|10 Jan 2015||#84|
It happens, no problem.
I took a quick look at the event logs. I'm going to say that combing through event logs looking for performance tuning is more work than I am willing to commit to doing. I asked for the data because it was the easiest way to answer your question about the Error events you're seeing.
Here's what I cherry picked from the information you posted:
Make sure you have sufficient disk space to operate your machine.
Log Name: SystemWithout further research, I'm not certain about this, but the description lends itself to performance. It's probably normal throttling but it's an area you can look at to see what's causing it to throttle back. It is not a serious condition.
Log Name: SystemThese both relate to Western Digital and should be researched. If you don't use the WD backup service - disable it in Services or the Services tab in MSconfig. If you do use the WD backup services, fix the configuration. The rules are wrong or you didn't tell it where to backup the data.
Log Name: SystemAgain, this points to disk space, specifically your paging file (virtual memory)
Log Name: SystemI recall reading something like this "Mbam missing file" but you'll have to dig deeper. See if Malwarebytes forum has anything on this
Log Name: System
That's about it.
Conclusion: I believe the many errors you see in the Event log revolve around disk space and also this event
Description: The WD Backup service depends on the WD Rules service which failed to start because of the following error:There are tens if not hundreds of the WD Rules events. If you have disabled that service, re-enable it. The old events remain in the log, but new ones won't be generated.
It is tedious work, but if you're looking to get those few milliseconds, you have to do the heavy lifting.
Sorry this wasn't a "here ya go, these things will help you" post.
It's more an answer to your query re: Error level event logs and a "point you in the right direction" post.
|My System Specs|
|11 Jan 2015||#85|
Thanks for the detailed answers. I have a few followup questions:
"Again, this points to disk space, specifically your paging file (virtual memory)"
* Should increase virtual memory? right now its set on system managed, which is auto set by windows to 8GB and the system recommendation shows 12GB ... strange but anyway should set it to manual and set virtual memory to 12GB+?
"Mbam missing file"
* removed malware bytes while testing system a few days back ... so any idea why is it still interfering with system?
"The speed of processor 0 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 28 seconds since the last report."
* I don't understand this ... can you elaborate?
|My System Specs|
|11 Jan 2015||#86|
Letting Windows manage the page file is easiest - more is not always better in this case. Too much causes page thrashing too little causes more page faults.
My rule of thumb is: if you manually set the page file size, set a static value equal to the physical memory only on the System drive
4 GB RAM, page file 4096-4096
8 GB RAM, page file 8192-8192
I'm not sure it is interfering, that's the thing about event logs - this could be an old log entry that came from when you removed Malwarebytes. Logs only tell you so much, the rest is knowing what you've done (uninstalling Mbam) and a bit of hard digging.
I thought I did - the system throttles back under certain circumstances. What those circumstances are is hard to determine without elaborate forensics. The best I can offer is to make note of the event and if it occurs too many times, then investigate more. Otherwise, it's a normal event with little impact - I just noted it when I looked at the events and thought I'd point it out.
If you want to try and analyze the events it's easier to start with a clean slate.
Event Viewer: Clear All Events
This is not something you want to run regularly, since you might lose an entry that might help future troubleshooting. I might clear my event logs once a year when my machine has been and is running smooth. Never when I'm having trouble with the machine.
Don't over reach when looking at the events - some are alarming but really aren't any concern.
Take the 'error' event wmi 10 - it's not an error at all and you can stop it from being reported
Event ID 10 is logged in the Application log after you install Service Pack 1 for Windows 7 or Windows Server 2008 R2
The rest of event analysis is up to you to research and work though. I don't bother much unless I have real issue on my machine and it's usually an after thought "Hey, I should have looked at the event logs". But it's really only a troubleshooting tool.
As a lot of members have already said, your machine is performing well. Don't look for things to fix when there aren't any real issues.
Good luck and have 'fun' with events. It's a good way to learn but it can be frustrating.
The 'more information' on the event itself might take you to a page that describe the event - or you can Google the event or error (wmi 10 for example) to learn more.
The rest I leave as an exercise for the student.
|My System Specs|
|Thread Tools||Search this Thread|
|Similar help and support threads|
BSOD 0x00000116, sometimes horizontal white lines on rebot
Good evening all, I've been troubleshooting this for months... This BSOD has been mostly random, but can be more often reproduced during act transitions in Diablo III, although it seems to have thrown it less often recently. Sometimes it can happen after browsing in chrome or watching videos...
|BSOD Help and Support|
My wallpaper is huge, and it was not before?
I have no idea why my wallpaper is so huge now. It worked fine before (perfect size.) How can I fix this?
Hey, i've got a pretty big problem. i wanted to replace shell32.dll file, but it didn't let me, so i changed some premission settings and now i can't get access to my local drive C: . i found some fixes, but i can't download them either because of no access or because UAC. i can't change UAC and...
Huge problem. help please ::)
Hello everyone. First off I'd like to say that english is not my first language so I might make some grammar or vocabular mistakes. Okay. I have an Hp pavilion 7. Amd dual core processor 2.4 ghz. It's not the best computer ever but it worked well until this morning. I turned it on, it went on...
|BSOD Help and Support|
Can't get rid of xp temporary copied files after rebot
Hi, I have windows 7 on my HP desktop and i needed windows xp for a certain program for school so i created a partition of 40 GB and formatted it as NTFS... I booted the installation disk and it was loading setup and it said the thier is no disk drive or partitions so i booted 7 back up and...
|Installation & Setup|
A huge problem and need help.
Hello everyone. I'm new to this forum and this is my first post and I'm gonna post about my laptop problem. It all started (I don't remember when but it's this year) when the screen suddenly, I don't know how to describe it but it went crazy and then just freezes as I tried moving the pointer but...
© Designer Media Ltd
All times are GMT -5. The time now is 09:21.