Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: sfc /scannow unable to repair files (cbs.log inside)

13 Oct 2013   #1
vram

Windows 7 64-bit
 
 
sfc /scannow unable to repair files (cbs.log inside)

For some reason, sfc /scannow cannot repair this file corruption. My PC boots and appears to run fine. Also ran the scan offline, with the same error. Here are the contents of the error in the cbs log file:

Quote:
2013-10-13 09:51:44, Info CBS Starting TrustedInstaller initialization.
2013-10-13 09:51:44, Info CBS Loaded Servicing Stack v6.1.7601.17592 with Core: C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\cbscore.dll
2013-10-13 09:51:45, Info CSI 00000001@2013/10/13:13:51:45.574 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7fef694f0ad @0x7fef6c09849 @0x7fef6bd34e3 @0xff99e97c @0xff99d799 @0xff99db2f)
2013-10-13 09:51:45, Info CSI 00000002@2013/10/13:13:51:45.574 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7fef694f0ad @0x7fef6c56816 @0x7fef6c22aac @0x7fef6bd35b9 @0xff99e97c @0xff99d799)
2013-10-13 09:51:45, Info CSI 00000003@2013/10/13:13:51:45.574 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7fef694f0ad @0x7fef6808738 @0x7fef6808866 @0xff99e474 @0xff99d7de @0xff99db2f)
2013-10-13 09:51:45, Info CBS Ending TrustedInstaller initialization.
2013-10-13 09:51:45, Info CBS Starting the TrustedInstaller main loop.
2013-10-13 09:51:45, Info CBS TrustedInstaller service starts successfully.
2013-10-13 09:51:45, Info CBS SQM: Initializing online with Windows opt-in: False
2013-10-13 09:51:45, Info CBS SQM: Cleaning up report files older than 10 days.
2013-10-13 09:51:45, Info CBS SQM: Requesting upload of all unsent reports.
2013-10-13 09:51:45, Info CBS SQM: Failed to start upload with file pattern: C:\Windows\servicing\sqm\*_std.sqm, flags: 0x2 [HRESULT = 0x80004005 - E_FAIL]
2013-10-13 09:51:45, Info CBS SQM: Failed to start standard sample upload. [HRESULT = 0x80004005 - E_FAIL]
2013-10-13 09:51:45, Info CBS SQM: Failed to start upload with file pattern: C:\Windows\servicing\sqm\*_all.sqm, flags: 0x6 [HRESULT = 0x80004005 - E_FAIL]
2013-10-13 09:51:45, Info CBS SQM: Failed to start always sample upload. [HRESULT = 0x80004005 - E_FAIL]
2013-10-13 09:51:45, Info CBS SQM: Warning: Failed to upload all unsent reports. [HRESULT = 0x80004005 - E_FAIL]
2013-10-13 09:51:45, Info CBS No startup processing required, TrustedInstaller service was not set as autostart, or else a reboot is still pending.
2013-10-13 09:51:45, Info CBS NonStart: Checking to ensure startup processing was not required.
2013-10-13 09:51:45, Info CSI 00000004 IAdvancedInstallerAwareStore_ResolvePendingTransactions (call 1) (flags = 00000004, progress = NULL, phase = 0, pdwDisposition = @0xf8fd70
2013-10-13 09:51:45, Info CSI 00000005 Creating NT transaction (seq 1), objectname [6]"(null)"
2013-10-13 09:51:45, Info CSI 00000006 Created NT transaction (seq 1) result 0x00000000, handle @0x1e0
2013-10-13 09:51:46, Info CSI 00000007@2013/10/13:13:51:46.276 CSI perf trace:
CSIPERF:TXCOMMIT;14407
2013-10-13 09:51:46, Info CBS NonStart: Success, startup processing not required as expected.
2013-10-13 09:51:46, Info CBS Startup processing thread terminated normally
2013-10-13 09:51:46, Info CSI 00000008 CSI Store 4246848 (0x000000000040cd40) initialized
2013-10-13 09:51:46, Info CBS Session: 30328859_1532925562 initialized by client lpksetup.
2013-10-13 09:51:46, Info CBS Session: 30328859_1532925562 finalized. Reboot required: no [HRESULT = 0x00000000 - S_OK]



My System SpecsSystem Spec
.

