Usb copy slow after ram upgrade

I have a dell dimension 9200 which copy very very slow from internal drives to usb after upgrading the ram from 1GB to 3GB. I have tried changing the rams, installing fresh windows 7, and all I could but the problem seems not be solved. the worse part of it is that as much as it copies slow, it's not continues copying. It copy and then stops then it will continue again and stop repeatedly until the copy ends. When it starts copying, it starts at 10MB/sec then gradually drops to 3MB/sec. This speed rate gradual reduction happens to only flash drives and micro chips but as for the occasional stopping ithappens even if I'm copying between internal drives but for the internal drives the speed is between 25MB/sec to 51MB/sec. The problem is that it wasn't copying like that before I purchase the 2GB ram. Please any help.

Priceless said:

I have a dell dimension 9200 which copy very very slow from internal drives to usb after upgrading the ram from 1GB to 3GB. I have tried changing the rams, installing fresh windows 7, and all I could but the problem seems not be solved. the worse part of it is that as much as it copies slow, it's not continues copying. It copy and then stops then it will continue again and stop repeatedly until the copy ends. When it starts copying, it starts at 10MB/sec then gradually drops to 3MB/sec. This speed rate gradual reduction happens to only flash drives and micro chips but as for the occasional stopping ithappens even if I'm copying between internal drives but for the internal drives the speed is between 25MB/sec to 51MB/sec. The problem is that it wasn't copying like that before I purchase the 2GB ram. Please any help.

You could try running a memory test to check for ram issues;

https://www.sevenforums.com/tutorials/715-memory-diagnostics-tool.html

Sir Goerge, I tried running the memory test and there was no error found. And Mr. Ztruker, as for the teraCopy, I didn't see any changes in the transfer speed rate. Mr Layback, if I may ask, can improper ram in a wrong position be detected in system bios and also allow the system to run? Before I purchase the 2GB ram and installed it in the computer, my fifa 12 use running slow unless I increase the USER ACCELERATION AND SPEED but now I play without increasing anything. Shouldn't this justify that the ram is proper and is in the right position?

use speccy or cpu id to give us some system specs, how many dimm (memory) slots do u have, i assume you had 1gb in one slot and added a further 2gb in the other. in that case your motherboard may not be compaitable with diffrent sized modules and only works if the modules are the same size, i.e. 2x1,2x2,2x4. not 1x1 and 1x2 together

As for the memory test I have done and there was no error found. I also change the ram I bought first and even went ahead to install new windows 7 on my system but the problem still exist because at first I thought it was the new ram so I decided to change it.

THIS IS MY COMPUTER SPECS I GOT FROM SPECCY
CPU
*Intel Core 2 Duo E6600
Cores = 2
Threads = 2
Name = Intel Core 2 Duo E6600
Code Name = Conroe
Package = Socket 775 LGA
Technology = 65nm
Specification = Intel Core2 CPU 6600 @ 2.40GHz
Family = 6
Extended Family = 6
Model = F
Extended Model = F
Stepping = 6
Revision = B2
Instructions MMX, SSE, SSE2, SSE3, SSSE3, Intel 64
Virtualization = Supported, Disabled
Hyperthreading = Not supported
Bus Speed = 266.0 MHz
Rated Bus Speed = 1064.0 MHz
Stock Core Speed = 2400 MHz
Stock Bus Speed = 266 MHz
Average Temperature = 36 °C
Caches
-L1 Data Cache Size = 2 x 32KBytes
-L1 Instructions Cache Size =2 x 32 Kbytes
-L2 Unified Cache Size = 4096K Bytes
RAM
*Memory slots
Total memory slots = 4
Used memory slots = 2
Free memory slots = 2
*Memory
Type = DDR2
Size = 3072 MBytes
*Physical Memory
Memory Usage 28 %
Total Physical 3.00 GB
Available Physical 2.13 GB
Total Virtual 5.99 GB
Available Virtual 5.04 GB
*SPD
Number Of SPD Modules 2
· Slot #1
Type DDR2
Size 2048 MBytes
Manufacturer Elpida
Max Bandwidth PC2-6400 (400 MHz)
Part Number EBE21UE8AFFA-8G-F
Serial Number 1A3610F5
Week/year 27 / 09
SPD Ext. EPP
· Slot #2
Type DDR2
Size 1024 MBytes
Manufacturer Kingston
Max Bandwidth PC2-4300 (266 MHz)
Serial Number 672EF7BB
Week/year 33 / 06
SPD Ext. EPP
Motherboard
Manufacturer Dell Inc.
Model 0WG855 (Microprocessor)
Chipset Vendor = Intel
Chipset Model =P965/G965
Chipset Revision = C1
Southbridge Vendor = Intel
Southbridge Model = 82801HH (ICH8DH)
Southbridge Revision B0
· BIOS
Brand = Dell Inc.
Version = 2.5.3
Date 11/22/2007
· PCI Data
-Slot UNKNOWN
Slot Type = UNKNOWN
Slot Usage = In Use
Bus Width = Unknown
Slot Designation = PEG
Slot Number = 0
-Slot UNKNOWN
Slot Type = UNKNOWN
Slot Usage = Available
Bus Width = Unknown
Slot Designation = SLOT1
Slot Number = 1
-Slot UNKNOWN
Slot Type = UNKNOWN
Slot Usage = Available
Bus Width = Unknown
Slot Designation = SLOT3
Slot Number = 2
-Slot UNKNOWN
Slot Type = UNKNOWN
Slot Usage = Available
Bus Width = 32 bit
Slot Designation = SLOT4
Slot Number = 3
-Slot UNKNOWN
Slot Type = UNKNOWN
Slot Usage = Available
Bus Width = 32 bit
Slot Designation = SLOT5
Slot Number = 4
-Slot UNKNOWN
Slot Type = UNKNOWN
Slot Usage = Available
Bus Width = 32 bit
Slot Designation = SLOT6
Slot Number = 5

Please if there is anything that I forgot to include but it will be important, please let me know so that I can go back to speccy and deliver you that particular information.