Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: WEI Could not measure Processor Performance.

15 Aug 2013   #1
Mysteryman2000

Windows 7 64bit
 
 
WEI Could not measure Processor Performance.

It is as simple as the title, I made sure Windows Media Player was working, I updated all my bios were up to date on my computer, I used the system check to see if there was an error but I am not finding anything. Is there anything that I might be doing wrong? I just recently upgraded my PC with a new CPU the i7-3770k not sure if that could be the problem.

I think I got the right report that is suppose to tell me what does not work, but error reports are not my strong point. Part1:
[spoiler]
188839 (2028) - winsat\logging.cpp:0815: --- START 2013\8\15 16:08:28 PM ---
188839 (2028) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent a4920f9a-8d01-4c47-b42d-4c4c27093b47
188854 (2028) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
189432 (2028) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.
189478 (2028) - winsat\main.cpp:4585: Watch dog system enabled
189478 (2028) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
190227 (2028) - winsat\main.cpp:2490: > DWM Running.
190633 (2028) - winsat\main.cpp:2497: > turning off DWM.
190633 (2028) - winsat\main.cpp:2470: > EMD service will be restored on exit.
190648 (2028) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
190648 (2028) - winsat\main.cpp:2793: > power policy saved.
190758 (2028) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
190758 (2028) - winsat\main.cpp:2814: > power policy set to maximum.
191803 (2028) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
191803 (2028) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
191803 (2028) - winsat\main.cpp:1775: > Run Assessment features
192084 (2028) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
203908 (2028) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 108536000
203908 (2028) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
203908 (2028) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
210164 (2028) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
216544 (2028) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
222847 (2028) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
229259 (2028) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
235452 (2028) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
241505 (2028) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
247682 (2028) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
253860 (2028) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
262565 (2028) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
270895 (2028) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
276854 (2028) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
278789 (2028) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_MPEG2_HD_15mbps.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
285809 (2028) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_VC1_15mbps.wmv -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 135 -expfrmmax 150 -overrideframetype prog
291924 (2028) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_480i_5sec_6mbps_new.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
298336 (2028) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_480p_5sec_6mbps_new.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 135 -expfrmmax 150 -overrideframetype prog
304576 (2028) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_10mbps_h264.mp4 -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 135 -expfrmmax 150 -overrideframetype prog
310769 (2028) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_480_5sec_6mbps_h264.mp4 -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
316900 (2028) - winsat\main.cpp:1775: > Run Assessment media -input C:\Windows\Performance\WinSAT\winsatencode.wmv -encode C:\Windows\Performance\WinSAT\winsat.prx
317430 (2028) - media\mediaerror.cpp:0151: mediautils.cpp @ 592: 0x80004005 == E_FAIL
317430 (2028) - media\mediaerror.cpp:0151: mediatest.cpp @ 503: 0x80004005 == E_FAIL
317430 (2028) - media\mediaerror.cpp:0095: Error: WinSAT failed to connect the input file to the WMV encoder.
317430 (2028) - winsat\main.cpp:2056: > media Assessment FAILED due to an error
317430 (2028) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 108536000
317430 (2028) - winsat\processresults.cpp:1253: Skipping StdDefPlayback limit check.
317430 (2028) - winsat\processresults.cpp:1265: Skipping StdDefPlayback limit check.
317430 (2028) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
317462 (2028) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
317462 (2028) - winsat\main.cpp:2855: > Power state restored.
317462 (2028) - winsat\main.cpp:2870: > Successfully reenabled EMD.
317555 (2028) - winsat\main.cpp:2896: > Composition restarted
317571 (2028) - winsat\watchdog.cpp:0311: Watch dog system shutdown
317571 (2028) - winsat\main.cpp:4909: > exit value = 1.

