Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: How do I cut down on the pre boot screens

05 Jan 2013   #1
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 
How do I cut down on the pre boot screens

I have a Sandy Bridge which would boot much faster if it didn't show those details and lists of numbers etc before it gets to the Windows flag.

I have eliminated most of that in the Ivy Bridge with the new EUFI but this is the old Award software one and now I have had a look through but really don't see anything that makes real sense to me.

I have enabled quick boot the order is right but then I have lists of options ie the PCI ones that could for all I know get rid of those annoying posts.

Anyone point me in the right direction please?

The board is a Gigabyte GA-H67-UD2H-B3.


My System SpecsSystem Spec
.
06 Jan 2013   #2
centaur78

Windows 7 ultimate x64
 
 

Which is the exact model for the motherboard

GA-H67M-UD2H-B3 or GA-H67MA-UD2H-B3 and which revision ??
My System SpecsSystem Spec
06 Jan 2013   #3
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Quote   Quote: Originally Posted by centaur78 View Post
Which is the exact model for the motherboard

GA-H67M-UD2H-B3 or GA-H67MA-UD2H-B3 and which revision ??
Sorry mate it is GA-H67A-UD3H-B3.
My System SpecsSystem Spec
.

06 Jan 2013   #4
centaur78

Windows 7 ultimate x64
 
 

Since you have enabled the Bios Quick boot.. You can also enable the OS quick boot via Gigabyte's SMART 6 software as well as the SMART Quickboost to Turbo

Under "Init Display First" select Onboard or the appropriate PCI (if you have an graphics card) to use as the first display.

Under "Integrated Peripherals" > "Onboard H/W 1394" .. set it to Disabled if you dont use firewire.

These maynot make considerable speed boost... but might help.
My System SpecsSystem Spec
06 Jan 2013   #5
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Quote   Quote: Originally Posted by centaur78 View Post
Since you have enabled the Bios Quick boot.. You can also enable the OS quick boot via Gigabyte's SMART 6 software as well as the SMART Quickboost to Turbo
Just a general word of caution : these Gigabyte utilities have been know to cause BSOD's in the past, certainly on earlier Gigabyte models. Perhaps that has changed now, but I thought I might just mention it.

Regards,
Golden
My System SpecsSystem Spec
06 Jan 2013   #6
centaur78

Windows 7 ultimate x64
 
 

Quote   Quote: Originally Posted by Golden View Post
Quote   Quote: Originally Posted by centaur78 View Post
Since you have enabled the Bios Quick boot.. You can also enable the OS quick boot via Gigabyte's SMART 6 software as well as the SMART Quickboost to Turbo
Just a general word of caution : these Gigabyte utilities have been know to cause BSOD's in the past, certainly on earlier Gigabyte models. Perhaps that has changed now, but I thought I might just mention it.

Regards,
Golden
thanks golden... i know that.. I was in 2 minds about posting that here... but since ICit2lol is one of us.. he know's the problems associated with that and... well what are we here for !!
My System SpecsSystem Spec
06 Jan 2013   #7
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

No worries
My System SpecsSystem Spec
06 Jan 2013   #8
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Thanks fellas I maybe might just leave well enough alone until I get a few spare moments as I did have a few problems when I first built this machine with the BIOS stuff and some and I learnt my lesson real quick.
My System SpecsSystem Spec
Reply

 How do I cut down on the pre boot screens




Thread Tools




Similar help and support threads
Thread Forum
25 second boot up delay after post/AHCI screens
Hi, I've been offline for the last few days upgrading my system. I did this because of temp problems with my system, and it was time to get new hardware... Mine was two years old :D I bought a GA-P67A-UD3-B3 mobo, an i5-2500 and 2 x 4g CL9 XMP memory modules running at 1600mhz My temp...
Hardware & Devices
Collection Of Boot Screens Of All Windows Versions
http://fc09.deviantart.net/fs71/f/2010/131/8/6/New_Windows_Boot_Evolution_by_vinceranda.jpg
Chillout Room
Different Windows 7 Boot Screens due to Resolution?
Hi guys, I'm just curious about a little detail, is not something that bothers me, but I'm kind of curious. I have a little Gateway netbook, as you know, netbooks res. generally sucks. Well, this little guy can be included in that list. The point is that I get to receive a Windows Vista...
General Discussion
Win 7 and Mac Os X snow leopard dual boot on 2 screens
At the moment i have installed Win 7 ultimate x64 bit . I am planning to install also snow leopard on the same disk for dual boot . Is it possible to boot both Os at the same time and have them displayed in 2 monitors ( Win 7 in my main and Mac on 2nd)
Installation & Setup
Help needed with boot screens
hi all Just need a bit of advice here. I have installed 7 on my desktop. When i boot i get that new funky glowing logo. which is nice. Now, when i install it on my acer one netbook i get the old drab vista bar. Now would i be right in assuming that its something to do with the graphics card...
Graphic Cards


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:39.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App