Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Rampage Formula 3 - Ahci 6GBPS

14 Mar 2013   #1
p1tcho0

Windows 7 64 BIT
 
 
Rampage Formula 3 - Ahci 6GBPS

Hi, i read some forum and I have seen about Marvell 9128 Controller doesnt handle 6GBs correctly.
I did some test and reach 222mbs rather 600....

To resume my case
Bios= Controller SATA_6GB = AHCI
SSD = Freshed bought with an updated firmware ( agility 4 250gb)
=============================================================================
Driver installed for the present setup and my ssd is used as secondary drive
PS:No bsod all are stable but the speed isnt very well

Im not sure how to handle the trouble if people doesnt know what i am saying i can do print screen but for the moment I am at my job and I already help customer for ISP providing


My System SpecsSystem Spec
.
14 Mar 2013   #2
p1tcho0

Windows 7 64 BIT
 
 

There is an issue showed in the link

Marvell 9128 Controller 6 Gb/s SATA - Drivers - Windows 8
My System SpecsSystem Spec
Reply

 Rampage Formula 3 - Ahci 6GBPS




Thread Tools




Similar help and support threads
Thread Forum
cloned C:, installed AHCI drivers, changed BIOS to AHCI, D:'s GPT gone
see second post. I have a 3TB drive D: for data formatted with GPT. Had BIOS OnChip SATA Type set as "RAID" "As SATA Type" from back in the day. When I took out the RAID, I forgot to change this to AHCI when I reformatted and got rid of RAID drives! Changing to "AHCI" "As SATA Type" as...
Installation & Setup
No AHCI option in BIOS, is my computer default in AHCI or IDE?
I bought a brand new SSD, installed it in Windows 7, and there is no option in my BIOS for the SATA controller (to switch between IDE and AHCI Mode). How do I determine whether my computer's sata controller is using IDE or AHCI? I want to make sure that my AHCI controller is enabled and not IDE...
Hardware & Devices
Rampage IV Black?
Will the Rampage 4 Black Edition have new features that are on the VI boards?
PC Custom Builds and Overclocking
Marvell Rolls Out New SATA 6Gbps Controller for SSDs
Read more at: http://www.maximumpc.com/article/news/marvell_rolls_out_new_sata_6gbps_controller_ssds
News
Formula 1 '97
Hello, i'm a new user. :) I correctly manage to install this old game (F1 '97) in my computer which is running Windows 7 Home Premium x64. I can even play with it but after a race the screen goes black and it crash. I found this message on Event Viewer... I'm from Italy so sorry if the...
Gaming
Intel Sata controler ICH10R AHCI + Jmicron AHCI error
Hi. I have the GA-EX58-Extreme Board and have just installed the pre release of Win7 7600 64 bit. Normally i have experience to get the BSOD when in staling with AHCI active in bios so i change to IDE mode. Installation went flawless and also the change to AHCI mode on Intel ICH10R controler...
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:39.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App