363217 (6580) - winsat\logging.cpp:0815: --- START 2013\8\15 16:11:22 PM ---
363217 (6580) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent b25bc91d-6a37-4a00-8c9e-779e8424195e
363217 (6580) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
363232 (6580) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.
363263 (6580) - winsat\main.cpp:4585: Watch dog system enabled
363263 (6580) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
363903 (6580) - winsat\main.cpp:2490: > DWM Running.
364199 (6580) - winsat\main.cpp:2497: > turning off DWM.
364199 (6580) - winsat\main.cpp:2470: > EMD service will be restored on exit.
364355 (6580) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
364355 (6580) - winsat\main.cpp:2793: > power policy saved.
364387 (6580) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
364387 (6580) - winsat\main.cpp:2814: > power policy set to maximum.
365198 (6580) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
365198 (6580) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
365198 (6580) - winsat\main.cpp:1775: > Run Assessment features
365494 (6580) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
377350 (6580) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 107709000
377350 (6580) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
377350 (6580) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
383512 (6580) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
389581 (6580) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
395852 (6580) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
402248 (6580) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
408301 (6580) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
414416 (6580) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
420578 (6580) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
426725 (6580) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
435367 (6580) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
443994 (6580) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
449953 (6580) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
451248 (6580) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_MPEG2_HD_15mbps.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
457816 (6580) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_VC1_15mbps.wmv -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 135 -expfrmmax 150 -overrideframetype prog
463946 (6580) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_480i_5sec_6mbps_new.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
470811 (6580) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_480p_5sec_6mbps_new.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 135 -expfrmmax 150 -overrideframetype prog
477175 (6580) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_10mbps_h264.mp4 -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 135 -expfrmmax 150 -overrideframetype prog
483540 (6580) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_480_5sec_6mbps_h264.mp4 -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
489889 (6580) - winsat\main.cpp:1775: > Run Assessment media -input C:\Windows\Performance\WinSAT\winsatencode.wmv -encode C:\Windows\Performance\WinSAT\winsat.prx
490123 (6580) - media\mediaerror.cpp:0151: mediautils.cpp @ 592: 0x80004005 == E_FAIL
490123 (6580) - media\mediaerror.cpp:0151: mediatest.cpp @ 503: 0x80004005 == E_FAIL
490123 (6580) - media\mediaerror.cpp:0095: Error: WinSAT failed to connect the input file to the WMV encoder.
490123 (6580) - winsat\main.cpp:2056: > media Assessment FAILED due to an error
490123 (6580) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 107709000
490123 (6580) - winsat\processresults.cpp:1253: Skipping StdDefPlayback limit check.
490123 (6580) - winsat\processresults.cpp:1265: Skipping StdDefPlayback limit check.
490123 (6580) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
490155 (6580) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
490155 (6580) - winsat\main.cpp:2855: > Power state restored.
490155 (6580) - winsat\main.cpp:2870: > Successfully reenabled EMD.
490170 (6580) - winsat\main.cpp:2896: > Composition restarted
490170 (6580) - winsat\watchdog.cpp:0311: Watch dog system shutdown
490170 (6580) - winsat\main.cpp:4909: > exit value = 1.
[/spoiler]


My System SpecsSystem Spec
.

15 Aug 2013   #2
Mysteryman2000

Windows 7 64bit
 
 

part2:

