Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Waking from sleep - one core goes 100% load!

02 Apr 2012   #11
cluberti

Windows 8.1 x64
 
 

Yes, but it can't be opened and debugged with the debugger , which is a bit more important.

Sent from my SGH-i917 using Board Express


My System SpecsSystem Spec
03 Apr 2012   #12
benko

Windows 7 x64 Ultimate
 
 

Ok, here it is


MEMORY.rar
My System SpecsSystem Spec
06 Apr 2012   #13
benko

Windows 7 x64 Ultimate
 
 

Any news on this, is it ok now ?
My System SpecsSystem Spec
06 Apr 2012   #14
cluberti

Windows 8.1 x64
 
 

Still can't make this load properly - something's up with the data in this dump. I hate to ask, but can you take another? This one still only has user-mode context data in it.
My System SpecsSystem Spec
07 Apr 2012   #15
benko

Windows 7 x64 Ultimate
 
 

Maybe I am doing smth wrong ?

Here is new one

MEMORYdump.rar
My System SpecsSystem Spec
09 Apr 2012   #16
benko

Windows 7 x64 Ultimate
 
 

Using Process explorer I found that Interrupts is the one I should me watching!

Searching a little bit I have found that problem could be in ATA Channel, that it can be switched to PIO mode, but on mine, it says that DMA is enabled!

Also, when waking from sleep I hear that sound like when you remove USB from PC, even thought I haven't removed anything...

Here are the errors I get in event log
Code:
1. The server could not bind to the transport \Device\NetBT_Tcpip_{82C32301-772F-42A6-B96C-C167143DB45A} because another computer on the network has the same name.  The server could not start.
2. The name "BENKO-PC       :20" could not be registered on the interface with IP address 192.168.1.81. The computer with the IP address 192.168.1.80 did not allow the name to be claimed by this computer.
3. The name "BENKO-PC       :0" could not be registered on the interface with IP address 192.168.1.81. The computer with the IP address 192.168.1.80 did not allow the name to be claimed by this computer.

For first source is server, for 2nd and 3rd source is NetBT


Attached Thumbnails
-untitled.jpg  
My System SpecsSystem Spec
10 Apr 2012   #17
cluberti

Windows 8.1 x64
 
 

Well, interrupts (and the system process) would indicate a driver issue or a system configuration issue, but it's unfortunately not easy to tell from a process explorer snapshot. As I said initially, my suspicion is a networking issue, but all of the "easy" tests sort of dispel that.

Let me think about what to do here - dumping it hasn't been successful, but more info is good. Let's see if I can come up with something that'll spill the beans, so to speak, that we can do here.
My System SpecsSystem Spec
11 Apr 2012   #18
benko

Windows 7 x64 Ultimate
 
 

Quote   Quote: Originally Posted by cluberti View Post
Well, interrupts (and the system process) would indicate a driver issue or a system configuration issue, but it's unfortunately not easy to tell from a process explorer snapshot. As I said initially, my suspicion is a networking issue, but all of the "easy" tests sort of dispel that.

Let me think about what to do here - dumping it hasn't been successful, but more info is good. Let's see if I can come up with something that'll spill the beans, so to speak, that we can do here.
So you still weren't able to debug my dump, or you managed to but it didn't help ?

I highly doubt it is network since with it disabled issues still remained.

Thanks for your time and help!
My System SpecsSystem Spec
11 Apr 2012   #19
cluberti

Windows 8.1 x64
 
 

Unfortunately, when your machine crashes and dumps, it only seems to save the user-mode portion of data (the kernel-mode stacks and such are not included). This probably has something to do with your issue, and in a customer scenario I'd just set up a kernel debugger and crash cart, but that's difficult over the internet .
My System SpecsSystem Spec
Reply

 Waking from sleep - one core goes 100% load!




Thread Tools





Similar help and support threads
Thread Forum
Waking from Sleep understood but wont go back to sleep
I setup 2 Media center PC's and have them both goto sleep when not being used. They wake up in the middle of the night due to mcupdate_scheduled which I understand and know how to turn off. My problem is I want to leave it the option on and have the computers go back to sleep after the update is...
Media Center
CPU usage causing i5 core 3 to spike after waking up from sleep...
So, my CPU usage (Intel i5) meter always reads just fine, usually around 5-10% during normal tasks. Well, after my computers been in sleep mode, and wakes up, it always shows that Core 3 is usually up around 50-60% and Core 1 around 20-30% or so... It never goes back down until a restart/shut...
Performance & Maintenance
Core 1 @ 100% Usage, Random, but usually after waking from sleep mode
A brand new i5 intel desktop with hd graphics, 4g ram, win 7 home premium 64 bit. I have update all the drivers. I have done several virus scans with avast! internet security + a boot time scan and Superantispyware program found nothing. After several reboots, this still occurs. Updated virus...
Hardware & Devices
CPU-Z and Core Temp "Core Multiplier" readings different under load
CPU-Z and "Core Temp" both agree that my bus speed is 133 mhz But they greatly disagree about the core speed multiplier depending on loading This is really cool I use a free utility called "Intel Processor Identification Utility" to generate Full Load When run, it Loads all the Processor...
PC Custom Builds and Overclocking
6 core computer so slow to load.
Hey People I recently bought an AMD 6 core pc It's really slow to load, it takes a good 3 minutes to load, and theres hardly anything to load, where as my dual core laptop loads just as fast :/ Why is this? Thanks
General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:18.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App