Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: sfc /scannow can't complete

16 Nov 2012   #1
chewyboy000

Windows 7 Ultimate x64
 
 
sfc /scannow can't complete

when ever I run sfc /scannow or sfc /scanfile=c:\Windows\System32\winload.exe it says Windows Resource Protection could not perform the requested operation. Please help.


My System SpecsSystem Spec
.
16 Nov 2012   #2
kellymac35

WINDOWS 7 Ultimate x64 Full
 
 

Have you tried running sfc/scannow in safe mode? Restart your NB and immediately tap f8 to enter safe mode run cmd as systems admin.
My System SpecsSystem Spec
17 Nov 2012   #3
chewyboy000

Windows 7 Ultimate x64
 
 

all ready tried...
My System SpecsSystem Spec
.

17 Nov 2012   #4
EpicLuigi1134

Window 7 Ultimate x64
 
 

Have you tried to get a recovery disk or a system repair disk? Cause you can go to cmd then try it.
My System SpecsSystem Spec
18 Nov 2012   #5
chewyboy000

Windows 7 Ultimate x64
 
 

If I go and run the command sfc /scanfile=c:\Windows\System32\winload.exe which means it scans winload.exe it says "Windows Resource Protection could not perform the requested operation". So it must be that this file -> c:\Windows\System32\winload.exe must have something wrong with it. Please help as I really need this command to work. Question: If I DO use the recovery disk will it have the file c:\Windows\System32\winload.exe so it can replace it?
My System SpecsSystem Spec
19 Nov 2012   #6
gregrocker

 

SFC -SCANNOW Run in Command Prompt at Boot

I would run it from DVD System Recovery Options
or System Repair Disk

If it fails to run again when certain you're typing Commands precisely, then run a Repair Install
My System SpecsSystem Spec
Reply

 sfc /scannow can't complete




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
SFC /scannow won't complete ... tried everything except a hammer
SFC /scannow won't complete and gets stuck at 58%. Same results when booting up in Safe Mode. Tried running an error check on boot by right clicking C*drive / properties/ tools/ check for errors and then re-ran SFC. Checked all the services options and they are OK. Checked the CBS log which...
Performance & Maintenance
sfc scannow errors, chkdsk taking forever to complete
Hi, My system fell down twice within two days (fri and saturday), makes me wonder what is happening ! On the second fall, the system started having booting issues which i managed to resolve. Thereafter, it started hanging and programs were not responding to commands. Tried running sfc scannow...
BSOD Help and Support
iTunes Complete & Page Load Complete
On my HP laptop, the "Complete" sound plays after a CD burn, import or app update is complete. The "Page Load Complete" sound plays after download of an app and at various other time I can't recall off the top of my head. Some people find these sounds annoying and disable them. I, however, like...
Software
sfc / scannow
I am getting bluescreen and have been reading some threads about this. 1. verifier.exe is not working in that sence that it willnot run and I have to step back to system restoire point. 2. Running "Who crashed" gives some clue. 3. Running sfc / scannow gave the message in prompt that not all...
BSOD Help and Support
sfc /scannow
Hi sfc /scannow won't work and keeps coming up saying that another system repair is scheduled upon reboot. Only problem is i reboot and get the error that i have a corrupt system registry so it wont run what is scheduled. I need sfc /scannow to fix my problem. Any ideas of how to get...
BSOD Help and Support
sfc/scannow
SFC/scanow reported integrity violations that could not be repaired... Cannot repair member file "iassdo.dll.mui" of Microsoft-Windows-Networking-Internet_Authentication_Service_Iassdo.Resources, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = "en-US", VersionScope...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:11.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App