1339502 (6384) - winsat\logging.cpp:0815: --- START 2013\8\15 19:18:44 PM ---
1339502 (6384) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent 3f303330-2bac-40cf-8c3f-0ccf1dc2a191
1339502 (6384) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
1339518 (6384) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.
1339549 (6384) - winsat\main.cpp:4585: Watch dog system enabled
1339549 (6384) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
1340173 (6384) - winsat\main.cpp:2490: > DWM Running.
1340532 (6384) - winsat\main.cpp:2497: > turning off DWM.
1340532 (6384) - winsat\main.cpp:2470: > EMD service will be restored on exit.
1340532 (6384) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
1340532 (6384) - winsat\main.cpp:2793: > power policy saved.
1340594 (6384) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
1340594 (6384) - winsat\main.cpp:2814: > power policy set to maximum.
1341405 (6384) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
1341405 (6384) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
1341405 (6384) - winsat\main.cpp:1775: > Run Assessment features
1341702 (6384) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
1353402 (6384) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 108012000
1353402 (6384) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
1353402 (6384) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
1359533 (6384) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
1365523 (6384) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
1371747 (6384) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
1378003 (6384) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
1384072 (6384) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
1390109 (6384) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
1396255 (6384) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
1402324 (6384) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
1410888 (6384) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
1419219 (6384) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
1425162 (6384) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
1426894 (6384) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_MPEG2_HD_15mbps.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
1433711 (6384) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_VC1_15mbps.wmv -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 135 -expfrmmax 150 -overrideframetype prog
1439764 (6384) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_480i_5sec_6mbps_new.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
1446176 (6384) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_480p_5sec_6mbps_new.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 135 -expfrmmax 150 -overrideframetype prog
1452353 (6384) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_10mbps_h264.mp4 -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 135 -expfrmmax 150 -overrideframetype prog
1458500 (6384) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_480_5sec_6mbps_h264.mp4 -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
1464537 (6384) - winsat\main.cpp:1775: > Run Assessment media -input C:\Windows\Performance\WinSAT\winsatencode.wmv -encode C:\Windows\Performance\WinSAT\winsat.prx
1464958 (6384) - media\mediaerror.cpp:0151: mediautils.cpp @ 592: 0x80004005 == E_FAIL
1464974 (6384) - media\mediaerror.cpp:0151: mediatest.cpp @ 503: 0x80004005 == E_FAIL
1464974 (6384) - media\mediaerror.cpp:0095: Error: WinSAT failed to connect the input file to the WMV encoder.
1464974 (6384) - winsat\main.cpp:2056: > media Assessment FAILED due to an error
1464974 (6384) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 108012000
1464974 (6384) - winsat\processresults.cpp:1253: Skipping StdDefPlayback limit check.
1464974 (6384) - winsat\processresults.cpp:1265: Skipping StdDefPlayback limit check.
1464974 (6384) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
1464989 (6384) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
1465005 (6384) - winsat\main.cpp:2855: > Power state restored.
1465005 (6384) - winsat\main.cpp:2870: > Successfully reenabled EMD.
1465020 (6384) - winsat\main.cpp:2896: > Composition restarted
1465020 (6384) - winsat\watchdog.cpp:0311: Watch dog system shutdown
1465020 (6384) - winsat\main.cpp:4909: > exit value = 1.
My System SpecsSystem Spec
Reply

 WEI Could not measure Processor Performance.




Thread Tools





Similar help and support threads
Thread Forum
Why did my processor performance drop?
Just yesterday I noticed that my Windows experience index scored my processor at a 2.9 when it has always been way higher than that. It caused me to investigate and download a program called CPUID to see how my processor was actually running, and no matter how hard I tried I couldn't get it to go...
Performance & Maintenance
WEI - Cannot measure processor performance
Hi I have a new laptop. As I finished the installation of various drivers and what not, I then proceeded to the Windows experience index. But, unfortunately, just right after the 50% mark, I get an error: Cannot measure processor performance Help please! My laptop specs are: - Acer...
Performance & Maintenance
Could not measure video playback performance
is there any driver(s) needed to solve this problem? anyone please..
Drivers
Performance with Windows 7 and Laptop(i5 processor)
We have a standalone application which was originally developed in Winforms but now we are gradually migrating it to WPF. As of now its partly Winform(60%) and partly WPF(40%). We have already done few releases of the application and things were fine. Recently several of our colleagues upgraded...
General Discussion
WEI - Cannot measure processor performance
I have searched for an answer and followed a few suggestions, but keep getting the same error. Here is the log file: 896849 (4808) - winsat\logging.cpp:0815: --- START 2010\11\18 3:16:51 AM --- 896849 (4808) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal...
Performance & Maintenance
"Could not measure video playback performance"
what's the problem?? help plz Computer: Computer Type ACPI x86-based PC Operating System Microsoft Windows 7 Ultimate OS Service Pack - Internet Explorer ...
Performance & Maintenance

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:14.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App