Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Assesing disk performance (WEI can not rated)

27 May 2012   #11
Ricorik

Windows ultimate sp 1 64 bit
 
 

Code:
 
Winsat log:
 
8817597 (7840) - winsat\logging.cpp:0815: --- START 2012\5\27 2:34:06 ---
8817644 (7840) - winsat\main.cpp:4301: Command Line = C:\Windows\system32\winsat.exe formal -log -cancelevent ff1237c3-0cfd-4c12-a131-41a9ea8dfde7
8817675 (7840) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
8818330 (7840) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.
8818393 (7840) - winsat\main.cpp:4585: Watch dog system enabled
8818408 (7840) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
8819204 (7840) - winsat\main.cpp:2490: > DWM Running.
8819610 (7840) - winsat\main.cpp:2497: > turning off DWM.
8819641 (7840) - winsat\main.cpp:2470: > EMD service will be restored on exit.
8820436 (7840) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
8820436 (7840) - winsat\main.cpp:2793: > power policy saved.
8851902 (7840) - winsat\main.cpp:2800: ERROR: Can't write to registry Failsafe to ensure power policy is restored.
8851902 (7840) - winsat\main.cpp:2845: ERROR: Can't remove RunOnce Key
8852011 (7840) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
8852011 (7840) - winsat\main.cpp:2855: > Power state restored.
8852011 (7840) - winsat\main.cpp:2870: > Successfully reenabled EMD.
8852136 (7840) - winsat\watchdog.cpp:0311: Watch dog system shutdown
8852136 (7840) - winsat\main.cpp:4909: > exit value = 1.
 
17816328 (8004) - winsat\logging.cpp:0815: --- START 2012\5\27 5:04:04 ---
17816328 (8004) - winsat\main.cpp:4301: Command Line = C:\Windows\system32\winsat.exe formal -log -cancelevent a27c55f0-0f6b-441e-a757-fb92b56e89d2
17816328 (8004) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
17816515 (8004) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.
17816546 (8004) - winsat\main.cpp:4585: Watch dog system enabled
17816546 (8004) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
17816764 (8004) - winsat\main.cpp:2490: > DWM Running.
17817045 (8004) - winsat\main.cpp:2497: > turning off DWM.
17817045 (8004) - winsat\main.cpp:2470: > EMD service will be restored on exit.
17817576 (8004) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
17817591 (8004) - winsat\main.cpp:2793: > power policy saved.
17848979 (8004) - winsat\main.cpp:2800: ERROR: Can't write to registry Failsafe to ensure power policy is restored.
17848994 (8004) - winsat\main.cpp:2845: ERROR: Can't remove RunOnce Key
17849088 (8004) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
17849088 (8004) - winsat\main.cpp:2855: > Power state restored.
17849088 (8004) - winsat\main.cpp:2870: > Successfully reenabled EMD.
17849228 (8004) - winsat\watchdog.cpp:0311: Watch dog system shutdown
17849228 (8004) - winsat\main.cpp:4909: > exit value = 1.
 
22612266 (7952) - winsat\logging.cpp:0815: --- START 2012\5\27 6:24:00 ---
22612266 (7952) - winsat\main.cpp:4301: Command Line = C:\Windows\system32\winsat.exe formal -log -cancelevent f29af69c-fd0d-4df5-999d-163d82333469
22612266 (7952) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
22612454 (7952) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.
22612485 (7952) - winsat\main.cpp:4585: Watch dog system enabled
22612485 (7952) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
22612703 (7952) - winsat\main.cpp:2490: > DWM Running.
22613000 (7952) - winsat\main.cpp:2497: > turning off DWM.
22613000 (7952) - winsat\main.cpp:2470: > EMD service will be restored on exit.
22613405 (7952) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
22613405 (7952) - winsat\main.cpp:2793: > power policy saved.
22644793 (7952) - winsat\main.cpp:2800: ERROR: Can't write to registry Failsafe to ensure power policy is restored.
22644793 (7952) - winsat\main.cpp:2845: ERROR: Can't remove RunOnce Key
22644886 (7952) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
22644886 (7952) - winsat\main.cpp:2855: > Power state restored.
22644886 (7952) - winsat\main.cpp:2870: > Successfully reenabled EMD.
22645027 (7952) - winsat\watchdog.cpp:0311: Watch dog system shutdown
22645027 (7952) - winsat\main.cpp:4909: > exit value = 1.
 
