Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Attribute ReadOnly won't reset. Defaut set to blocked out/part check'd

30 Apr 2013   #1
Daisuke9

Windows 7 Ultimate x64
 
 
Attribute ReadOnly won't reset. Defaut set to blocked out/part check'd

Whenever a new folder is made regardless of which partition or drive its made in. If its the top folder or a sub folder. Even if the folder is emtpy. If theres files in the folder and none of them have this attribute. Lastly there is no hidden system files etc.. The box for the attribute read only is blocked out. Not checked. In quotes next to the box it reads(Only applys to files in folder). Im sure your aware that a blocked out box means not all files within this folder have this attribute status.

The issue i have with the Read Only attribute is that Im unable to unblockout/uncheck the attribute and i have run out of ideas to try that will reset the attribute so the box is unchecked and unblocked out.

What needs to happen that will get it to reset so there is nothing in the box
Thanks fort he Help
Daisuke

p.s. apolodies for typos an sentance structure. its lat im really tired and i lost to my desktop om this issue so far. LoL


My System SpecsSystem Spec
.
30 Apr 2013   #2
pbcopter

Windows 7 Ultimate x64 SP1, Windows 8.1 Pro x64, Windows 10 Pro x64
 
 

Having that box "blocked out" is normal for Windows 7.
It has no impact on a folder.

Read-only File and Folder Attribute
My System SpecsSystem Spec
30 Apr 2013   #3
logicearth

Windows 10 Pro (x64)
 
 

The check box is always like that in folder properties. It does not mean some of the files in the folder are readonly, Windows does not check the files in the folder for readonly status. That checkbox is not a indicator of readonly status on files within a folder.
My System SpecsSystem Spec
.

30 Apr 2013   #4
Daisuke9

Windows 7 Ultimate x64
 
 

Well thats good to know. Its been that way longer then i know obviously. It popped out at me one days couple weeks back and and not much attention was given to it until now. Thank you for a quick response and having good news. The attribute is functioning just fine. "If its not broke then don't fix it." a simple rule of thumb to live by.
Thanks again
Daisuke
My System SpecsSystem Spec
Reply

 Attribute ReadOnly won't reset. Defaut set to blocked out/part check'd




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Check Disk - Reset
How to Reset Check Disk to Not Run at Startup This will show you how to reset Check Disk or chkdsk back to it's default state of not running at the next startup. This can be handy if you had scheduled disk check to run on the next startup and changed your mind, or Check Disk will not stop...
Tutorials
BSOD Still crashes after a factory reset. Attempt to reset the display
BSOD Still crashes after a factory reset. Attempt to reset the display driver and recover from timeout failed. I thought a clean factory reset will fix the issue. But it is still has the BSOD. I have uploaded the zip file that contains the dump as instructed.
BSOD Help and Support
Tons of files missing, desktop reset, browsers and toolbars reset...
Hello everyone, I'm kind of freaking out right now. I turned my computer off about 12 hours ago, and now that I turned it on again it took much longer than usual for it to prepare the desktop. When I got in, there are about 50 % of my desktop icons missing, the programs I had attached to the...
General Discussion
System Part and Boot Part Diff Drives. Want to Align SYS and BOOT
Alright here is my issue as best as I can explain it. I have two drives, one with a system partition one with my boot. The one with the boot is the drive I want to use as my primary. I want to format the drive with the system partition. How can I move the sys partition to the boot drive so that...
Installation & Setup
File Attribute 'Archive' Bits not being reset
Several months ago I got a new laptop with Win 7 Pro SP1 64bit. I have done numerous backups on this machine but I've noticed that the file attribute 'archive bit' (a) is not being reset as it was on Win XP. (NOTE: backups were full backups not incremental or differential.) Does Win 7 treat...
Backup and Restore
Reset Spelling and Grammar check
Source - Reset Spelling and Grammar check | Microsoft Office | TechRepublic.com
Microsoft Office


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:25.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App