Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: SFC/Scannow errors

05 Oct 2013   #1
willburstyle06

NY
 
 
SFC/Scannow errors

I'm having trouble installing Windows 7 Service Pack 1 KB976932, after downloading the update on reboot it says updated failed and reverts changes. I ran a SFC/Scannow command and the following two errors came up as un-fixable.

2013-10-04 23:16:21, Info CSI 0000003d [SR] Beginning Verify and Repair transaction
2013-10-04 23:16:21, Info CSI 0000003f [SR] Cannot repair member file [l:18{9}]"bfsvc.exe" of Microsoft-Windows-BootEnvironment-Servicing, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2013-10-04 23:16:22, Info CSI 00000042 [SR] Cannot repair member file [l:18{9}]"bfsvc.exe" of Microsoft-Windows-BootEnvironment-Servicing, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2013-10-04 23:16:22, Info CSI 00000043 [SR] This component was referenced by [l:202{101}]"Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7600.16385.WindowsFoundationDelivery"
2013-10-04 23:16:22, Info CSI 00000046 [SR] Could not reproject corrupted file [ml:520{260},l:28{14}]"\??\C:\Windows"\[l:18{9}]"bfsvc.exe"; source file in store is also corrupted
2013-10-04 23:16:22, Info CSI 00000048 [SR] Verify complete






2013-10-04 23:17:38, Info CSI 00000156 [SR] Beginning Verify and Repair transaction
2013-10-04 23:17:38, Info CSI 00000158 [SR] Cannot repair member file [l:26{13}]"fveupdate.exe" of Microsoft-Windows-SecureStartup-BootServicing-Utility, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2013-10-04 23:17:38, Info CSI 0000015a [SR] Cannot repair member file [l:26{13}]"fveupdate.exe" of Microsoft-Windows-SecureStartup-BootServicing-Utility, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2013-10-04 23:17:38, Info CSI 0000015b [SR] This component was referenced by [l:202{101}]"Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7600.16385.WindowsFoundationDelivery"
2013-10-04 23:17:38, Info CSI 0000015e [SR] Could not reproject corrupted file [ml:520{260},l:28{14}]"\??\C:\Windows"\[l:26{13}]"fveupdate.exe"; source file in store is also corrupted
2013-10-04 23:17:39, Info CSI 00000160 [SR] Verify complete






These errors were in the sfcdetails notepad created. Any ideas how to fix them.


My System SpecsSystem Spec
.

05 Oct 2013   #2
MilesAhead

Windows 7 32 bit
 
 

Do you have a Restore Point previous to the one made by the SP install? If that doesn't work you may have to do a repair install.

edit: if possible I would make a backup image to an external drive first. Always set up if you can to get back to where you are currently. Otherwise you can go down a slippery slope until the system is unusable. Hopefully not but it's good to be prepared with a bail out strategy.
My System SpecsSystem Spec
05 Oct 2013   #3
willburstyle06

NY
 
 

I was hoping to be able to replace these two files fveupdate.exe and bfsve.exe from another clean windows version. Can anyone tell me what those two files are? I'm pretty sure they are related to my inability to install windows servicepack1
My System SpecsSystem Spec
.


06 Oct 2013   #4
willburstyle06

NY
 
 

I was able to repair the fveupdate.exe by replacing it in the command line by and extracted fveupdate.exe file from an windows 7 dvd. The bfsve.exe file even after being replaced was still corrupt. I ran sfc/scannow and only the bfsve.exe error is left. Can someone please tell me what the bfsve.exe file is and how to fix it?
My System SpecsSystem Spec
Reply

 SFC/Scannow errors




Thread Tools





Similar help and support threads
Thread Forum
SFC /Scannow Cannot Repair Errors
Being new to this forum, excuse any incorrect requests... Anyway, I have a Lenovo PC that started having very long boot up time (greater than 12 minutes). Have checked everything possible, no Malware found, viruses, Trojans and so on. Tried all that I know to try and fix problem with no luck...
Performance & Maintenance
Scannow errors that can't be repaired
I ran sfc /scannow today and there were some files that were erred and couldn't be repaired. Whenever I ran that before it always repaired so this is kind of new for me. The reason this is bothering me is I installed some folder icons that were custom and they installed OK and all, but I went to...
General Discussion
SFC /SCANNOW Errors + Unable To Fix
Recently I been getting BSODs here and there. Some of the errors were dxgmms1.sys and the latest one was memory management. I ran sfc /scannow from cmd (I did right click and select run as admin) and it found some errors and said it was unable to fix them. I ran sfc 3-4 times and it still couldn't...
Performance & Maintenance
How to fix errors not fixed by Sfc /scannow (cmd.log)
Hi there, I recently did a clean install (Win7 Home Premium 64bit) on my 1,5 year old Lenovo laptop and ran into some issues, such as slow and unresponsive windows explorer. Following the steps suggested elsewhere, I ran a file check (Sfc /scannow) and the cmd.log tells me that the following...
Performance & Maintenance
Did sfc /scannow have errors.
So I did the sfc /scannow on my wifes puter. Got to 2% and had errors the scan stopped and that the errors could not be fixed. I looked at the log and am not sure what this means. I am using Windows 7 home premium. Thanks for any help.
Performance & Maintenance

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:04.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App