Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Screen saver won't operate - possible USB issue


25 Feb 2014   #1

Windows 7 x64
 
 
Screen saver won't operate - possible USB issue

My problem is that my screen saver will not operate at all, no matter what settings I use. It does work when I use the 'preview' function though.

I am running Windows 7 x64. It's updated to the fullest extent via Windows Update. My mobo is a Gigabyte X79-UD3 running F16 Bios, the latest version.

My screen saver is set to blank screen after 1 minute (just for testing, it's normally set to 10 minutes) and used to work perfectly in the past. I can't honestly remember when it stopped working as I am usually at the computer, so have no need of it. All my displays are set to turn off after 30 minutes (three Dell U2413 24" WS monitors), my computer is set to never sleep and hard drive set to never turn off (Kingston SSD as C: drive). Allow wake timers set to disabled. USB selective suspend setting set to disabled.

I am using a Wireless Logitech G700s mouse and wired Logitech G19 keyboard. I mention this as my research has said that this could be the cause. However, I have removed and uninstalled the keyboard and mouse and this hasn't rectified my problem. I am using hte latest drivers for both, downloaded and installed from the manufacturers website today.

My Powercfg /energy report highlighted the issue for me I think and I list them below. My problem is that I have no idea how to fix these errors, so any help would be really gratefully received please.

For reference, my Device Manager is saying that I have three Generic USB Hubs, four USB Composite Devices, one USB Mass Storage Device and two USB Root Hubs, all seemingly not entering 'suspend state.'

I've tried various other things over the last month or so since I noticed this issue but I can't honestly remember what they are. Please respond if you have nay ideas and I can reply with the results.

USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name USB Composite Device Host Controller ID PCI\VEN_8086&DEV_1D2D Host Controller Location PCI bus 0, device 26, function 0 Device ID USB\VID_046D&PID_C531 Port Path 1,5,3




USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name USB Root Hub Host Controller ID PCI\VEN_8086&DEV_1D2D Host Controller Location PCI bus 0, device 26, function 0 Device ID USB\VID_8086&PID_1D2D Port Path




USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name USB Root Hub Host Controller ID PCI\VEN_8086&DEV_1D26 Host Controller Location PCI bus 0, device 29, function 0 Device ID USB\VID_8086&PID_1D26 Port Path




USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name USB Composite Device Host Controller ID PCI\VEN_8086&DEV_1D2D Host Controller Location PCI bus 0, device 26, function 0 Device ID USB\VID_046D&PID_C228 Port Path 1,5,1



USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name Generic USB Hub Host Controller ID PCI\VEN_8086&DEV_1D2D Host Controller Location PCI bus 0, device 26, function 0 Device ID USB\VID_8087&PID_0024 Port Path 1



USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name Generic USB Hub Host Controller ID PCI\VEN_8086&DEV_1D26 Host Controller Location PCI bus 0, device 29, function 0 Device ID USB\VID_8087&PID_0024 Port Path 1



USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name Generic USB Hub Host Controller ID PCI\VEN_8086&DEV_1D2D Host Controller Location PCI bus 0, device 26, function 0 Device ID USB\VID_05E3&PID_0607 Port Path 1,5



USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name USB Composite Device Host Controller ID PCI\VEN_8086&DEV_1D2D Host Controller Location PCI bus 0, device 26, function 0 Device ID USB\VID_046D&PID_C07C Port Path 1,6



USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name USB Mass Storage Device Host Controller ID PCI\VEN_8086&DEV_1D26 Host Controller Location PCI bus 0, device 29, function 0 Device ID USB\VID_040D&PID_6205 Port Path 1,1



USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name USB Composite Device Host Controller ID PCI\VEN_8086&DEV_1D2D Host Controller Location PCI bus 0, device 26, function 0 Device ID USB\VID_046D&PID_C229 Port Path 1,5,2

My System SpecsSystem Spec
.

25 Feb 2014   #2

Windows 7 ultimate 64-bit
 
 

Have you tried going into the system folder in the control panel and then into device manager and looking under power management for each usb hub to see if the "allow windows/computer to turn this device off to save energy" or something like that box is checked? That may not be the exact wording; but; have you checked to see if that box is checked? Cause if it is; windows is probably turning power to the associated usb hub(s) off; which may be what in turn is causing the issue. Try checking that to see if that resolves the issue. Take a look at the image I have uploaded and it will show the box i am talking about.


Attached Thumbnails
Screen saver won't operate - possible USB issue-forums.png  
My System SpecsSystem Spec
25 Feb 2014   #3

Windows 7 x64
 
 

Thanks for responding mate.

Currently all those checkboxes are unticked (although the power management options aren't there for USB Composite device or USB Mass storage device). I've variously tried them all and separately ticked and unticked too, to no avail.
My System SpecsSystem Spec
.


25 Feb 2014   #4

Windows 7 ultimate 64-bit
 
 

Well if they arent there for the usb storage device(s); i would just do a uninstall of the root hubs; reboot and then let windows re-detect the hubs. IF that doesnt do it; then its possible there could be some sort of hardware issue.
My System SpecsSystem Spec
25 Feb 2014   #5

Windows 7 x64
 
 

Thanks. I've just done that and rebooted. The computer found the various USB items and reinstalled the drivers for them. No change on the screen saver still not activating though.
My System SpecsSystem Spec
18 Mar 2014   #6

Windows 7 x64
 
 

If anyone else has any ideas, i'd be very grateful please. I keep trying a few things but I just can't get the screen saver to work.
My System SpecsSystem Spec
25 Mar 2014   #7

Windows 7 x64
 
 

Oh well. this is the last bump then I shall let the thread die. Please, if anyone else has any other suggestions based on my OP, I would be very grateful.
My System SpecsSystem Spec
Reply

 Screen saver won't operate - possible USB issue




Thread Tools



Similar help and support threads for2: Screen saver won't operate - possible USB issue
Thread Forum
Blue Screen Problem every time i open my PC! Cannot operate for long. BSOD Help and Support
Screen Saver, I want to start the Screen Saver Manually. Customization
Windows Live Photo Gallery Screen Saver Changes Screen Resolution General Discussion
Screen saver for Windows 7 issue solved General Discussion
Screen saver issue - two displays Customization

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:24 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33