13 Oct 2013   #2
Dude

Windows 8.1 Pro + Windows 10
 
 

vram, it is best to run sfc at least three times. If you have not done that, try it while waiting for someone to view your cbs log. If it still will not repair, try a repair install.

System Repair
My System SpecsSystem Spec
13 Oct 2013   #3
vram

Windows 7 64-bit
 
 

Quote   Quote: Originally Posted by Dude View Post
vram, it is best to run sfc at least three times. If you have not done that, try it while waiting for someone to view your cbs log.
I've probably ran it a total of 4 actually
My System SpecsSystem Spec
.


13 Oct 2013   #4
Dude

Windows 8.1 Pro + Windows 10
 
 

Okay, then you can try the repair install. If you are not comfortable with that, give a little time for some one to analyze your cbs log. Good luck
My System SpecsSystem Spec
13 Oct 2013   #5
vram

Windows 7 64-bit
 
 

I know how to do a repair install, but I'll wait, thanks
My System SpecsSystem Spec
13 Oct 2013   #6
whs
Microsoft MVP

Vista, Windows7, Mint Mate, Zorin, Windows 8
 
 

Quote   Quote: Originally Posted by vram View Post
I know how to do a repair install, but I'll wait, thanks
Why wait - it does not hurt.
My System SpecsSystem Spec
14 Oct 2013   #7
vram

Windows 7 64-bit
 
 

Quote   Quote: Originally Posted by whs View Post
Quote   Quote: Originally Posted by vram View Post
I know how to do a repair install, but I'll wait, thanks
Why wait - it does not hurt.
I went ahead and did a repair install. Everything is good now, but I'd still like an answer for future reference
My System SpecsSystem Spec
14 Oct 2013   #8
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

The cbs.log doesn't seem to be complete. Mine was well over 100 lines.
My System SpecsSystem Spec
15 Oct 2013   #9
Dude

Windows 8.1 Pro + Windows 10
 
 

Quote   Quote: Originally Posted by vram View Post
Quote   Quote: Originally Posted by whs View Post
Quote   Quote: Originally Posted by vram View Post
I know how to do a repair install, but I'll wait, thanks
Why wait - it does not hurt.
I went ahead and did a repair install. Everything is good now, but I'd still like an answer for future reference
Not sure on the log, but glad everything is good.
My System SpecsSystem Spec
Reply

 sfc /scannow unable to repair files (cbs.log inside)




Thread Tools





Similar help and support threads
Thread Forum
tom982 - sfc /scannow unable to repair missing ATL80.dll file
Hello, I read with interest that tom982 has a way of giving special instructions for repairing corrupt or missing files that sfc /scannow is unable to repair. Maybe others can also help me with this, but I only looked at the following thread mentioning tom982 (so far):...
Performance & Maintenance
sfc/scannow Could not repair corrupted files; CBS.log not showing any
Hello, I am using Windows 8 (64-bit version) and have recently had a virus which I have quarantined and removed. After restarting my computer it seemed that Windows 8 was taking ages to boot around 3 minutes compared to it's usual half minute start up and login. Searching online I found that...
Performance & Maintenance
Scannow cannot repair corrupted files
Hello to everyone, I am new here & looking for help with a computer issue. Any help given is greatly appreciated. I'll start from the beginning. For awhile now but only very occasionally I am getting BSOD crashes & then the computer restarts. So today I decided to do some detective work & try to...
Performance & Maintenance
BSOD , when I : sfc / scannow cannot repair files
I have disconnected one of my HDs for audiorecoding. Windows seems to try to boot from it from time to time. Sometimes when I cant boot, the windows installation cant be found at all. Win keeps telling me to change the wireless USB to a faster one, and somtimes it drops out.I have updated all...
BSOD Help and Support
Sfc/Scannow cannot repair corrupt .inf and .nlp files
I have run sfc/scannow in win 7, and have followed instructions to run sfc at boot in command prompt, but nothing has solved the errors. i have saved the file sfcdetails.txt to desktop, and have extracted only the problematic parts and saved it in another file problems.txt kindly check the file,...
Performance & Maintenance
sfc scannow can't repair files
Hi guys. I was having problems with my wallpaper (couldn't change it) after fresh instalation of windows and I found a solution on somewhere on the interent. (I had to delate one file). But they also said I could do scannow using cmd.exe. So I did it. in CBS..log i found sth like this: ...
Performance & Maintenance

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:04.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App