Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Both sfc/startup repair cannot fix corruption - credui.dll

09 Mar 2014   #11
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Here's everything but the VC++ 2005 files....


I've uploaded a file - 828aa.zip - to my OneDrive at Noel's OneDrive
Please download and save it.

Right-click on the saved file and select Extract all...
Change the target to C:\ and click on Extract
Close all windows (it would be a good idea to print these instructions!)

Now reboot to the Repair Environment - as soon as the machine restarts, start tapping F8 - this should bring up the Advanced Boot Menu, at the top of which should be the option 'Repair my Computer'
Pick that
You'll have to log in with your username and password.

Pick the option to use a Command Prompt
At the prompt type
DIR C:\828aa
hit the enter key - if you get a 'Not Found' error try
DIR D:\828aa
or
DIR E:\828aa



The drive letter in use when you find the folder will need to be substituted (for<drive>) into the following command...



XCOPY <drive>:\828aa <drive>:\windows\winsxs /y /i /s /v /h



(e.g. XCOPY P:\wfire P:\windows\winsxs /y /i /s /v /h )



run the command (it should take almost no time) and when the prompt returns, type
EXIT
and hit the Enter key to exit Command Prompt - reboot to Normal Mode Windows.

Now run SFC /SCANNOW in an Elevated Command Prompt
then reboot and upload the new CBS.log file to your reply


My System SpecsSystem Spec
.
09 Mar 2014   #12
Matrix828

Windows 7 Ultimate x64
 
 

I have done as you have said; logs attached.


Attached Files
File Type: txt sfcdetails.txt (331.3 KB, 2 views)
My System SpecsSystem Spec
09 Mar 2014   #13
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

I seem to have missed one file - apart from the manifests we know about.
I'll deal with that one tomorrow...
Code:
2014-03-10 00:10:44, Info                  CSI    00000331 [SR] Repairing 6 components
2014-03-10 00:10:44, Info                  CSI    00000332 [SR] Beginning Verify and Repair transaction
2014-03-10 00:10:44, Info                  CSI    00000333 [SR] Cannot repair member file [l:50{25}]"Windows Critical Stop.wav" of Microsoft-Windows-Shell-Sounds, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
2014-03-10 00:10:44, Info                  CSI    00000334 [SR] Cannot verify component files for Microsoft.VC80.MFCLOC, Version = 8.0.50727.4027, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10{5}]"win32", TypeName neutral, PublicKey neutral, manifest is damaged (FALSE)
2014-03-10 00:10:44, Info                  CSI    00000335 [SR] Cannot verify component files for Microsoft.VC80.MFC, Version = 8.0.50727.4027, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10{5}]"win32", TypeName neutral, PublicKey neutral, manifest is damaged (FALSE)
My System SpecsSystem Spec
.

10 Mar 2014   #14
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Still hunting for the VC files

Lets get the final one of the others sorted...


I've uploaded a file - 828ab.zip - to my OneDrive at Noel's OneDrive
Please download and save it.

Right-click on the saved file and select Extract all...
Change the target to C:\ and click on Extract
Close all windows (it would be a good idea to print these instructions!)

Now reboot to the Repair Environment - as soon as the machine restarts, start tapping F8 - this should bring up the Advanced Boot Menu, at the top of which should be the option 'Repair my Computer'
Pick that
You'll have to log in with your username and password.

Pick the option to use a Command Prompt
At the prompt type
DIR C:\828ab
hit the enter key - if you get a 'Not Found' error try
DIR D:\828ab
or
DIR E:\828ab



The drive letter in use when you find the folder will need to be substituted (for<drive>) into the following command...



XCOPY <drive>:\828ab <drive>:\windows\winsxs /y /i /s /v /h



(e.g. XCOPY P:\wfire P:\windows\winsxs /y /i /s /v /h )



run the command (it should take almost no time) and when the prompt returns, type
EXIT
and hit the Enter key to exit Command Prompt - reboot to Normal Mode Windows.

