Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Memory Question

27 Sep 2009   #11
Criminal Fetus

Windows 7 7600RTM X64

Yeah i looked into that board and they say its best to pair side by side the duplicates for best results.
NVIDIA Forums > XFX 680i SLI ....URGENT Help needed! Basically same scenario

My System SpecsSystem Spec
27 Sep 2009   #12

Windows 7 64bit

thanks for help guys
My System SpecsSystem Spec
28 Sep 2009   #13

Win7 Build 7600 x86

Dual channel is different with every board manufacturer.

On some boards you have to put two sticks in the same color to have dual channel.
On other's you have to put them in the different colors.

Check the manual when in doubt.

My System SpecsSystem Spec

29 Sep 2009   #14

Windows 7 Ult, Windows 8.1 Pro,

You should only be running the 2X2GB sticks in slots 2 and 4 because they get the info from the CPU first. You should not be mixing Ram sets, it's never a good idea and usually will cause HDD corruption or just general instablity. The 680i has it's dimm slot colors alternating so use the same colored slots for your Ram. Use the Black slots only for 2X2GB. Do not pair them side by side as someone suggested, that is incorrect.

My memory score is 7.5 running 2X2GB of GSkill pc2 9600 at 1200MHz.
My System SpecsSystem Spec
29 Sep 2009   #15

Windows 7 64bit RTM

My Memory Score is pegged at 7.9 with a transfer rate of a little over 25k MB/s I'm not sure how fast you need to be to peg out at 7.9, probably around 10k somewhere. Those numbers are kind of wierd anyway. I just use the built in command prompt ":\winsat mem" to fine tune my memory.

What is the current Mhz of your memory right now? I know when I had my quad core running at 3Ghz and DDR2 800 4-4-4-12 memory, my speed was only around 5k MB/s so you aren't too far off.

What is your CPU speed and Memory Speed? I see the latency is 5's compared to my 4's. and memory usually doesn't run at 800 Mhz by default, uaully it is 667. So if you are running 667, latency 5's then most likely your MB/s is correct.
My System SpecsSystem Spec

 Memory Question

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
Memory Question
If you have a CPU that runs at 2 GHz this is 2,000 MHz. And this means it will take in an Process Data 2,000 Million Times Per SEC. Now when you Buy Memory they come in all different Speeds up to 1333 MHz. Now if my DDR2 memory says 1333 MHz this is because it is telling me the Dable Data...
Hardware & Devices
Memory question?
I have to make a choice. 8GB memory and no built in camera, or 4GB and a built in camera for the same price. I7 2.7 processor with W7 Pro 64 bit. Opinions please.
Hardware & Devices
Memory ram question
I have installed in my motherboard GIGABYTE - Motherboard - Socket 775 - GA-X38-DS4 (rev. 1.0) the Kingston hyperx 2x2GB,in dual channel,2GB in yellow slot 1 + 2GB in yellow slot 3 (KHX6400D2B1K2/4G 4GB kit DDR2 800MHz Non-ECC (kit of 2 - 2GB) CL5-5-5-15 1.8V) Kingston Technology...
Hardware & Devices
Memory question
does anyone know a good simple way to find out what is taking up so much memory that i dont need and can stop, or somehow make use less memory? i just start my computer its already using 3.4 gigs of ram
General Discussion
Memory Question
I have Windows 7 x32 installed and I have 4 gig of memory. How can I tell if I am using all four, or should I try to upgrade to 64-bit?
General Discussion
Memory question
Hi all, The pieces for new build are taking shape, all ready to receive my 64bit version of W7 in October (well it's all stacking up in the spare room), but stuck on the memory to go for. It's an i7 chip on this motherboard: GIGABYTE - Product - Motherboard - Overview - GA-EX58-UD5 (rev....
Performance & Maintenance

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:55.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App