Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Does running Verifier put any kind of load on the system?


26 May 2013   #1

Windows 7 Pro SP1 64 bit
 
 
Does running Verifier put any kind of load on the system?

Hi all,

I configured Verifier.exe to run to see if it might shed some light on freezes and bsods. Anyway, I'm notice my audio playback is now choking every few seconds. I notice a little bump in the cpu load but nothing major.

Well wanted to ask since I made that configuration change and all of sudden the audio issue. I read somewhere that it's good to let it run at least 24 hours. So trying to avoid stopping and starting before that time is up.

Thanks.


My System SpecsSystem Spec
.

26 May 2013   #2

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

I believe it does cause a lag on the PC . It is stressing the drivers to see which driver causes the BSOD . So what you're experiencing is normal when you have DV enabled .
My System SpecsSystem Spec
26 May 2013   #3
whs
Microsoft MVP

Vista, Windows7, Mint Mate, Zorin, Windows 8
 
 

If you have a look into Resource Monitor > CPU tab, you should be able to tell.
My System SpecsSystem Spec
.


26 May 2013   #4

Windows 7 Pro SP1 64 bit
 
 

Quote   Quote: Originally Posted by VistaKing View Post
I believe it does cause a lag on the PC . It is stressing the drivers to see which driver causes the BSOD . So what you're experiencing is normal when you have DV enabled .
Thanks VistaKing. Now if only the system would crash already.
My System SpecsSystem Spec
26 May 2013   #5

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

You're welcome

If you had a few BSODs then I would recommend taking a look at the link below

Blue Screen of Death (BSOD) Posting Instructions

Note   Note
Click on the GRAB ALL button and wait until every file is generated to a folder . It will take a while to complete .


If you have been running DV for 24 hrs and didnt get any BSODs I think its safe to disable the DV .
My System SpecsSystem Spec
26 May 2013   #6

Windows 7 Pro SP1 64 bit
 
 

Quote   Quote: Originally Posted by whs View Post
If you have a look into Resource Monitor > CPU tab, you should be able to tell.
Right, I was looking at a cpu gadget on my screen. Same reading in both though, 25%, which is probably a bit much for idling but doesn't seem like much to cause lagging.
My System SpecsSystem Spec
26 May 2013   #7

Windows 7 Pro SP1 64 bit
 
 

Quote   Quote: Originally Posted by VistaKing View Post
You're welcome

If you had a few BSODs then I would recommend taking a look at the link below

Blue Screen of Death (BSOD) Posting Instructions

Note   Note
Click on the GRAB ALL button and wait until every file is generated to a folder . It will take a while to complete .


If you have been running DV for 24 hrs and didnt get any BSODs I think its safe to disable the DV .
Thanks VK. I did that last year, before the neat(er) interface. But the system has been problematic on and off for some time. One of the recommendation last time was to remove Comodo. I went back and forth on whether to uninstall it. Thing is whenever I'd look at dumps through windbg there were never any cmdagent or other comodo related files. Anyway, apologies for the tangent. It's possible that if DV doesn't help I may utilize the new diagnostic and post again.
My System SpecsSystem Spec
26 May 2013   #8

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

Try running a memory test .

Will need a USB flash drive . Take a close look at Part 3 if you get any errors during the test

RAM - Test with Memtest86+
My System SpecsSystem Spec
26 May 2013   #9

Windows 7 Pro SP1 64 bit
 
 

Quote   Quote: Originally Posted by VistaKing View Post
Try running a memory test .

Will need a USB flash drive . Take a close look at Part 3 if you get any errors during the test

RAM - Test with Memtest86+
That's a good idea. Haven't done one in a while so makes sense. Thank you.
My System SpecsSystem Spec
26 May 2013   #10

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

You're welcome . Report back if anything
My System SpecsSystem Spec
Reply

 Does running Verifier put any kind of load on the system?




Thread Tools



Similar help and support threads for2: Does running Verifier put any kind of load on the system?
Thread Forum
BSOD, computer idling with driver verifier running BSOD Help and Support
running driver verifier and ntoskrnl.exe does not verify Drivers
BSOD when quitting a heavy load game / Driver Verifier BSOD Help and Support
bsod after running driver verifier. BSOD Help and Support
BSOD while running Driver Verifier, probable reason netbt.sys BSOD Help and Support
windows 7 refuses to load and system repair wont load BSOD Help and Support
Solved can not load windows 7 on new system Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:57 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33