Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: windows 7 start only in safe mode and the repair option is missing

05 Dec 2013   #1
Dexte7

Windows 7 Ultimate x64
 
 
windows 7 start only in safe mode and the repair option is missing

Hi first of all sorry for my bad English...

I can not start the computer in normal mode, only in safe mode
I tried system restore but still I can not run Windows 7 in normal mode

When I press f8 at startup option to repair your computer is not listed as an option.
i tried system restores but without any success.
i also tried reagentc/enable by searching solutions in one of the posts here and its says it on but when i startup the f8 i still can't find the repair option.

I don't have the installation cd and I cannot currently get the cd,any suggestions?
Thanks.


My System SpecsSystem Spec
.
05 Dec 2013   #2
Ztruker

Windows 10 Pro X64
 
 

If you do not have a Windows 7 installation DVD, or it's not up to the Service Pack level currently installed, you can download a legal copy with SP1 integrated from here:

Windows 7 Direct Download Links

Make sure you get the same version you have, Home Premium, Pro or Ultimate and 32 or 64 bit. Note that Basic or Starter is not available.

I recommend using ImgBurn at 4X speed (or the slowest available) to create the DVD from the downloaded .iso file. Just be careful during the install not to accidentally install some of the bundled junk that comes with it. Always take The Custom Install option.

You can do this on any computer capable of burning a DVD.

YOU MUST HAVE A VALID KEY TO INSTALL THIS .ISO. The one on the COA sticker on your computer will work.

You can also create a bootable USB Flash drive (4GB or larger) to install Windows 7 from.
  1. Download and run Universal USB Installer Easy as 1 2 3
  2. Select Windows 7 from the first drop down list, all the way to the bottom
  3. Select the downloaded Windows 7 iso file
  4. Select your USB flash drive
  5. Click Create
For techies or folks who work on computers: Create Windows 7 Universal ISO With All Editions Selection On Install with ei.cfg Removal Utility.

This will fit on a 6GB flash drive or can be burned to a DVD.
My System SpecsSystem Spec
06 Dec 2013   #3
Dexte7

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by Ztruker View Post
If you do not have a Windows 7 installation DVD, or it's not up to the Service Pack level currently installed, you can download a legal copy with SP1 integrated from here:

Windows 7 Direct Download Links

Make sure you get the same version you have, Home Premium, Pro or Ultimate and 32 or 64 bit. Note that Basic or Starter is not available.

I recommend using ImgBurn at 4X speed (or the slowest available) to create the DVD from the downloaded .iso file. Just be careful during the install not to accidentally install some of the bundled junk that comes with it. Always take The Custom Install option.

You can do this on any computer capable of burning a DVD.

YOU MUST HAVE A VALID KEY TO INSTALL THIS .ISO. The one on the COA sticker on your computer will work.

You can also create a bootable USB Flash drive (4GB or larger) to install Windows 7 from.
  1. Download and run Universal USB Installer Easy as 1 2 3
  2. Select Windows 7 from the first drop down list, all the way to the bottom
  3. Select the downloaded Windows 7 iso file
  4. Select your USB flash drive
  5. Click Create
For techies or folks who work on computers: Create Windows 7 Universal ISO With All Editions Selection On Install with ei.cfg Removal Utility.

This will fit on a 6GB flash drive or can be burned to a DVD.

wow i thought it's going to be complicated i did it with the USB option that you said and now my pc works better than ever.
thanks a lot for the help.
My System SpecsSystem Spec
.

06 Dec 2013   #4
Ztruker

Windows 10 Pro X64
 
 

Glad I could help.
My System SpecsSystem Spec
Reply

 windows 7 start only in safe mode and the repair option is missing




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Start up repair and safe mode not intializing
OK so I have an HP pavilion about two years old. When I tried to log in today, it froze on the login screen, so I manually turned the computer off. When I rebooted it, I said 'start computer normally' it went to the windows loading screen and then after two second it said loading files with a...
General Discussion
Startup repair after "Windows is Loading Files".Cant start safe mode
This is my first time being on these forums. If this is the wrong place to post about this, I apologize in advance. Background on how this all started vvvvvv I have a hp pavilion dm4 laptop with windows 7 home premium OS. This laptop is about a year and 2 months old. Warranty has expired. 2...
Backup and Restore
'Repair your computer' option boots into Windows regular mode
I have a Dell Studio 1555, win 7 Home Premium. I am trying to restore the system to Factory default. After pressing F8 at startup, when I select 'Repair your computer', it boots into regular Windows. I think it has something to do with the Partition identifiers? Please help. Thanks.
Performance & Maintenance
can't start normally or in safe mode, just gives restore option
I have problems with my HP laptop. When I switch it on, it goes straight to 'restore your PC to factory state' and if I click no, laptop turns off immediately by itself. If I try to use any of the other option: start normally or safe mode options, when I click on them it takes me back to 'restore...
General Discussion
64bit laptop crashed and wont start on safe mode,system repair failed
please help i just crashed som1 64 bit lennovo laptop while i opperate a 32 bit pc dont have any windows system with me,it wont start on safe mode,and system repair has failed many times.the laptop was running on low battry and it shut itself,when i tryed to reboot it,it automaticly went to system...
General Discussion
Windows crashed. Now can't boot, even in repair mode or safe mode.
Let me open by saying I'm too old to understand most of the jargon and directions found in a technical forum like this. I've been trying to fix this myself for about two weeks, and have made so many changes, I've probably made a complete hash of it. The latest thing I did was to attempt a...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:45.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App