Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Mouse lag even after reformatting- sfc /scannow log


09 Aug 2012   #1

Windows 7 Home 64bit
 
 
Mouse lag even after reformatting- sfc /scannow log

Hi guys... wasnt sure which section to post this. hopefully this one will do.
I'm on a dell inspiron zino hd... windows 7 64 bit

I had the google redirect virus.. tried removing it myself through different methods.. still remained, so I decided to back up all my things and just reformat and reinstall.
yesterday I did a dell factory image restore though, instead of doing a OS re-installation using my windows 7 disc, entering my product key etc (probably should have...)

long story short: my mouse is lagging. i should note it started to lag before i did the factory restore also. at that point i figured it was just the virus/malware.

but it's still here and driving me crazy. i googled and poked around the forums- following different advice to no avail. i performed all of the dell hardware diagnostic tests- passed them.

I've done sfc /scannow 3+ times. tells me there are corrupt files but are unable to fix them. log shows:

2012-08-09 15:48:26, Info CSI 00000200 [SR] Cannot repair member file [l:20{10}]"tcpmon.ini" of Microsoft-Windows-Printing-StandardPortMonitor-TCPMonINI, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2012-08-09 15:48:38, Info CSI 00000202 [SR] Cannot repair member file [l:20{10}]"tcpmon.ini" of Microsoft-Windows-Printing-StandardPortMonitor-TCPMonINI, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2012-08-09 15:48:38, Info CSI 00000203 [SR] This component was referenced by [l:202{101}]"Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7600.16385.WindowsFoundationDelivery"
2012-08-09 15:48:38, Info CSI 00000206 [SR] Could not reproject corrupted file [ml:520{260},l:46{23}]"\??\C:\Windows\System32"\[l:20{10}]"tcpmon.ini"; source file in store is also corrupted




would reinstalling the OS with my disc fix this? i'm no good at this kind of stuff, but i'm trying. so any advice is greatly appreciated!

My System SpecsSystem Spec
.

09 Aug 2012   #2
Microsoft MVP

W 7 64-bit Ultimate
 
 

Hello thehoneybee221, welcome to Seven Forums!


As it seems you have a Windows 7 install disk, take your tine and study the info presented below, this may be the best bet to get a fresh start and ask if you have any further question.


information   Information

As a start and to rule out format errors up front, boot the Windows 7 installation media to diskpart and run the clean command, once the clean finishes, exit diskpart and use the Windows 7 installer to create and format a single 100GB partition to do the install to.

If that does't work, after another clean, use diskpart to create, format and mark Active a single 100GB partition to see if that works, use Step #2 in the SSD/HDD tutorial for reference.

Once the clean finishes, exit diskpart and use the Windows 7 installer to create and format a single 100GB partition to do the install to and be sure to post back with any further questions you may have and to keep us informed.

After you have copied out or made back-ups of the data you need to external media and want to start fresh with a clean installation or clean install with an upgrade version of Windows 7 have a look through the information below and be sure to post back with any further questions you may have and to keep us informed.

It may be a help to over-write the HDD Master Boot Record (MBR) before you start any other procedure using the diskpart clean command, rather than the clean all; it takes just seconds to complete so you will have "unallocated" space to use either the Windows installer to create and format the partition(s) or use diskpart to create them, however you choose.
SSD / HDD : Optimize for Windows Reinstallation

DISKPART : At PC Startup
If you want to completely wipe / over-write the entire Hard Disk Drive of any possible format errors, malware infection, for security purposes or just to get the best possible place to install Windows to, have a look at these tutorials.
Secure Erase / Wipe : Definition and Methods

Additional Secure Erase / Wipe Information

My System SpecsSystem Spec
09 Aug 2012   #3

Windows 7 Home 64bit
 
 

Quote   Quote: Originally Posted by Bare Foot Kid View Post
Hello thehoneybee221, welcome to Seven Forums!