Now run SFC /SCANNOW in an Elevated Command Prompt
then reboot and upload the new CBS.log file to your reply
My System SpecsSystem Spec
10 Mar 2014   #15
Matrix828

Windows 7 Ultimate x64
 
 

Since my last post (and reboot) I finally have access to chrome without using "old_chrome.exe", and whocrashed opens without error! You people here are brilliant, thank you so much for the help!!

I have attached the new sfcdetails.txt, lets hope there aren't many more files to replace now.

I am also getting a new error - "wermgr.exe Application Error" - I have googled it and people said to either disable the Windows Error Reporting service or just delete the file from system32. Should I attempt to pull a working one from an installation disc and replace it?

A thousand thanks to you, Noel


Attached Files
File Type: txt sfcdetails.txt (373.3 KB, 1 views)
My System SpecsSystem Spec
10 Mar 2014   #16
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Just the two VC++ files to deal with now - I have a team hunting for them

We've got the source update - but it's a case of knowing the proper procedures for extraction and renaming - which I don't. If I have to, I'll create a new machine to install the update into and then pull the files from that (but that's going to mean about 5 hours work!)

Back when I've found the files....

Here's the summary output from your last scan..
Code:
2014-03-10 17:25:11, Info                  CSI    00000326 [SR] Repairing 3 components
2014-03-10 17:25:11, Info                  CSI    00000327 [SR] Beginning Verify and Repair transaction
2014-03-10 17:25:11, Info                  CSI    00000328 [SR] Cannot verify component files for Microsoft.VC80.MFCLOC, Version = 8.0.50727.4027, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10{5}]"win32", TypeName neutral, PublicKey neutral, manifest is damaged (FALSE)
2014-03-10 17:25:11, Info                  CSI    00000329 [SR] Cannot verify component files for Microsoft.VC80.MFC, Version = 8.0.50727.4027, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10{5}]"win32", TypeName neutral, PublicKey neutral, manifest is damaged (FALSE)
2014-03-10 17:25:11, Info                  CSI    0000032a [SR] Repairing corrupted file [ml:520{260},l:40{20}]"\??\C:\Windows\Media"\[l:50{25}]"Windows Critical Stop.wav" from store
2014-03-10 17:25:11, Info                  CSI    0000032c [SR] Repair complete
My System SpecsSystem Spec
10 Mar 2014   #17
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

With luck this will work


I've uploaded a file - 828ac.zip - to my OneDrive at Noel's OneDrive
Please download and save it.
Right-click on the downloaded file, and select Extract all…
Extract to the default location - which will create a new folder 828ac in the same place.
Open this folder - there should be one folder inside it (Manifests,)

Copy the content of the manifests folder (.manifest files) into this folder:

C:\Windows\Temp\CheckSur\Winsxs\Manifests

Now run the CheckSUR tool again (it may take a while)

Post the new CheckSUR.log file, and the CheckSUR.persist.log file.
My System SpecsSystem Spec
11 Mar 2014   #18
Matrix828

Windows 7 Ultimate x64
 
 

Here you go, Noel.


Attached Files
File Type: zip Logs.zip (2.6 KB, 1 views)
My System SpecsSystem Spec
11 Mar 2014   #19
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

OUCH!
looks like I may have goofed with those two files

They seem either to be wrong, or to have highlighted other problems...

