Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: User Accounts

22 Aug 2013   #21
tyler4402

Windows7 Pro SP1 64 bit
 
 

Hi again, I did run the ADWCleaner but on the request to reboot the PC would not shut down (although it has taken a little longer than usual just lately) so I did it with the power switch, on boot-up I had a black screen for a long tome before the OP System loaded, anyway I tried to run the JRT program as administrator & it would not start, the message was 7-Zip Internal Error Code 105, I also tried opening the prog and running it from the DT and got the same message.
Regards Robert.




Attached Files
File Type: txt AdwCleaner[S0].txt (4.4 KB, 3 views)
File Type: txt AdwCleaner[R0].txt (4.9 KB, 2 views)
My System SpecsSystem Spec
.
22 Aug 2013   #22
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

Scan on one Browser . Either or on or

On
Hold down Control and click on ESET Online Scanner to open ESET OnlineScan in a new window
Click the button
Check YES, I accept the Terms of Use.
Click the Start button.
Accept any security warnings from your browser.
Under scan settings, check "Scan Archives" and "Remove found threats"
Click Advanced settings and select the following:
Scan potentially unwanted applications
Scan for potentially unsafe applications
Enable Anti-Stealth technology
ESET will then download updates for itself, install itself, and begin scanning your computer. Please be patient as this can take some time.
When the scan completes, click List Threats
Click Export, and save the file to your desktop using a unique name, such as ESETScan. Include the contents of this report in your next reply.
Click the Back button.
Click the Finish button.


On or
Click on esetsmartinstaller_enu.exe to download the ESET Smart Installer. Save it to your desktop.
Right click on choose on your desktop
Check YES, I accept the Terms of Use.
Click the Start button.
Accept any security warnings from your browser.
Under scan settings, check "Scan Archives" and "Remove found threats"
Click Advanced settings and select the following:
Scan potentially unwanted applications
Scan for potentially unsafe applications
Enable Anti-Stealth technology
ESET will then download updates for itself, install itself, and begin scanning your computer. Please be patient as this can take some time.
When the scan completes, click List Threats
Click Export, and save the file to your desktop using a unique name, such as ESETScan. Include the contents of this report in your next reply.
Click the Back button.
Click the Finish button.
My System SpecsSystem Spec
22 Aug 2013   #23
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

Delete the JRT . And Redownload JRT and try to run it again after the Eset Scan .
My System SpecsSystem Spec
.

22 Aug 2013   #24
tyler4402

Windows7 Pro SP1 64 bit
 
 

Hi, I downloaded E-set for Chrome as that is the browser I use although I do have Internet Explorer to use when needed. All other browsers I have tried should have been uninstalled.
I clicked "Run as Admin" checked E-set's terms of use and clicked start, then I got the message that I need administrator permissions for installation.
So I downloaded the JRT again and got the same Error Code 105 again. (Back with you tomorrow) :-) Regards Robert.
My System SpecsSystem Spec
22 Aug 2013   #25
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

Try with Safe Mode with Networking
My System SpecsSystem Spec
23 Aug 2013   #26
tyler4402

Windows7 Pro SP1 64 bit
 
 

Hi VistaKing, Unfortunately the PC would not shut down last night, I tried a reboot and as the PC booted I only got a Black screen after 10 mins I turned off the power.
This morning the PC started but I had no functions .i.e no start button or other any other icon functioned, after a reboot I managed to get the "Advanced boot Options" and started with last good config, otherwise you probably would not have heared from me again :-) so I will do as you suggest and try Safe Mode and see if the programs you have sent work, before we go for the shopping :-) back later in the day regards Robert
My System SpecsSystem Spec
23 Aug 2013   #27
tyler4402

Windows7 Pro SP1 64 bit
 
 

Managed to run JRT in safe mode, Adw will still not work due to no admin permissions, the PC is freezing a lot & the buttons on the task bar stop working so I have to keep rebooting.
Had a look at the Events Log and it is all red & Yellow anyway back later, regards Robert.


Attached Files
File Type: txt JRT.txt (114.9 KB, 8 views)
My System SpecsSystem Spec
23 Aug 2013   #28
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

Delete the old FRST.exe and the old FRST.txt and Redownload a new copy on post #17 and run it and upload the new FRST.txt
My System SpecsSystem Spec
23 Aug 2013   #29
tyler4402

Windows7 Pro SP1 64 bit
 
 

Hope this helps.


Attached Files
File Type: txt FRST.txt (25.8 KB, 8 views)
My System SpecsSystem Spec
23 Aug 2013   #30
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

I'm seeing this activate.adobe.com ? Uninstall of the adobe software . That is by passing the activation server for adobe software
My System SpecsSystem Spec
Reply

 User Accounts




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Unknown user showing in user accounts - possibly compromised?
Hi all, Hoping someone might be able to help. Recently, a few strange things have happened with the PC, which first started when I found I couldn't use the Backup & Recovery software in Windows 7. Whenever I clicked on one of the buttons with a shield, nothing would happen at all. I've looked...
System Security
User accounts created but not able to logon - No user profile
I am a lab technician for Microsoft classes at a community college. One of our students somehow messed up his hard drive. The computer is running Windows 7 Enterprise SP1 64-bit. The system has two administrator accounts and one standard user account. I am still able to logon with those accounts...
General Discussion
User Accounts
Hekko Does Advanced Users Accounts which is started via windows\system32\netplwiz.exe still relevant.At the moment it shows me as the Administrator and under the Advanced tab you can do other things If you then navigate to the Control Panel\User Accounts on the left pane there is another...
General Discussion
User Accounts X 2
On my Laptop running Win7 Home Prem, I have only one user account (administrator) all programs were installed by first unblocking them then installed by ' Run as Administrator'. I want to know what will/could happen if I add another Administrator Account, then change my original to a 'Standard...
General Discussion
User Accounts / Manage Accounts Blank
Hello I have been chasing up an answer to this problem for a couple of weeks now and have found a number of people with same symptoms but no answer which works. When I go to the User Accouns page the dialog box for the "Choose the Account you would like to change" is blank. I am an...
General Discussion
User accounts
I did an upgrade from Vista to w7 ultimate and everything went great so i set up user accounts that werent there before. I wanted to set up as administrator the upgrade version, and 2 standard accounts. Now what happened is the admin account is new and the upgrade account is set as a regular...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:42.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App