Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: sfc /scannow error

08 Dec 2013   #1
tommytinkroom

Windows 7 home premium 64bit sp1
 
 
sfc /scannow error

Hi,I recently ran a sfc /scannow and when it finished it showed "windows resource protection found corrupt files but was unable to fix some of them" and to check cbs logfile.
I originally ran this scan because i was getting a problem when opening
photoshop cc,which was giving me an alert saying something like "ON
dll is missing,i then had to click off this alert about 6 times then photoshop
would open.
But since i ran the sfc /scannow it appears to have fixed it,but i don't know
why it's showing "windows resource protection found corrupt files but was unable to fix some of them".
Also my laptop appears to be running fine and is very responsive.MBAM Pro and Avast IS
report no threats found.
Here's the cbs logfile,thanks for any help.


My System SpecsSystem Spec
.
08 Dec 2013   #2
Brink

64-bit Windows 10 Pro
 
 

Hello Tommy,

This is a common message when SFC is unable to repair any files the first round. You could go through the items listed in the blue Note box at the bottom of step 4 in OPTION TWO of the tutorial below may be able to help allow SFC to repair them afterwards.

SFC /SCANNOW Command - System File Checker

Hope this helps,
Shawn
My System SpecsSystem Spec
08 Dec 2013   #3
tommytinkroom

Windows 7 home premium 64bit sp1
 
 

Quote   Quote: Originally Posted by Brink View Post
Hello Tommy,

This is a common message when SFC is unable to repair any files the first round. You could go through the items listed in the blue Note box at the bottom of step 4 in OPTION TWO of the tutorial below may be able to help allow SFC to repair them afterwards.

SFC /SCANNOW Command - System File Checker

Hope this helps,
Shawn
Hi Brink,

I just ran the scannow 6 tmes and it still shows "windows resource protection found corrupt files but was unable to fix some of them".
Should i pursue this matter any further being as the laptop is running fine?
I don't even know what the corrupt files are.
My System SpecsSystem Spec
.

08 Dec 2013   #4
Brink

64-bit Windows 10 Pro
 
 

Yep, you could move on to the next item listed in the blue Note box, then test SFC again, and so on....
My System SpecsSystem Spec
08 Dec 2013   #5
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

Just a though.
When sfc /scannow finds problems and can't fix them a reboot and then running sfc /scannow now again might help.
Have you been rebooting between scans?
My thinking is some things get fixed in Windows 7 when rebooting that can't be fix if you don't reboot.
My System SpecsSystem Spec
08 Dec 2013   #6
tommytinkroom

Windows 7 home premium 64bit sp1
 
 

Quote   Quote: Originally Posted by Layback Bear View Post
Just a though.
When sfc /scannow finds problems and can't fix them a reboot and then running sfc /scannow now again might help.
Have you been rebooting between scans?
My thinking is some things get fixed in Windows 7 when rebooting that can't be fix if you don't reboot.
Hi Layback Bear,

Yeah,I did a sfc /scannow 6 times and rebooted between each scan.
My System SpecsSystem Spec
08 Dec 2013   #7
tommytinkroom

Windows 7 home premium 64bit sp1
 
 

Quote   Quote: Originally Posted by Brink View Post
Yep, you could move on to the next item listed in the blue Note box, then test SFC again, and so on....
I just tried the the blue note box option (KB947821 (hotfix) but still the same.
So i'm gonna try system restore now.
I can't find my Windows 7 disc not sure if i had one when i bought the laptop.
My System SpecsSystem Spec
08 Dec 2013   #8
tommytinkroom

Windows 7 home premium 64bit sp1
 
 

Just tried system restore,i could only go back as far as Dec 6th don't know
why there was'nt any previous dates to choose from.
Any way did a system restore to Dec 6th but still no joy sfc /scannow still
saying "windows resource protection found corrupt files but was unable to fix some of them"
I don't have a Windows 7 disc,so i'm stuck at what to do next.
My System SpecsSystem Spec
08 Dec 2013   #9
Brink

64-bit Windows 10 Pro
 
 

In that case, go ahead and create a sfcdetails.txt file from OPTION THREE in the tutorial and upload it here. I'll be happy to take a look at it to see what's left that can't be repaired and if it's anything to worry about or not.
My System SpecsSystem Spec
08 Dec 2013   #10
DavidE

Multi-Boot W7_Pro_x64 W8.1_Pro_x64 W10_Pro_x64
 
 

Quote   Quote: Originally Posted by tommytinkroom View Post
I don't have a Windows 7 disc,so i'm stuck at what to do next.
Step 1 in this tutorial has the link where you can download the Win 7 ISO for your licensed version.
Clean Reinstall - Factory OEM Windows 7

It's good to have an install disc or usb flash stick on hand in case it's ever needed.
My System SpecsSystem Spec
Reply

 sfc /scannow error




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
SFC /SCANNOW Error and System Image Error
Hello everyone, Whenever I try to create a System Image, it keeps telling me an error has occurred. It tells me: "Windows Backup encountered an error when accessing the remote shared folder. (0x8078015B) Additional Information: The semaphore timeout period has expired. (0x80070079)" Also,...
General Discussion
Can anyone tell me what this error in sfc /scannow is?
2014-01-06 13:34:20, Info CSI 000000e8 Cannot repair member file "PINTLGB.IMD" of Microsoft-Windows-IME-Simplified-Chinese-Core, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35},...
Performance & Maintenance
error on sfc /scannow
i did the sfc /scannow to check for corrupt files and it stopped at %50 with a corrupt file error. When i checked the cbs.log file, it showed no error. i have run the scan 5 times but still no results. Please help i have uploaded the cbs.log file. http://i44.tinypic.com/2vm9hc9.png
Performance & Maintenance
sfc.exe /scannow error
Hello, Windows 7 x64 I'm new to SFC /scannow. I'm getting an error at 36% I've attached my log as I'm not sure what to do next. I'd love any advice you might have
Performance & Maintenance
Sfc /scannow error
When I run a SFC /SCANNOW inside CMD in Administrator mode . I get up to 14% and it errors out. Note : Running inside Windows
Performance & Maintenance
sfc /scannow error
Ok so here is my problem yet again. I am trying to install adobe Photoshop and am getting an error : exit error 6. I do not know why, as it says my operating system is not supported when it is. One of the fixes is to run sfc /scannow in an elevated command prompt. Now I have came across this...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:49.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App