Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Sfc /scannow failed at 99%. Log details included. Kindly help. Thanks!

10 Sep 2014   #21
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Good point on the slots as my Ivy is 2&4 as primary slots where one usually thinks 1&3.
Personally I do this when tracking stuff down

SLOTCLEANING

Now as for the slots to clean them usea strip of old credit card about 1/2 inch wide nip the corners off one end - preferably round them offhold apiece of thin lint free cloth over the end dab on some form of alcohol - isopropyl alcohol (what we swab the skin with before an injection) is good and GENTLY swipe along the slots.

This can also be done for the GPUslot/s and do not forget to clean the contacts on the cards / sticks either.
It is an idea toclean the contacts on the sticks / cards while you are at it but be VERY gentlewhen doing this




Attached Thumbnails
Sfc /scannow failed at 99%. Log details included. Kindly help. Thanks!-stick.png  
My System SpecsSystem Spec
.
10 Sep 2014   #22
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Your graphics are interesting - but mostly normal.
The Windows Explorer window is normal
It shows a rundll32.exe (Application, rather than Application Extension - i.e. an exe file rather than a dll file)
The Taskmgr window is also fine - mine shows no rundll32 entry either


Please download the Farbar Service Scanner from

http://www.bleepingcomputer.com/download/farbar-service-scanner/

Right-click on the saved file and select 'Run as Administrator', and tick all the options, then click on the Scan button - copy and paste the report to your response.

My System SpecsSystem Spec
11 Sep 2014   #23
Leftie

Windows 7 OEM Home Premium 64bit (SP1)
 
 

Code:
Farbar Service Scanner Version: 21-07-2014
Ran by Nicholas (administrator) on 12-09-2014 at 02:42:10
Running from "C:\Users\Nicholas\Downloads"
Microsoft Windows 7 Home Premium  Service Pack 1 (X64)
Boot Mode: Normal
****************************************************************

Internet Services:
============

Connection Status:
==============
Localhost is accessible.
LAN connected.
Google IP is accessible.
Google.com is accessible.
Yahoo.com is accessible.


Windows Firewall:
=============

Firewall Disabled Policy: 
==================


System Restore:
============

System Restore Disabled Policy: 
========================


Action Center:
============


Windows Update:
============

Windows Autoupdate Disabled Policy: 
============================


Windows Defender:
==============
WinDefend Service is not running. Checking service configuration:
The start type of WinDefend service is set to Demand. The default start type is Auto.
The ImagePath of WinDefend service is OK.
The ServiceDll of WinDefend service is OK.


Windows Defender Disabled Policy: 
==========================
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Defender]
"DisableAntiSpyware"=DWORD:1


Other Services:
==============


File Check:
========
C:\Windows\System32\nsisvc.dll => File is digitally signed
C:\Windows\System32\drivers\nsiproxy.sys => File is digitally signed
C:\Windows\System32\dhcpcore.dll => File is digitally signed
C:\Windows\System32\drivers\afd.sys => File is digitally signed
C:\Windows\System32\drivers\tdx.sys => File is digitally signed
C:\Windows\System32\Drivers\tcpip.sys => File is digitally signed
C:\Windows\System32\dnsrslvr.dll => File is digitally signed
C:\Windows\System32\mpssvc.dll => File is digitally signed
C:\Windows\System32\bfe.dll => File is digitally signed
C:\Windows\System32\drivers\mpsdrv.sys => File is digitally signed
C:\Windows\System32\SDRSVC.dll => File is digitally signed
C:\Windows\System32\vssvc.exe => File is digitally signed
C:\Windows\System32\wscsvc.dll => File is digitally signed
C:\Windows\System32\wbem\WMIsvc.dll => File is digitally signed
C:\Windows\System32\wuaueng.dll => File is digitally signed
C:\Windows\System32\qmgr.dll => File is digitally signed
C:\Windows\System32\es.dll => File is digitally signed
C:\Windows\System32\cryptsvc.dll => File is digitally signed
C:\Program Files\Windows Defender\MpSvc.dll => File is digitally signed
C:\Windows\System32\ipnathlp.dll => File is digitally signed
C:\Windows\System32\iphlpsvc.dll => File is digitally signed
C:\Windows\System32\svchost.exe => File is digitally signed
C:\Windows\System32\rpcss.dll => File is digitally signed


**** End of log ****
Hey NoelDP
Here's the log from FARBAR.

Its a relief to know that the rundll32 stuff is normal.

Not sure if this helps, but sometimes when im using my com, the ELCB trips due to lightning storms and the whole com just shuts down

About 2+ years back, i had to RMA 1 of the 2gb ram as it was faulty(memtest instantly detected) and was causing intermitten BSoD while i running the com.
After the RMA and new ram slotted in, everything was back to normal.

Wonder if it might cause the registry to be corrupted
My System SpecsSystem Spec
.

11 Sep 2014   #24
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

FarBar looks normal to me.
Certainly, it's a possibility that a RAM problem would lead to strange results later in the life of the OS - but I would have hoped that SFC and/or CheckSUR could have isolated them.
Neither tool is infallible, though - and there's a good chance that your problem is a result of corruption from a long time ago.

I'm thinking in terms of a repair install here, given that history. It would certainly be quicker than attempting to chase down specific errors.
My System SpecsSystem Spec
12 Sep 2014   #25
Leftie

Windows 7 OEM Home Premium 64bit (SP1)
 
 

Hi Noel
I guess you are right on the repair install.

