Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Defrag on SSHD

27 Jul 2013   #1
fuzzychicken

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 
Defrag on SSHD

Now that I have SSHD installed, I wonder if defrag should be any different than regular HDD. I just do not want to defrag SSD part. So far did not come across anything that will give me access to it, still..

Thanks in advance.


My System SpecsSystem Spec
.
27 Jul 2013   #2
cyclic

Windows 7 home premium x64
 
 

Yes it should be different. Disable it for SSD'd it's not required.
My System SpecsSystem Spec
27 Jul 2013   #3
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

Windows will disable it, you needn`t worry.
My System SpecsSystem Spec
.

27 Jul 2013   #4
fuzzychicken

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by AddRAM View Post
Windows will disable it, you needn`t worry.
So I should just use it like I would use on HDD, right?
My System SpecsSystem Spec
27 Jul 2013   #5
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

Use what ?

Nothing will change, you are not using defrag on the ssd, only on your hd drives.

Open up disk defragmentor and you`ll see next to your ssd it should say "never run" and if you click on configure schedule>select disks you will see your ssd is not even listed.

Don`t worry about it.
My System SpecsSystem Spec
27 Jul 2013   #6
fuzzychicken

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by AddRAM View Post
Use what ?
I was talking about defrag program, like defraggler.
Quote   Quote: Originally Posted by AddRAM View Post
Nothing will change, you are not using defrag on the ssd, only on your hd drives.

Open up disk defragmentor and you`ll see next to your ssd it should say "never run" and if you click on configure schedule>select disks you will see your ssd is not even listed.

Don`t worry about it.
Since this is SSHD, it is not listed as SSD and HDD. It just shows as the drive.

My System SpecsSystem Spec
27 Jul 2013   #7
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

OK, so if those 3 partitions you show there are all on your solid state drive, they say never run, because they haven`t been. Now click on configure schedule, and select disk, your ssd will not be on the list.
My System SpecsSystem Spec
27 Jul 2013   #8
BugMeister

Windows10 Pro - 64Bit vs.10547
 
 

if you leave your PC unattended while at the Windows log-in screen (- ie. don't log in..)
after a while the system will automatically initiate a TRIM of your SSD - it will sort thru
the disk and perform something akin to a defrag.. takes about an hour or so to complete..
My System SpecsSystem Spec
Reply

 Defrag on SSHD




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
SSD/HD vs SSD/SSHD vs SSHD combinations
I just purchased a 128GB SSD to install in my PC and then someone gave me for my birthday a 1TB SSHD. I was originally planning to pair the SSD with a 1TB data drive. I now have several possibilities: 1. Use the SSHD only 2. Use the SSD as the boot drive with a HD data drive (original...
Hardware & Devices
Auslogics Disk Defrag vs IObit Smart Defrag
Which Defragger do you think is better, because I am trying to decide between the two, but can't decide on one or the other.
Software
Auslogics Defrag vs Win7 built-in Defrag?
Auslogic's Disk Defrag is a free utility. Does anyone know how it compares to Win 7's built in defrag utility? Is it worth downloading over what's already there?
Performance & Maintenance
Does Puran Defrag 7.3 Free work with Windows 7 Defrag disabled ?
I normally set the Disk Defragmenter Task Schedule to DISABLED, and leave the Windows Disk Defragmenter defragsvc set to DISABLED. Will Puran Free be able to safely and fully operate under these conditions, or should I change defragsvc to MANUAL. I occasionally create a Macrium FULL image...
Software
Windows Disk Defrag Doesn't Defrag
Disk defrag stops analyzing at 62% and doesn't go any further. So I downloaded Defraggler and ran it. It worked but it wouldn't defrag down to 0% fragmentation, It still shows 4% after defrag.
Performance & Maintenance
Does Windows Defrag defrag system files?
Hi all. Stupid question here... A friend of mine was speaking highly about this PerfectDisk prog because "it defrags system files." I was kind of surprised because I thought (assumed) that the defrag utility built into Windows 7 already defragged system files. Is this not true? I do not...
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:36.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App