performance & Maintenance
Win 7 Ult 64Bit Won't Boot when 'Memory Remap Feature' is Enabled
Hi there, I will start off by stating my relevant PC Specs for this thread:- Asus P5B Deluxe MoBo Intel Dual Core E6600 @ 2.40GHz GeForce 7900 GS 512Mb 2 x 1GB DDR2 800MHz Corsair Value RAM (original) in Yellow Slots A1 & B1 2 x 1GB DDR2 800MHz Corsair Gaming RAM (NEW) in Black Slots A2...
Hardware & Devices
No boot sector on internal hard drive while AHCI enabled installation
hi everybody! I have a dell studio 1536 my hard disk got corrupted a month ago and tried different software could not make it to work so, decided to buy another HD . my new hard drive is (used) bought in ebay and SMART shows 100% health also tested on dell diagnosetic utility and all tests passed...
Installation & Setup
Win 7 64bit memory question
Hello, I have 4GB installed on my laptop and as you can see from the window capture it reads 3.74 GB usable. Shouldn't it recognize all 4GB? Or is the other .26 GB being used by the graphics card? Thanks
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:19.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App