Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Terrible HDD Performance in Windows 7, help


10 Oct 2009   #1

Windows 7
 
 
Terrible HDD Performance in Windows 7, help

Windows 7 Disk performance is Horrible.

My system:
Windows: Windows 7 Professional x64 (6.1 Build 7600) (Obtained from Microsoft MSDN Academic Alliance)
Processor: Core 2 Duo e7400
Ram: 4GB DDR2
Mobo: Gigabyte P31-DS3L
Graphics: Asus 9800GT 512 MB

Prior to installing i moved all my files around on my Sata disk (averaging about 40-50 mb/sec in XP according to windows copy) After the install of Windows 7 I copied files back to their locations on my system drive (Average was 15 mb/sec according to windows, what the hell?)

Also I'm having issues that while copying i wasn't able to stream video via my smb share without it being choppy, and also if uysing any web browser while doing disc intensive actions the browser would go into "Not responding" mode.

This is further illustrated by that when I work in Adobe After Effects, if i move the timeline slider to fast (disc access intensive) the program will instantly go into Not responding mode and I'll have to restart it.

I've tried to fix this with several methods, among them turning off write cache buffer flushing on the drives (did bring the resource drain down a bit, but didn't help for speed or non responsiveness)

This is really a shame since I've been looking forward to using Windows 7 since the RC ran very well. unfortunately since Windows 7 is unable to run disk intensive applications such as video editing it looks like I'm going to be forced to move back to Windows XP =(

Anyone know a sollution?

My System SpecsSystem Spec
.

10 Oct 2009   #2

Win 8 Release candidate 8400
 
 

davest

what size is your pagefile and is it set or managed by system?

Ken
My System SpecsSystem Spec
11 Oct 2009   #3

Windows 7
 
 

Hi it's currently at 4096 mb which matches my RAM ammount, and Windows manages it.
My System SpecsSystem Spec
.


11 Oct 2009   #4

 

Check your chipset driver for an udate.
My System SpecsSystem Spec
11 Oct 2009   #5

W7 X-64 RTM,SUSE 11.1, XP PRO SP3 as a VM, VMware ESXi
 
 

Hi there

What's the HDD spec.

If its IDE 5200 with a very small / non existent cache move your OS off this immediately. Just use this for backups / archives.

Get a decent SATA disk with tha largest cache you can afford -- minimum 7200 RPM. (If you can affford it SCSI or SSD is usually the best for performance but these rae more expensive).

Set your Bios to use SATA as well (enable AHCI) instead of IDE. - You'll need to "repair" or re-install Windows if you change this setting BTW.

A lot of Bioses have IDE set as default. Yours probably will as well if you upgraded from Windows XP as a normal Windows XP installation doesn't have SATA drivers included. You have to "Slipstream" these into a windows XP install disk.

Cheers
jimbo
My System SpecsSystem Spec
12 Oct 2009   #6

Windows 7
 
 

I'm using the 1016 Drivers from Intel, downloaded 3 days ago so they are up to date.


The Disks are:

System: Western Digital Green 1 TB (3 Months old) 16 MB Cache SATA2
Extra: Western Digital Blue 500GB (8 Days old) 16 MB Cache SATA2

P31-DS3L Uses the Intel ICH7 SB and thus does not have ACHI so I'm using the Enhanced mode as has been suggested.


In Linux and OSX which i have installed on the computer there are no multitasking problems and the disk transfer speeds are much higher. So I'd say that this is a windows problem more than a hardware problem.
My System SpecsSystem Spec
15 Oct 2009   #7

Windows 7 x64
 
 

I just built a new system with 7100RC--Asus p7p55d Pro, i7 860, 8 gigs, 260GTX and a WD 500 Sata 3G Caviar Black, 32m cache.

I have tried both x86 and x64, basic Win 7 chipset drivers and Intel chipset drivers, used IDE and ACHI and the highest this drive will get is 5.9. The rest of the system shows 7.3. to 7.5

I am not running a RAID, so as the original poster, was wondering why the performance showed as so bad. What is everyone else getting for their hard drives?

It seems I had an older drive connected for a while (not in this current install) which was 1.5 GB/s and it also showed 5.9

Is there a chance something in Windows 7 is looking at something different? The system does seem to operate normally, I see no performance problems except the assessment score.
My System SpecsSystem Spec
15 Oct 2009   #8

 

5.9 is the maximum WEI score for a non-SSD drive.

It is just a predictor of component performance within Windows 7, not a measure of performance.
My System SpecsSystem Spec
Reply

 Terrible HDD Performance in Windows 7, help




Thread Tools



Similar help and support threads for2: Terrible HDD Performance in Windows 7, help
Thread Forum
New Rig, And Terrible Sound Sound & Audio
Terrible wireless performance Network & Sharing
Never was a fan...But this looks terrible! Chillout Room
Music lagging terrible windows 7 Sound & Audio
Help. Geforce 9600 GT Win7 = terrible performance. Graphic Cards
Terrible performance on video playback Performance & Maintenance
7057 64 bit terrible wireless network performance Network & Sharing

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 01:35 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33