As it seems you have a Windows 7 install disk, take your tine and study the info presented below, this may be the best bet to get a fresh start and ask if you have any further question.


information   Information

As a start and to rule out format errors up front, boot the Windows 7 installation media to diskpart and run the clean command, once the clean finishes, exit diskpart and use the Windows 7 installer to create and format a single 100GB partition to do the install to.

If that does't work, after another clean, use diskpart to create, format and mark Active a single 100GB partition to see if that works, use Step #2 in the SSD/HDD tutorial for reference.

Once the clean finishes, exit diskpart and use the Windows 7 installer to create and format a single 100GB partition to do the install to and be sure to post back with any further questions you may have and to keep us informed.

After you have copied out or made back-ups of the data you need to external media and want to start fresh with a clean installation or clean install with an upgrade version of Windows 7 have a look through the information below and be sure to post back with any further questions you may have and to keep us informed.

It may be a help to over-write the HDD Master Boot Record (MBR) before you start any other procedure using the diskpart clean command, rather than the clean all; it takes just seconds to complete so you will have "unallocated" space to use either the Windows installer to create and format the partition(s) or use diskpart to create them, however you choose.
SSD / HDD : Optimize for Windows Reinstallation

DISKPART : At PC Startup
If you want to completely wipe / over-write the entire Hard Disk Drive of any possible format errors, malware infection, for security purposes or just to get the best possible place to install Windows to, have a look at these tutorials.
Secure Erase / Wipe : Definition and Methods

Additional Secure Erase / Wipe Information


thanks for the info. i will try this. but first i have to admit, i don't know how to do half of this..

for example- the first part. what is diskpart? and to create and format a single 100gb partition... how? lol i'm sorry. i just dont know about this stuff. can you explain how? also, for my own curiosity, why create a new partition?


thanks.
My System SpecsSystem Spec
.


09 Aug 2012   #4
Microsoft MVP

W 7 64-bit Ultimate
 
 

Hello again.

I was concerned some of this would be too advanced; the reason to start this is to completely over-write the virus you encountered, a simple delete/format removes nothing.

let's take this one step at a time, start with this, it's very easy taken like this.


Note   Note

boot the Windows 7 installation media to diskpart and run the clean command, once the clean finishes, exit diskpart and use the Windows 7 installer to create and format a single 100GB partition to do the install to.


Start with this tutorial ...
DISKPART : At PC Startup

once in diskpart, type clean and hit enter, it only takes seconds to complet.
How to Do a Clean Installation with Windows 7
then start a clean install from this tutorial and you can use the installer to create a 100GB partition or let the installer use all the available space to do the install to.

We'll pick it up from here, if I'm not available to help I'm sure someone else will help.
My System SpecsSystem Spec
09 Aug 2012   #5

Windows 7 Home 64bit
 
 

Quote   Quote: Originally Posted by Bare Foot Kid View Post
Hello again.

I was concerned some of this would be too advanced; the reason to start this is to completely over-write the virus you encountered, a simple delete/format removes nothing.

let's take this one step at a time, start with this, it's very easy taken like this.


Note   Note

boot the Windows 7 installation media to diskpart and run the clean command, once the clean finishes, exit diskpart and use the Windows 7 installer to create and format a single 100GB partition to do the install to.


Start with this tutorial ...
DISKPART : At PC Startup

once in diskpart, type clean and hit enter, it only takes seconds to complet.
How to Do a Clean Installation with Windows 7
then start a clean install from this tutorial and you can use the installer to create a 100GB partition or let the installer use all the available space to do the install to.

We'll pick it up from here, if I'm not available to help I'm sure someone else will help.


THANK YOU! i will do this tomorrow afternoon and report back.
My System SpecsSystem Spec
Reply

 Mouse lag even after reformatting- sfc /scannow log




Thread Tools



Similar help and support threads for2: Mouse lag even after reformatting- sfc /scannow log
Thread Forum
Solved BSOD after reformatting my PC BSOD Help and Support
Questions about reformatting? Installation & Setup
reformatting my HDD General Discussion
Reformatting HDD? Installation & Setup
Reformatting Installation & Setup
Reformatting & Reinstalling Installation & Setup
usb dvd's not reformatting Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:50 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33