Here's the edited highlights of the CheckSUR log

Code:
Checking Component Store
(f) CSI Manifest Missing 0x00000002 x86_microsoft.vc80.mfc_1fc8b3b9a1e18e3b_8.0.50727.4027_none_cbeeb6564710a1d1.manifest x86_microsoft.vc80.mfc_1fc8b3b9a1e18e3b_8.0.50727.4027_none_cbeeb6564710a1d1 
(w) CSI Located Replacement: Invalid (S256H) 0x00000000 Temp\CheckSUR\winsxs\Manifests\x86_microsoft.vc80.mfc_1fc8b3b9a1e18e3b_8.0.50727.4027_none_cbeeb6564710a1d1.manifest x86_microsoft.vc80.mfc_1fc8b3b9a1e18e3b_8.0.50727.4027_none_cbeeb6564710a1d1 
(f) CSI Manifest Missing 0x00000002 x86_microsoft.vc80.mfcloc_1fc8b3b9a1e18e3b_8.0.50727.4027_none_03c6f934205fcb15.manifest x86_microsoft.vc80.mfcloc_1fc8b3b9a1e18e3b_8.0.50727.4027_none_03c6f934205fcb15 
(w) CSI Located Replacement: Invalid (S256H) 0x00000000 Temp\CheckSUR\winsxs\Manifests\x86_microsoft.vc80.mfcloc_1fc8b3b9a1e18e3b_8.0.50727.4027_none_03c6f934205fcb15.manifest x86_microsoft.vc80.mfcloc_1fc8b3b9a1e18e3b_8.0.50727.4027_none_03c6f934205fcb15 
(f) CSI Payload File Missing 0x00000000 mshtmler.dll amd64_microsoft-windows-ie-htmleditingsupport_31bf3856ad364e35_8.0.7600.16385_none_6a1cbf5f4ad99b65 
(f) CSI Payload File Missing 0x00000000 VGX.dll x86_microsoft-windows-ie-vgx_31bf3856ad364e35_9.4.8112.20593_none_05f6a2141c55df06 
 
Unavailable repair files:
 winsxs\manifests\x86_microsoft.vc80.mfc_1fc8b3b9a1e18e3b_8.0.50727.4027_none_cbeeb6564710a1d1.manifest
 winsxs\manifests\x86_microsoft.vc80.mfcloc_1fc8b3b9a1e18e3b_8.0.50727.4027_none_03c6f934205fcb15.manifest
This means that either I got the files wrong, or you have other problems as well.
In view of the difficulties with VC files in general, I think that the problem lies with me.

I'll have to review and come back to you.
My System SpecsSystem Spec
16 Mar 2014   #20
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

I *think* I may have the source of the problem - an excess line-feed!

I'll upload new copies of the files in a few minutes
My System SpecsSystem Spec
Reply

 Both sfc/startup repair cannot fix corruption - credui.dll




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows 7 crashes on startup. Can't restore, repair or repair install
All of a sudden, my computer crashes every time when starting up the computer. When it gets to the "Windows" screen with the small moving dots that form the windows logo, it crashes just as they start their animation. I've tried using Startup Repair, as well as command line repair (possibly the...
General Discussion
Startup Repair to infinite reboot loops, Repair errors 0x5 & 0x490
Firstly, thanks for reading. My PC runs Windows 7 x64. I built it myself about a year ago for gaming. Occasionally running games I would BSOD and it would suck. I'd update all my drivers or try some game-specific fix and usually if I didn't fix it, I would just start playing something else...
General Discussion
BSOD at startup (only?), (Memory Corruption)
Hello! I get BSOD upon startup. But not everytime I start the PC. It's like once a day, and often when I start the PC for the first time in the morning. I hope some of you guys can give me some help. The only thing I catched from the dump file was something about a memory corruption... Thanks...
BSOD Help and Support
BSOD upon initial startup, memory corruption
Hello, I just made a new computer last week and I have been getting BSODs when I first start up my computer. After the BSOD, the computer restarts and acts as normal. I believe it may have to do with me having my window files on an SSD while my users files on an HDD. I did this separation...
BSOD Help and Support
BSOD, Startup Repair, System Repair and other errors on nearlly new PC
I took delivery of a new (and expensive!) PC in January but last week it started giving me constant and varied errors. The isssues range from Blue screen, black screen, failing to load windows, startup repair needed often, system restore needed often, and when it does load windows there are...
BSOD Help and Support
Startup repair loop - Can't repair with system restore/repair/commands
Hello, I've been unable to access my custom build computer since around 5:00 yesterday. I chose to restart my computer at around that time just because it was slowing up a little and I usually do that to help, I had not installed any updates or new programs since 2 days ago when there had been a...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:09.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App