Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Intermintent Program Not Responding Issues

20 Nov 2012   #1
RRainwat

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 
Intermintent Program Not Responding Issues

I to am having the "not responding" problem. I get it intermintently in every program I run. I Have a I recently upgraded my MB, CPU, PSU, Memory etc. This what i am seeing in Event Viewer.

EVENT 510, ESENT

Windows (2700) Windows: A request to write to the file "C:\ProgramData\Microsoft\Search\Data\Applications\Windows\Windows.edb" at offset 137428992 (0x0000000008310000) for 32768 (0x00008000) bytes succeeded, but took an abnormally long time (60 seconds) to be serviced by the OS. In addition, 6 other I/O requests to this file have also taken an abnormally long time to be serviced since the last message regarding this problem was posted 966 seconds ago. This problem is likely due to faulty hardware. Please contact your hardware vendor for further assistance diagnosing the problem.

Anyone have any suggestions?


My System SpecsSystem Spec
.
20 Nov 2012   #2
Indianatone

Windows 7 x64 Ultimate and numerous virtual machines
 
 

Hi RRainwat,
So you get issues with every program you run? I wonder if you have a hard drive issue. This could be causing your sluggish "not responding issues".
Download the free trial of this program and report back on the health of you drive(s).
Hard Disk Sentinel - HDD health and temperature monitoring
Good Luck,
Tony.
My System SpecsSystem Spec
22 Nov 2012   #3
RRainwat

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I D/L'd the program and it is saying that my performance is at 97% and health is at 100%.
My System SpecsSystem Spec
.

22 Nov 2012   #4
Indianatone

Windows 7 x64 Ultimate and numerous virtual machines
 
 

Quote   Quote: Originally Posted by RRainwat View Post
I D/L'd the program and it is saying that my performance is at 97% and health is at 100%.
That rules out the hard drive. What are your CPU and system temps ?
CPUID - System & hardware benchmark, monitoring, reporting

Post back the results, an overheating cpu can cause this.
My System SpecsSystem Spec
22 Nov 2012   #5
RRainwat

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Core Temps fluctuating between 75 & 95 F (24-35 C)
Hardware monitor ACPI
Temperature 0 28C (82F)
Temperature 1 30C (85F)
Hardware monitor NVIDIA NVAPI
Voltage 0 1.20 Volts
Temperature 0 53C (127F)

------------------------------------------------------------------------
Hardware monitor Fintek F718xx
Voltage 0 3.33 Volts [0xD0] (+3.3V)
Voltage 1 1.01 Volts [0x7E] (CPU VCORE)
Voltage 2 0.05 Volts [0x3] (VIN2)
Voltage 3 1.41 Volts [0x78] (VIN3)
Voltage 4 5.80 Volts [0x8A] (+5V)
Voltage 5 8.27 Volts [0x5E] (+12V)
Voltage 6 2.10 Volts [0x83] (VIN6)
Voltage 7 3.33 Volts [0xD0] (VSB3V)
Voltage 8 3.26 Volts [0xCC] (VBAT)
Temperature 0 56C (132F) [0x38] (TMPIN0)
Temperature 1 32C (89F) [0x20] (TMPIN1)
Temperature 2 34C (93F) [0x22] (TMPIN2)
Fan 0 1951 RPM [0x301] (FANIN0)
Fan 1 1203 RPM [0x4DF] (FANIN1)
Fan PWM 0 100 pc [0xFF] (CPU)
Fan PWM 1 65 pc [0xA6] (System Fan 1)
Fan PWM 2 65 pc [0xA6] (System Fan 2)
My System SpecsSystem Spec
22 Nov 2012   #6
Indianatone

Windows 7 x64 Ultimate and numerous virtual machines
 
 

Voltage 5 8.27 Volts [0x5E] (+12V). This reading if it is to be believed is low, the 12 volt supply is only 8.27 volts.
This is either a bad power supply or an error in reading voltages.
If the 12V rail was low it would cause issues with hard drives and cd dvd drives. You may want to measure the voltages with a DC volt meter on a spare hard drive connector and verify you have 12 and 5 volts. Yellow is 12v Red 5v (sata only Orange 3.3v). Try another power supply.
You could enter the bios and under the hardware tab check the voltages there, if the 12volts is around 12V +- 5%
Then everything is OK voltage wise and it is just a read error in the software.
If not then I suspect you may have a virus or malware infection rather than hardware.
My System SpecsSystem Spec
Reply

 Intermintent Program Not Responding Issues




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
the program has stopped responding
Hi All. I got a little problem with my win 7 desktop. For about 2 week now I got 3 BSODs and several times a day I get the program has stopped responding messages. Sometimes it comes back, sometimes I hit the reset button to get it back. When I hit the reset button, windows tells me that the...
General Discussion
Program Stopped responding
I recently found i have a window i cant ALT Tab to...its a bunch of numbers about 60-70 of them. It only comes up when i boot. If i leave the computer on for about 10+ Hours it finally stops responding. My brothers laptop had 15 or 20 of these on his desktop i cant necessarily search for it cause...
General Discussion
Processor usage is nil but still the program goes in not responding
Hi frnz I m not new to this forum but i m not a regular visitor. I have amd phenom processor dual core with 4 gb ram n two hdd 1 for 120 and other for 160. I have win 7 ultimate installed. Recently I am facing the problem is that while I use IE8 it goes to not responding mode for some seconds...
Performance & Maintenance
Can't save as - program stops responding
I see my original thread was marked as solved. The issue was solved for a couple of hours. Now it seems I can save images to my external hard drive BUT The program stops responding Then it responds then it saves it It takes 2 minutes before anything can be saved Right now I am waiting on...
General Discussion
program Not responding
hello, not sure if this is the right thread, but here goes, i recently purchased an upgrade new motherboard, new CPU, memory and Windows 7 installed, unfortunately it hasn't been a smooth purchase, i have connected a N Belkin Adaptor and logitech wireless keyboard and mouse but computer keeps...
BSOD Help and Support
Program is not responding
So I'm running Win7 Ultimate 64bit, and while running Photoshop CS5 i keep interrupted with the top window-bar coming onto photoshop with a message saying the program is unresponsive. I will be in the middle of selecting something to delete with content aware fill, and the top bar will show up and...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:52.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App