Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: This device can perform faster


06 Sep 2012   #1

Windows 7 Ultimate x86
 
 
This device can perform faster

I use HP Pavilion dv6840eo notebook. After installing Windows 7 I experience problem.

When I make video chat in Skype after 3-5 minutes I receive error message:

This device can perform faster.

After receiving this error message in Device Manager I found that under "Universal Serial Bus Controllers" previous "USB Composite Device" became "Unrecognised device". After 1 or 2 restarts "Unrecognised device" becomes again "USB Composite Device".

What is recommended to do?

My System SpecsSystem Spec
.

06 Sep 2012   #2

Dual-boot: Windows 7 HP 32-bit SP1 & Windows XP Pro 32-bit SP2.
 
 

That is not a error message at all, it is just a message telling you that it can run faster in the right settings. You can ignore it.
My System SpecsSystem Spec
06 Sep 2012   #3
Microsoft MVP

Windows 8.1 Pro with Media Center 64 bit
 
 

What that message is telling you is that a USB device could run faster if it was plugged into a matching USB port. This will be displayed if a USB 3 device is plugged into a USB 2 port, or a USB 2 device is plugged into a USB 1 port. The answer is to move the device to a port that has the correct speed to match the device. If you device is USB 3 but all you have is USB 2 ports on your PC then yes you can ignore the message. It can also happen if a USB port fails to run at its full speed. In that case I wouldn't ignore it, I would try to find out why and fix it. I would try reinstalling or updating your chip-set drivers. If its just a corrupted driver that should fix it.
My System SpecsSystem Spec
.


06 Sep 2012   #4

Windows 7 Ultimate x86
 
 

I have installed chipset driver from hp website. The problem is drivers for Windows7 are missing. That is why I just try installing Windows Vista drivers.

After this warning message WebCam disappeares from Device Manager. My Device Manager is like in attached picture. Camera became Unknown Device

Except installing correct chipset driver is it possible to solve this problem by the other way?

P.S. My webcam is built-in webcam not USB webcam.


Attached Thumbnails
This device can perform faster-devmgmt.jpg  
My System SpecsSystem Spec
06 Sep 2012   #5
Microsoft MVP

Windows 8.1 Pro with Media Center 64 bit
 
 

Did you try installing in compatibility mode?
My System SpecsSystem Spec
07 Sep 2012   #6

Windows 7 Ultimate x86
 
 

When I try to install chipset driver into my system after pressing Next button several times I get information that "Chipset Driver installed successfully on your system. Please, press Finish". However I am sure it is not doing any installation. Cause after clicking Next button in less than 1 second I get the above mentioned information. After clicking Finish I get popup window which I attached to my message.


Attached Images
 
My System SpecsSystem Spec
07 Sep 2012   #7

Windows 7 Ultimate x86
 
 

After your recommendation I tried to run installation .exe file in Compatability Mode also. The only difference was that I didn't receive popup window.
My System SpecsSystem Spec
07 Sep 2012   #8

Windows 7 Ultimate x86
 
 

As you see from first picture Windows stops my webcam. How to disallow Windows to do it?
My System SpecsSystem Spec
07 Sep 2012   #9
Microsoft MVP

Windows 8.1 Pro with Media Center 64 bit
 
 

Code 43 is a driver problem. If it's just the one USB device, then its likely the driver for that device that has the problem. If its multiple USB devices then its likely the USB driver that is having issues. One thing you can try is to open device manager and go to the Universal Serial Bus Controllers section and Uninstall everything listed. Then reboot and windows will redetect them and reinstall them.
My System SpecsSystem Spec
07 Sep 2012   #10

Windows 7 Ultimate x86
 
 

I removed all USB devices from Device Manager and restarted laptop. After it it found and installed all devices normally.

There is one more thing to which I payed attention that when I move laptop for example get it from table Windows stops my webcam from Device Manager. The same thing happens when I move a bit the cover of laptop. As I understood my laptop has also hardware problems. What you think?

For example now after successfull installation of all drivers I moved a bit the cover of laptop and Windows stopped webcam again. Now it is the same in Device Manager. If I don't touch laptop, camera works within 4-5 minutes and after that windows stops it.
My System SpecsSystem Spec
Reply

 This device can perform faster




Thread Tools



Similar help and support threads for2: This device can perform faster
Thread Forum
Solved This Device Can Perform Faster Drivers
USB 2.0 device(printer) can perform qicker in usb 2.0 port Hardware & Devices
Solved This device can perform faster Hardware & Devices
This device can perform faster Hardware & Devices
your usb composite device can perform faster General Discussion
"This device can perform faster" Hardware & Devices
USB - annoying "Device Can Perform Faster" message Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

İ Designer Media Ltd

All times are GMT -5. The time now is 05:55 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33