Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Check Disk will not run windows 7 home Pre

13 May 2013   #1
Noggins

Windows 7 home Premium 32bit
 
 
Check Disk will not run windows 7 home Pre

On boot check disk starts and does not complete, states

Could not complete due to recently installed software package

Ran restore from advanced boot options, still get same error from check disk on startup.

ran Scannow from command prompt, states corrupt files unable to fix some of them. Ran scannow 3 times.

attached a copy of CBS log. I down loaded a copy of the win 7 X17-58997. ISO I just need to burn to DVD.

Is there another way I can fix this? Or do I need to replace one at a time??

Thanks in advance for your help




Attached Files
File Type: txt sfcdetails.txt (110.3 KB, 3 views)
My System SpecsSystem Spec
.
13 May 2013   #2
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Boot from the burned ISO (X17-58997). "repair computer". "command prompt"
Determine the drive letter of windows (not necessary same as in win7!
Code:
diskpart
list  vol
exit
Assume drive letter is D.
Code:
chkdsk/f  D:
Errors? Repaired?
My System SpecsSystem Spec
13 May 2013   #3
gregrocker

 

Other steps here for Troubleshooting Windows 7 Failure to Start.

Start with HD diagnostics, System restore from the Disk's System Recovery Options, run Disk Check given above from Command Line there.

Report back results, continue working through other steps.
My System SpecsSystem Spec
.

13 May 2013   #4
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Aside from doing the above steps, why are you wanting to run chkdsk? I recently had this issue of it not completing and the drive, as it turned out, was bad. A scan with Western Digital Life Guard told me, "Too many errors".
My System SpecsSystem Spec
14 May 2013   #5
kado897

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bit Service Pack 1
 
 

I've had that problem myself where a drive suddenly requires a chkdsk that will not complete. The way I recovered from it was to schedule a chkdsk.Disk Check step 11. I suspect that it is trying to do the chkdsk too late in the startup cycle whereas the scheduled one runs at the correct time.
My System SpecsSystem Spec
14 May 2013   #6
gregrocker

 

+1. Schedule Disk Check or if any interference or unbootable run Disk Check Option 2 from the Installer System Recovery Options or System Repair Disk Command Line.
My System SpecsSystem Spec
16 May 2013   #7
Noggins

Windows 7 home Premium 32bit
 
 

I ran X17-58997. ISO from a dvd and it did not work ( not sure if I did something wrong or not) So I ran HP recovery and reverted to factory set-up, all is good now. Thank-you all for your replies and advice.
My System SpecsSystem Spec
16 May 2013   #8
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by Noggins View Post
I ran X17-58997. ISO from a dvd and it did not work ( not sure if I did something wrong or not) So I ran HP recovery and reverted to factory set-up, all is good now. Thank-you all for your replies and advice.
Glad you solved... all document lost?

What happened after booting from burned ISO? DVD has a few folders and files on it... or just the file called X17-58997.ISO?
My System SpecsSystem Spec
16 May 2013   #9
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

You needed x86 (32bits) ISO???? In your system specs you say you have 32 bits!
Windows 7 Home Premium x86 SP1 U (media refresh)X17-58996.iso Windows 7 Home Premium x64 SP1 U (media refresh)X17-58997.iso
My System SpecsSystem Spec
16 May 2013   #10
Noggins

Windows 7 home Premium 32bit
 
 

Backed up stuff I needed so no data lost.

I set to boot from CD drive first and it acted like it was reading from drive for about 1 min or so and then booted from hard disk. I looked at the DVD and can see something was burned to the disk , but I could not see any thing on it when I tried to open the disk. It was a new DVD and that was the only data I put on it. I also verified the disk at the end of the burning so I don't know what I did wrong.
My System SpecsSystem Spec
Reply

 Check Disk will not run windows 7 home Pre




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Dolby home theater uninstalled after disk check
Hi, so today i opened my laptop and it did a disk check after it was done i noticed that my Dolby home theater was uninstalled, so I went and downloaded it but whenever it tries to install it gives me a message saying that I need to install PCEE, I have no idea where I can install it from. any...
Sound & Audio
Windows 7 No Disk Space after Disk Check Cancellation
Hey Guys, I've been pulling my hair out trying to figure out what my problem is. Basically, we had an issue with the computer and so we force restarted it at one point about a month ago. After that, we started getting requests to run a check disk after every time the computer was rebooted. The...
General Discussion
Windows doing Disk Check every reboot
I bought another pc today to replace my current work pc, now here is what it does since i pulled it out the box I have a ASUS CM687 it runs checkdsk every restart on D, which i think is where the recovery is at for the PC, now it trys to do it and says it was unsuccessful, thing is brand...
Performance & Maintenance
Disk check could not be performed because windows cannot access disk
HI, i have a Transcend StoreJet 25M 640GB external hardisk, at first it was working properly until a time that it wont open. at first it will ask me to format the disk to be able to open it or sometimes it will say ” NOT accessible : the parameter is incorrect” i did some searching and i learned...
Hardware & Devices
Windows Check Disk
Hello. My Windows 7 Check Disk program isn't working at all. I schedule the disk check, but it doesnt occur when I restart. Any reason why?
Performance & Maintenance
Windows check disk thingy not working...
Whenever I reboot, my laptop tells me it needs to check my disk for errors. Unfortunately, it keeps saying there was an error and it can't check the disk. Says some change to my software might be the issue but this is off a fresh install. I tried to re-install, didn't help. Anyone else...
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 20:58.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App