Before i take the plunge on the repair install, im hoping to have 1 last shot

Right now im just hoping its not a deep-rootkit infection and the corruption is caused by "improper" shutdown of the computer due to lightning storms and BSoD from a few yrs back

1)Anyway i did some trawling through the processes. - I found out i ran SURT(KB947821) from my download folder(C:-->Users-->Downloads) instead of the desktop.
(wondering if this will affect the outcome, so will dl and save on desktop and re-run SURT again.
Should i run it in Safe or Normal mode? )

2)Found some weird naming folders and will be submitting them to virustotal/jotti for verification.
Eurekalog - (AppData-->Roaming)

Would it be of any help to dl and run hijackthis from trendmicro?

Thanks for sticking by.
Cheers!
My System SpecsSystem Spec
13 Sep 2014   #26
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

HJT doesn't really work any more - and is extremely misleading in a x64 installation as it doesn't understand the 64-bit file structure.
You could try running TDSSKiller instead, which is far simpler.
SURT doesn't care where it runs from - it creates folders for itself in the partition with the largest available space when running, then (hopefully) deletes them when complete.
I've never seen any difference between running in Normal and Safe modes.
My System SpecsSystem Spec
13 Sep 2014   #27
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Well I reckon a quick run of these would do no harm and even if only to eliminate stuff these might pick up



http://www.superantispyware.com/

http://www.malwarebytes.org/products/malwarebytes_free/

http://www.bleepingcomputer.com/download/adwcleaner/

download from bleeping computer delete any rubbishthese find.

One other you can try is this one (I only ever use the Emergency and Command line scans)
Emsisoft Free Emergency Kit: Portable malware scanner | Free removal of Viruses, Bots, Spyware, Keyloggers and Trojans
My System SpecsSystem Spec
13 Sep 2014   #28
Leftie

Windows 7 OEM Home Premium 64bit (SP1)
 
 

@NoelDP & ICit2lol,

Thanks for the heads up on HJT on the 64x installation!! (1 less pgm to install in com)

Will give TDSS, adwcleaner a run, thereafter followed by SURT again.
I'll update and see how it goes from there.

Once again, Thanks!
My System SpecsSystem Spec
13 Sep 2014   #29
Leftie

Windows 7 OEM Home Premium 64bit (SP1)
 
 

ADWCleaner

Have found some stuffs but i didnt clean/quarantine them as i didnt want to mess about with the registry

Seems like false positives? but not too sure about those with "search hook".
Anyway, from the looks of it, im guessing nothing too serious right?
My com/pgms is still working good, net surfing is fast; without any re-directs/popups.




Im leaning to the side the corruption is not caused by malware but by "not shutting down properly"
Have ran both TDSS and AdwCleaner in safe mode followed by SURT in (normal mode).
Attached are the logs.
Is the CBS readings any better than before?
My System SpecsSystem Spec
13 Sep 2014   #30
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

I need to have a look at your COMPONENTS registry hive

Please copy the C:\Windows\System32\config\COMPONENTS file (no extension) to your desktop and then compress it - upload the compressed file to your favoured fileshare site (preferably Dropbox or OneDrive) and post a link.
My System SpecsSystem Spec
Reply

 Sfc /scannow failed at 99%. Log details included. Kindly help. Thanks!




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD after 10-15mins of downloading a torrent, more details included.
I've been trying to download some files using uTorrent, but after 10-15mins of download i get a BSOD, so i searched on the internet how to get rid of it and found this thread by z3r010... followed his instructions, and well here i am... Using Blue Screen View, i managed to see some information...
BSOD Help and Support
SFC scannow cannot repair, need help on manual fix details
Short version: Built my new rig 9 months ago, fresh equipment, new copy of Win7 (Pro). Recently my computer wouldn't start up, it kept going into a BSoD loop. It would flash the BiOS screen, pause with cursor jumps, then show the low res Windows load screen with the bar scrolling blue bars instead...
Performance & Maintenance
BSOD (usually when playing media) SFC details included
I've recently started getting BSOD's and though I might've figured it out on my own, I'm not sure so I'm coming here for help... According to the sfc I'm hoping it's just a corrupt mcepg.dll, but it also says other things about my processor or something. Any help?
BSOD Help and Support
Failed to update 800b0100 Log included
================================= Checking System Update Readiness. Binary Version 6.1.7601.21645 Package Version 19.0 2013-08-10 14:49 Checking Windows Servicing Packages Checking Package Manifests and Catalogs (f) CBS MUM...
Windows Updates & Activation
Multiple issues after update (sfc /scannow and CheckSUR logs included)
Hi everyone, I'm currently using Windows 7 Home Edition, 64bit. Back on 3/14 Windows installed some updates, and since then my computer has been acting strange. The updates that installed successfully were as follows: KB915597 (Defender Update For Windows Explorer) KB2553501 (Sec Update...
Windows Updates & Activation
Windows 7 .NET Framework SP1 (Failed) Please Help! Logs Included
Hi guys, I turned on my computer and at startup I get a message from Catalyst Control Center that saids: "could not load file or assembly 'sorttbls.nlp' or one of it dependencies. the system cannot find the specified file" I believe that this is due to a missing or corrupt .NET...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:41.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App