Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Running sfc /scannow find TONS of errors it can't fix.

05 Apr 2013   #11
Brink

64-bit Windows 10 Pro
 
 

It's showing the same files from IE being corrupted and repaired as before.

Since you do not use IE, then I wouldn't worry about it.


Code:
CSI    0000032e [SR] Repairing 5 components
2013-04-05 16:38:00, Info                  CSI    0000032f [SR] Beginning Verify and Repair transaction
2013-04-05 16:38:00, Info                  CSI    00000331 [SR] Repairing corrupted file [ml:520{260},l:88{44}]"\??\C:\Program Files (x86)\Internet Explorer"\[l:14{7}]"pdm.dll" from store
2013-04-05 16:38:00, Info                  CSI    00000333 [SR] Repairing corrupted file [ml:520{260},l:88{44}]"\??\C:\Program Files (x86)\Internet Explorer"\[l:20{10}]"msdbg2.dll" from store
2013-04-05 16:38:00, Info                  CSI    00000337 [SR] Repairing corrupted file [ml:520{260},l:76{38}]"\??\C:\Program Files\Internet Explorer"\[l:14{7}]"pdm.dll" from store
2013-04-05 16:38:00, Info                  CSI    00000339 [SR] Repairing corrupted file [ml:520{260},l:76{38}]"\??\C:\Program Files\Internet Explorer"\[l:20{10}]"msdbg2.dll" from store
2013-04-05 16:38:00, Info                  CSI    0000033d [SR] Repairing corrupted file [ml:48{24},l:46{23}]"\??\C:\Windows\SysWOW64"\[l:22{11}]"iesetup.dll" from store
2013-04-05 16:38:00, Info                  CSI    0000033f [SR] Repairing corrupted file [ml:48{24},l:46{23}]"\??\C:\Windows\SysWOW64"\[l:22{11}]"ieuinit.inf" from store
2013-04-05 16:38:00, Info                  CSI    00000341 [SR] Repairing corrupted file [ml:48{24},l:46{23}]"\??\C:\Windows\SysWOW64"\[l:24{12}]"iernonce.dll" from store
2013-04-05 16:38:00, Info                  CSI    00000346 [SR] Repairing corrupted file [ml:60{30},l:58{29}]"\??\C:\Windows\SysWOW64\en-US"\[l:32{16}]"iernonce.dll.mui" from store
2013-04-05 16:38:00, Info                  CSI    00000348 [SR] Repairing corrupted file [ml:60{30},l:58{29}]"\??\C:\Windows\SysWOW64\en-US"\[l:30{15}]"iesetup.dll.mui" from store
2013-04-05 16:38:00, Info                  CSI    0000034c [SR] Repair complete
2013-04-05 16:38:00, Info                  CSI    0000034d [SR] Committing transaction
2013-04-05 16:38:01, Info                  CSI    00000351 [SR] Verify and Repair Transaction completed. All files and registry keys listed in this transaction  have been successfully repaired



My System SpecsSystem Spec
.
05 Apr 2013   #12
brad1138

Windows 7 Ultimate x64
 
 

Thanks
My System SpecsSystem Spec
05 Apr 2013   #13
Brink

64-bit Windows 10 Pro
 
 

You're welcome.
My System SpecsSystem Spec
.

Reply

 Running sfc /scannow find TONS of errors it can't fix.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
SFC /Scannow Cannot Repair Errors
Being new to this forum, excuse any incorrect requests... Anyway, I have a Lenovo PC that started having very long boot up time (greater than 12 minutes). Have checked everything possible, no Malware found, viruses, Trojans and so on. Tried all that I know to try and fix problem with no luck...
Performance & Maintenance
SFC/Scannow errors
I'm having trouble installing Windows 7 Service Pack 1 KB976932, after downloading the update on reboot it says updated failed and reverts changes. I ran a SFC/Scannow command and the following two errors came up as un-fixable. 2013-10-04 23:16:21, Info CSI 0000003d ...
Performance & Maintenance
SFC /SCANNOW Errors + Unable To Fix
Recently I been getting BSODs here and there. Some of the errors were dxgmms1.sys and the latest one was memory management. I ran sfc /scannow from cmd (I did right click and select run as admin) and it found some errors and said it was unable to fix them. I ran sfc 3-4 times and it still couldn't...
Performance & Maintenance
Did sfc /scannow have errors.
So I did the sfc /scannow on my wifes puter. Got to 2% and had errors the scan stopped and that the errors could not be fixed. I looked at the log and am not sure what this means. I am using Windows 7 home premium. Thanks for any help.
Performance & Maintenance
multiple errors in CBS.log after running sfc /scannow ?
Widnows7 Pro 32bit: Ran sfc /scannow and tried to look at log but am completely lost ! Do know tho that the log contains the word "failed" 707 times ?? Any advice on what step 2 should be after this many "failed's"...or is this normal ? Thanks...TRinAZ
Performance & Maintenance
TONS of DistributedCOM errors
I noticed in my Event Viewer that I have literally THOUSANDS of errors with source listed as DistributedCOM and event ID 10016. It logs an error event about 4 times per minute on this. General info tab says: "The application-specific permission settings do not grant Local Activation permission...
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:42.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App