158871 (3780) - winsat\logging.cpp:0815: --- START 2012\5\27 9:36:25 ---
158871 (3780) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent a99c20ae-a800-4598-a469-0ef78b25af2e
158871 (3780) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
159199 (3780) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.
159245 (3780) - winsat\main.cpp:4585: Watch dog system enabled
159245 (3780) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
159464 (3780) - winsat\main.cpp:2490: > DWM Running.
159776 (3780) - winsat\main.cpp:2497: > turning off DWM.
159776 (3780) - winsat\main.cpp:2470: > EMD service will be restored on exit.
159947 (3780) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
159947 (3780) - winsat\main.cpp:2793: > power policy saved.
164752 (3780) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
164768 (3780) - winsat\main.cpp:2814: > power policy set to maximum.
165626 (3780) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
165626 (3780) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
165626 (3780) - winsat\main.cpp:1775: > Run Assessment features 
165735 (3780) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
178636 (3780) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 52622900
178636 (3780) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
178636 (3780) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
185001 (3780) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
191319 (3780) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
197824 (3780) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
204720 (3780) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
211162 (3780) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
217278 (3780) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
228213 (3780) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
239024 (3780) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
247542 (3780) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
255732 (3780) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
261613 (3780) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
263953 (3780) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_MPEG2_HD_15mbps.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
271067 (3780) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_VC1_15mbps.wmv -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 135 -expfrmmax 150 -overrideframetype prog
277369 (3780) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_480i_5sec_6mbps_new.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
284202 (3780) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_480p_5sec_6mbps_new.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 135 -expfrmmax 150 -overrideframetype prog
290676 (3780) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_10mbps_h264.mp4 -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 135 -expfrmmax 150 -overrideframetype prog
297135 (3780) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_480_5sec_6mbps_h264.mp4 -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
303390 (3780) - winsat\main.cpp:1775: > Run Assessment media -input C:\Windows\Performance\WinSAT\winsatencode.wmv -encode C:\Windows\Performance\WinSAT\winsat.prx
307711 (3780) - winsat\main.cpp:1775: > Run Assessment moobego 
307711 (3780) - winsat\main.cpp:1775: > Run Assessment cpu -encryption -up
310878 (3780) - winsat\main.cpp:1775: > Run Assessment cpu -compression -up
321003 (3780) - winsat\main.cpp:1775: > Run Assessment cpu -encryption2 -up
324076 (3780) - winsat\main.cpp:1775: > Run Assessment cpu -compression2 -up
334185 (3780) - winsat\main.cpp:1775: > Run Assessment cpu -encryption
337414 (3780) - winsat\main.cpp:1775: > Run Assessment cpu -compression
347648 (3780) - winsat\main.cpp:1775: > Run Assessment cpu -encryption2
350861 (3780) - winsat\main.cpp:1775: > Run Assessment cpu -compression2
361095 (3780) - winsat\main.cpp:1775: > Run Assessment mem 
366321 (3780) - winsat\main.cpp:1775: > Run Assessment disk -seq -read -n 0
378489 (3780) - winsat\main.cpp:1775: > Run Assessment disk -ran -read -n 0
391375 (3780) - winsat\main.cpp:1775: > Run Assessment disk -scen 2009 -drive C:
464383 (3780) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
464383 (3780) - winsat\main.cpp:2855: > Power state restored.
464383 (3780) - winsat\main.cpp:2870: > Successfully reenabled EMD.
464570 (3780) - winsat\main.cpp:2896: > Composition restarted
464586 (3780) - winsat\watchdog.cpp:0311: Watch dog system shutdown
464586 (3780) - winsat\main.cpp:4909: > exit value = 1.
 
