SSD Performance reduced after BIOS update.

Hello,

Week ago I bought new SSD drive. (OCZ Agility 3, 2.15 firmware)
I made fresh install of OS, newest drivers etc.
SSD and my system was working very well but I was disapointed to my SSD-benchmark results. Well I tried to increase performance by updating my motherboard bios. Bios update succeed but it didnt really increase performance of my ssd, new bios reduced writing performance notable. (MOBO = Asus m4a87td/usb, bios v.2001) AHCI is on.



What with that 103424? Shouldnt it be 1024? Previous score over 400 points, now just 300. (disappeared in picture)

Also noticed another problem. I can't boot my comp if I have external drive plugged in.
I just can't change my 1st device boot to agility drive in bios because it's not in the list of boot devices. Well I unplug external drive and its working. Also thought that bios update would fix it but it didnt.

-Valtsu

Your numbers are lower than most, but I don't know if it would be noticed in real life as opposed to a benchmark.

I think that 103424 is a reference to alignment. If it's evenly divisible by 4, it should be OK--and it is.

Not sure about the BIOS/external drive issue. Was the external connected when you did the clean install to the SSD?

One way or another, I'd make sure all boot files were on the SSD and that it appeared in the BIOS and was bootable, regardless of whether the external was plugged in.

ignatzatsonic said:

Not sure about the BIOS/external drive issue. Was the external connected when you did the clean install to the SSD?

It wasnt plugged in while I was installing OS

ignatzatsonic said:

I'd make sure all boot files were on the SSD

How?



Thanks for your comment.

valtsu said:

ignatzatsonic said:

Not sure about the BIOS/external drive issue. Was the external connected when you did the clean install to the SSD?

It wasnt plugged in while I was installing OS

ignatzatsonic said:

I'd make sure all boot files were on the SSD

How?

If you can boot with no other drive connected, that means your boot files are on the SSD, as you would want.

But I'm not sure why plugging in an external should keep you from booting.

And it is VERY strange that you can boot from the SSD but it is NOT shown in the BIOS list of boot devices.

Is the SSD shown as Disc 0 in Windows Disk Management?

Post a picture of Windows Disk Management if possible.

ignatzatsonic said:

And it is VERY strange that you can boot from the SSD but it is NOT shown in the BIOS list of boot devices.

It's there when my external isn't plugged in but disappear if my external drive is plugged in. Also my hdd disappears, only WD external, Dvd drive and some removable thing.

ignatzatsonic said:

Is the SSD shown as Disc 0 in Windows Disk Management?

It's shown as Disc 1.




EDIT: Picture with external drive plugged.

If I read that correctly, C is shown as primary, boot, crash dump, page file.

System reserved is primary, active, and system.

D is primary.

F is the external and also is primary.

Hmmmm. I don't see anything wrong at first glance.

Valtsu:


Is your BIOS set to defaults in all cases?

Or have you made some changes in the BIOS?

Did you have this issue with the old BIOS??

Or did it begin after you flashed to the new BIOS?