Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Ran sfc /scannow, CBS log shows corrupted files - how to fix?

04 Jan 2013   #1
nr123

Windows 7 Home Premium 64bit
 
 
Ran sfc /scannow, CBS log shows corrupted files - how to fix?

Hello,

Could you please suggest how to fix the errors below in windows 7 home premium 64bit. Have done system restore, but the errors below are persistent, not fixed after running scannow multiple times. I have attached the sfcdetails.txt file as well. Thanks in advance.
........................................

1) CSI 000002fb [SR] Cannot verify component files for Microsoft-Windows-Convert, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral, manifest is damaged (TRUE)

2) CSI 000002fd [SR] Cannot repair member file [l:26{13}]"iediagcmd.exe" of Microsoft-Windows-IE-IEDiag, Version = 9.4.8112.16421, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch

3) CSI 000002ff [SR] Cannot repair member file [l:26{13}]"iediagcmd.exe" of Microsoft-Windows-IE-IEDiag, Version = 9.4.8112.16421, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch

4) CSI 00000183 [SR] Cannot repair member file [l:44{22}]"WMIMigrationPlugin.dll" of Microsoft-Windows-WMI-Core, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch

5) CSI 00000303 [SR] Could not reproject corrupted file [ml:520{260},l:88{44}]"\??\C:\Program Files (x86)\Internet Explorer"\[l:26{13}]"iediagcmd.exe"; source file in store is also corrupted




Attached Files
File Type: txt sfcdetails.txt (346.4 KB, 6 views)
My System SpecsSystem Spec
.
04 Jan 2013   #2
bassfisher6522

Windows 7 Ultimate 64 bit
 
 

Did you make the system recovery disc's? If so you can repair the system files using the recovery disc's.

System Repair Disc - Create

System Recovery Options
My System SpecsSystem Spec
04 Jan 2013   #3
Brink

64-bit Windows 10 Pro
 
 

Hello nr123, and welcome to Seven Forums.

Since this involves Internet Explorer files being corrupted in both Program Files and the source CAB file, you may need to do a repair install to fix them.
My System SpecsSystem Spec
.

04 Jan 2013   #4
nr123

Windows 7 Home Premium 64bit
 
 

I do have the Dell OS recovery and restore USB key. Would you recommend replacing individual corrupted files manually or just do a full re installation?

Blue screen errors include - memory exception, system exception, bad pool header and so on. Is reformatting hard drive necessary at this stage, since previous re installation gave "blue screen -free performance" for just couple of months?
My System SpecsSystem Spec
04 Jan 2013   #5
Brink

64-bit Windows 10 Pro
 
 

With those issues, it would be best to do a full factory recovery.

Restoring Your Computer´s Software to the Factory Settings - KB Article - 336966 | Dell
My System SpecsSystem Spec
04 Jan 2013   #6
whs
Microsoft MVP

Vista, Windows7, Mint Mate, Zorin, Windows 8
 
 

I would try a repair/install first. What can you lose.
My System SpecsSystem Spec
04 Jan 2013   #7
nr123

Windows 7 Home Premium 64bit
 
 

I can do all of that. Thanks. Bit of history - Restore to factory settings has been done twice (in last 9 months), but the same problems come back. What is the likely root cause? Have i bought a lemon? Hardware tests come out clean though.

Someone suggested I have a virus, which is not going away with the currently installed Symantec Norton Antivirus, so a hard drive reformat is necessary before a re install. Additional suggestion - Norton antivirus itself is causing all issues in OS 7 and i should get a different antivirus software.

Open to trying all and any solutions, hoping to get a permanent fix this time. Thanks all.
My System SpecsSystem Spec
04 Jan 2013   #8
whs
Microsoft MVP

Vista, Windows7, Mint Mate, Zorin, Windows 8
 
 

I doubt that Norton is the cause. I used Norton on several systems and never had a problem. But then you never know.
My System SpecsSystem Spec
04 Jan 2013   #9
mbluett

Windows 7 Home Premium 64-bit
 
 

I would also suggest doing some sort of HD diag on your disk as it is very unusual for files to become corrupted.

Check the S.M.A.R.T. data for your drive. If the Attribute Values or the Worst Values show as lower than the Threshold Value, your hard disk maybe questionable.

I use SIW to view the S.M.A.R.T. data.

As to diags, you could consider using "HD Tune", diags from your HD vendor, or "chkdsk /r".
My System SpecsSystem Spec
04 Jan 2013   #10
nr123

Windows 7 Home Premium 64bit
 
 

I did tthe repiar install and ran scannow - no corrupt files.

Ran SIW for SMART values for hard disk, results attached in a txt file.

Does this mean the hard disk is messed up???? I have been having issues with this laptop from day 1.


Attached Files
File Type: txt SIW SMART for Hard disk.txt (4.8 KB, 19 views)
My System SpecsSystem Spec
Reply

 Ran sfc /scannow, CBS log shows corrupted files - how to fix?




Thread Tools




Similar help and support threads
Thread Forum
How do you fix corrupted files found by SFC /SCANNOW?
I am using Windows 7 Professional Professional. About 2 weeks ago my machine started "not responding" when I would run my various software. It progressed to a severe condition and I would have to power down with the power button. I have run ESET NOD32 Anti-Virus 6 virus scans, Malware Bytes...
Performance & Maintenance
sfc/scannow Could not repair corrupted files; CBS.log not showing any
Hello, I am using Windows 8 (64-bit version) and have recently had a virus which I have quarantined and removed. After restarting my computer it seemed that Windows 8 was taking ages to boot around 3 minutes compared to it's usual half minute start up and login. Searching online I found that...
Performance & Maintenance
Scannow cannot repair corrupted files
Hello to everyone, I am new here & looking for help with a computer issue. Any help given is greatly appreciated. I'll start from the beginning. For awhile now but only very occasionally I am getting BSOD crashes & then the computer restarts. So today I decided to do some detective work & try to...
Performance & Maintenance
sfc /scannow cant solve corrupted files
sfc /scannow can't fix my corrupted files how can i solve it ? this is the error file as attach
General Discussion
SFC SCANNOW Found 2 Corrupted Files
SFC SCANNOW Found 2 Corrupted Files Aug 14, 2011 2011-08-14 17:46:35, Info CSI 000004f6 Could not reproject corrupted file "\??\C:\Windows\System32"\"tcpmon.ini"; source file in store is also corrupted 2011-08-14 18:02:22, Info CSI 00000814 Could not...
General Discussion
scannow reports corrupted files it can't fix
scannow reports corrupted files on Windows 7 enterprise 64bit, but cannot repair them. how do I restore corrupted system files? Corrupted files also reported by checkdsk: iertutil.dll, urlmon.dll and wmpps.dll. These files cannot be fixed by either checkdsk or scannow. System is...
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 07:19.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App