058313 (3128) - winsat\logging.cpp:0815: --- START 2012\5\27 9:49:26 ---
058313 (3128) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent ca56c8a2-8bd4-4c39-a062-7d154e228a7b
058328 (3128) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
058609 (3128) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.
058656 (3128) - winsat\main.cpp:4585: Watch dog system enabled
058656 (3128) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
058874 (3128) - winsat\main.cpp:2490: > DWM Running.
059139 (3128) - winsat\main.cpp:2497: > turning off DWM.
059155 (3128) - winsat\main.cpp:2470: > EMD service will be restored on exit.
060731 (3128) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
060731 (3128) - winsat\main.cpp:2793: > power policy saved.
060949 (3128) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
060949 (3128) - winsat\main.cpp:2814: > power policy set to maximum.
062025 (3128) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
062025 (3128) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
062025 (3128) - winsat\main.cpp:1775: > Run Assessment features 
062181 (3128) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
075005 (3128) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 51367300
075005 (3128) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
075005 (3128) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
081728 (3128) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
088140 (3128) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
094739 (3128) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
101509 (3128) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
107874 (3128) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
113958 (3128) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
124426 (3128) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
135128 (3128) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
143630 (3128) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
151835 (3128) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
157857 (3128) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
160197 (3128) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_MPEG2_HD_15mbps.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
167451 (3128) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_VC1_15mbps.wmv -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 135 -expfrmmax 150 -overrideframetype prog
173785 (3128) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_480i_5sec_6mbps_new.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
180539 (3128) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_480p_5sec_6mbps_new.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 135 -expfrmmax 150 -overrideframetype prog
186998 (3128) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_10mbps_h264.mp4 -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 135 -expfrmmax 150 -overrideframetype prog
193425 (3128) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_480_5sec_6mbps_h264.mp4 -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
199977 (3128) - winsat\main.cpp:1775: > Run Assessment media -input C:\Windows\Performance\WinSAT\winsatencode.wmv -encode C:\Windows\Performance\WinSAT\winsat.prx
204252 (3128) - winsat\main.cpp:1775: > Run Assessment moobego 
204252 (3128) - winsat\main.cpp:1775: > Run Assessment cpu -encryption -up
207372 (3128) - winsat\main.cpp:1775: > Run Assessment cpu -compression -up
217402 (3128) - winsat\main.cpp:1775: > Run Assessment cpu -encryption2 -up
220491 (3128) - winsat\main.cpp:1775: > Run Assessment cpu -compression2 -up
230569 (3128) - winsat\main.cpp:1775: > Run Assessment cpu -encryption
234032 (3128) - winsat\main.cpp:1775: > Run Assessment cpu -compression
244250 (3128) - winsat\main.cpp:1775: > Run Assessment cpu -encryption2
247433 (3128) - winsat\main.cpp:1775: > Run Assessment cpu -compression2
257604 (3128) - winsat\main.cpp:1775: > Run Assessment mem 
262799 (3128) - winsat\main.cpp:1775: > Run Assessment disk -seq -read -n 0
274951 (3128) - winsat\main.cpp:1775: > Run Assessment disk -ran -read -n 0
286620 (3128) - winsat\main.cpp:1775: > Run Assessment disk -scen 2009 -drive C:
354683 (3128) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
354683 (3128) - winsat\main.cpp:2855: > Power state restored.
354683 (3128) - winsat\main.cpp:2870: > Successfully reenabled EMD.
354871 (3128) - winsat\main.cpp:2896: > Composition restarted
354871 (3128) - winsat\watchdog.cpp:0311: Watch dog system shutdown
354871 (3128) - winsat\main.cpp:4909: > exit value = 1.



My System SpecsSystem Spec
.
27 May 2012   #12
Ricorik

Windows ultimate sp 1 64 bit
 
 

Quote   Quote: Originally Posted by A Guy View Post
If you choose to, so be it. Your problem is not common, nor easy to fix. It appears you have an invalid character in SMBIOS. This will not easily be fixed. Unless you can reprogram SMBIOS, I personally am unaware of any fix. I'm assuming that others also do not have a fix. So short of them posting to say they don't know how to fix it, they don't reply. It is appearing a Motherboard replacement is the likely fix. You can try a Repair Install, or a Clean Install, but if it is hardware, then neither will fix the issue. A Guy

I have done everything i know (and what you told now) many times!!!! (a clean install of different Win versions make not a different) Vista WEI works great, Win 7 (64 bit) sucks (i have replace my motherboard) already months ago.
My System SpecsSystem Spec
27 May 2012   #13
Ricorik

Windows ultimate sp 1 64 bit
 
 

xml - Delphi, IXMLDOMDocument2, Load fails due to invalid character - Stack Overflow

I receive "An invalid character was found in text content" error when loading XML into IXMLDOMDocument2. The character is 1B (in Hex) and is present within a CDATA section. Microsoft's XML viewer (IE) loads the file just fine. The XML looks like...
<data><child><![CDATA[-- ]]></child></data>





xml - Delphi, IXMLDOMDocument2, Load fails due to invalid character - Stack Overflow
My System SpecsSystem Spec
.

