Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Reliability monitor does not work any more since 22.04.15

09 May 2015   #1
LennMann

Windows 7 ultimate x64
 
 
Reliability monitor does not work any more since 22.04.15

I have Windows 7 Ultimate x64 installed on my self built PC. A month ago I did a clean reinstall due to BSOD's since then no more BSOD's but the reliability monitor stopped working on the 22.04.15, and I can't find out how to get it going again I have gone through all the systems settings and admin tools but no joy. Can anybody tell me how PLEASE Error reporting is on etc.


My System SpecsSystem Spec
.
09 May 2015   #2
Brink

64-bit Windows 10 Pro
 
 

Hello Lenn, and welcome to Seven Forums.

You might see if resetting Reliability Monitor may help to get it working again.

Reliability Monitor - Reset
My System SpecsSystem Spec
09 May 2015   #3
LennMann

Windows 7 ultimate x64
 
 

Sorry Brink IT DID IN FACT FIX IT all seems fine I will just to wait until to Tomorrow to see if it collects data. Thank you very much......lennmann
My System SpecsSystem Spec
.

09 May 2015   #4
Brink

64-bit Windows 10 Pro
 
 

Great news. Please let us know how it went.
My System SpecsSystem Spec
10 May 2015   #5
LennMann

Windows 7 ultimate x64
 
 

So far it is still blank but the notice says that it will take a while til enough data is gathered to rate the performance. It is still less than 24 hours since I reset it,but I will keep you posted as to how it goes....Best Regards....LENNMANN
My System SpecsSystem Spec
15 May 2015   #6
LennMann

Windows 7 ultimate x64
 
 

Hi brink,
Still no joy with reliability monitor I have gone through Admin Tools-Services and checked all that I could find to do with performance or error monitoring are started and started those that were not. Altered one to do with fault monitoring from manual to automatic so far nix.
best regards..Len Mann
My System SpecsSystem Spec
15 May 2015   #7
Brink

64-bit Windows 10 Pro
 
 

I'm sorry to hear that. It will then usually take a repair install or clean install to fix it.
My System SpecsSystem Spec
16 May 2015   #8
LennMann

Windows 7 ultimate x64
 
 

Hi Brink, I'm sorry too as I only did clean install about a month ago because of too many BSODs. The clean install took care of them almost completely except the Elton USB3 driver with my motherboard was old and windows didn't like it. But Windows update fixed that so after a reg clean then a sfc scan all seemed ok until reliability monitor stopped working. Its a b...... a clean Windows install is quick and easy but its all the other programs that have to be re installed and reactivated that takes a lot of time but thank you for your help it could and should have worked.
All the Very Best LenM... PS I will try the repair install first and hope works
My System SpecsSystem Spec
19 May 2015   #9
LennMann

Windows 7 ultimate x64
 
 

Hi Brink, did a repair install and it still did not work but I found out you must turn on reliability monitor before it will work after a reset or repair install. From Control Panal-Adim Tools-Task Scheduler-Microsoft-RAC- and enable RACTask as it will be left as disabled after a reset et al then hope like hell it works, but confidence never hurts. In any case I wont give up till I get the Bas....... of a thing going. I WILL LET YOU KNOW IF DOES WORK IT MAY help others

ALL the Very Best......LenM
My System SpecsSystem Spec
19 May 2015   #10
Brink

64-bit Windows 10 Pro
 
 

Fingers crossed to avoid a clean install.
My System SpecsSystem Spec
Reply

 Reliability monitor does not work any more since 22.04.15




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Reliability Monitor
i have just realized that the Reliability Monitor has stopped updating on my machine i have looked at the settings but it looks ok what is the best way to reset it and get it up and running again?
Performance & Maintenance
Reliability Monitor
View Reliability and Problem History with Reliability Monitor in Windows 7 and Windows 8 This tutorial will show you how to open and use Reliability Monitor to review reliability and problem history to help resolve issues in Windows 7 and Windows 8. Reliability Monitor is an advanced tool...
Tutorials
SSDs and Reliability Monitor
I think it may be better to ask this question here. I recently upgraded the firmware (as reqd) on the Crucial M4 128GB and it went fine. Transferred the OS using Paragon Migrate OS to SSD. It also was straightforward. Except: My Reliability Monitor doesn't appear to update. I know one of the SSD...
Performance & Maintenance
Reliability Monitor Shortcut
How to Create a "Reliability Monitor" Shortcut in Windows 7 and Windows 8 This will allow you to download a Reliability Monitor shortcut that will open Reliability Monitor directly instead of having to go through the Action Center in Windows 7 and Windows 8. EXAMPLE: Reliability Monitor To...
Tutorials
Reliability Monitor
The Reliability Monitor of Windows 7 is a very handy tool for monitoring the history of when which applications have failed. Being a developer, it is to be expected that applications that are "In-Development" will cause problems, which in turn negativly affects the scores of the Windows...
Performance & Maintenance
I've just tried resetting reliability monitor but?
Its not working for me,ive followed the tutorial here to a T twice and both times it does seem to work then a while later all the old history is back,and yep thats after deleting inside them folders etc? Am i missing something here?
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:39.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App