03 Jun 2012   #14
Ricorik

Windows ultimate sp 1 64 bit
 
 

Still on my own here....

I have heard that i must assembling my computer.

HWinfo told that DMI is based on BIOS and may not be accurate.

TO be Filled bye OEM, like that stuff. Looking now for a DMI program.
My System SpecsSystem Spec
05 Jun 2012   #15
Ricorik

Windows ultimate sp 1 64 bit
 
 

SOLVED!

Look

Event Id 10: Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x800

Yes im feeling great i solve the problem on my own! I can rate WEI !!!

For more People whit this problem:

"C:\Windows\System32\wbem\Repository." You can achieve this without rebooting or safe mode, and without altering any file or folder privileges by :

in service manager stop Windows Management Instrumentation Service, it will also stop it's dependencies Security Center, and IP Helper

in administrator elevated command prompt (left hit win key to open start menu search, type cmd then ctrl+left shift and press enter) use an admin accounts log in details :

this will start a cmd shell with full admin privileges. using that :

c:
cd \
md backupres
cd \
cd windows\system32\wbem\repository
move * c:\backupres
exit

service manager start first Windows Management Instrumentation Service and then Security Center, and IP Helper.

you may wish to use computer manager -> Services and Applications -> WMI Control
right click it, select properties, use the Backup and restore tab to create a repository backup to resolve this issue quicker if it happens again.

using this method I have not had any problems with MS DTC, though that may be entirely coincidental.

Note: I found this link it is working for the solution in the problem.
http://www.msfn.org/board/topic/1143...ificationeven/
My System SpecsSystem Spec
05 Jun 2012   #16
A Guy

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium x64 SP1
 
 

Good job, that was a tough one! Thanks for sharing the fix, it may help someone else one day

A Guy
My System SpecsSystem Spec
Reply

 Assesing disk performance (WEI can not rated)




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Does a full hard disk have influence on performance ?
Hi all. I am using 7 sp1 on Dell Inspiron 1520. with 1 GB Ram and 180 GB hard disc. I always keep a large empty space on drive C. But for other drives, i always keep the amount just low enough, until the color of the bar indicates do not be red and stay always blue. Is this behavior...
General Discussion
Disk Read error - CTL ALT DEL and other performance issues.
I had major problems with Windows VISTA and installed Windows 7 as a fix. Problems persist, in no particular order; a) when booting, I get the dreaded Disk Read Error - CTL ALT DEL and I cannot escape it. b) My disk drives won't read my install disk, even if I alter the boot sequence in BIOS,...
Performance & Maintenance
Slow performance only on one hard disk
I recently suffered a motherboard failure and, as a result, had to reinstall everything; so this is a clean, fresh Windows install. During the upgrade, I also upgraded my Windows from Win7 32-bit to Win7 64-bit, because I added more memory during the upgrade. All of my hard drives were carried...
Performance & Maintenance
About gaming performance and disk drives!
I just saved my Oblivion disc image to my computer using Daemon Tools' Disc Imaging. This will save the game disc from being scratched and other unpleasant things like that. But a question came up: Does it have any effect on my game performance if I play Oblivion by image mounting on Daemon...
Gaming
Top rated photos? How to rate them and add them to Top rated photos?
My Pictue Library contains about 37gb (18000 files). They all are indexed in Personalization > Library.I rated a lot of photos in specific folders like Wallpapers. But I also rated some Travel photos.Not all of them are displayed in Top rated Photos. I have no clue why, its a pretty clean...
Music, Pictures & Video
Win Virtual Hard Disk Performance Whitepaper from MS.
Source - Windows Virtual Hard Disk Performance Whitepaper from Microsoft - Available for download - Softpedia
News


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 10:02.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App