Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: unable to run chkdsk, corrupt

29 May 2015   #1
blindman

Windows 7 Ultimate x64 sp1
 
 
unable to run chkdsk, corrupt

Hi
have a laptop running win7 x86 ultimate, been playing up a bit and am trying to run chkdsk but it just won't. have a log file from an sfc scannow, but unsure how to deal with what it says.
any help would be appreciated please?




Attached Files
File Type: txt sfcdetails.txt (34.5 KB, 6 views)
My System SpecsSystem Spec
.
29 May 2015   #2
GokAy

Windows 7 Ultimate x64 SP1
 
 

Hey, there is a known issue with a recent Windows Update (KB3022345), it causes an irrepairable corruption warning (which is a false report, the files are not corrupt in reality). If you have this update installed then do one of the following:
- Uninstall this update (it is Windows 10 preparation update) or
- Run the fix from The Tech Cookbook – Windows 7 update (KB3022345) causing corrupt files

After the above, run another SFC /scannow. If you still get a corruption, attach it in your next post.
My System SpecsSystem Spec
29 May 2015   #3
blindman

Windows 7 Ultimate x64 sp1
 
 

GokAy
thanks for reply, have been working on this since original post, have found this update, uninstalled and fixed via the link you posted. still having troubles, have full cbs log file from latest sfc /scannow
any help here would be great as i'm starting to get a bit lost, looks like autochk file may be a problem
cheers
My System SpecsSystem Spec
.

29 May 2015   #4
GokAy

Windows 7 Ultimate x64 SP1
 
 

Unfortunately I am not versed in troubleshooting these problems, hang in there while expert response comes.
My System SpecsSystem Spec
31 May 2015   #5
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

There's only the one problem in the SFC...
Code:
 Line 2208: 2015-05-29 22:32:48, Info                  CSI    000001e4 [SR] Repairing 1 components
 Line 2209: 2015-05-29 22:32:48, Info                  CSI    000001e5 [SR] Beginning Verify and Repair transaction
 Line 2212: 2015-05-29 22:32:48, Info                  CSI    000001e7 [SR] Cannot repair member file [l:22{11}]"autochk.exe" of Microsoft-Windows-Autochk, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
I'll post a fix protocol in a few minutes.
My System SpecsSystem Spec
31 May 2015   #6
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

I've uploaded a file - bdnaa.zip - to my OneDrive at Noel's OneDrive
Please download and save it.

Right-click on the saved file and select Extract all...
Change the target to C:\ and click on Extract
Close all windows (it would be a good idea to print these instructions!)

Now reboot to the Repair Environment - as soon as the machine restarts, start tapping F8 - this should bring up the Advanced Boot Menu, at the top of which should be the option 'Repair my Computer'
Pick that
You'll have to log in with your username and password.

Pick the option to use a Command Prompt
At the prompt type
DIR C:\bdnaa
hit the enter key - if you get a 'Not Found' error try
DIR D:\bdnaa
or
DIR E:\bdnaa



The drive letter in use when you find the folder will need to be substituted (for<drive>) into the following command...



XCOPY <drive>:\bdnaa <drive>:\windows\winsxs /y /i /s /v /h



(e.g. XCOPY P:\wfire P:\windows\winsxs /y /i /s /v /h )



run the command (it should take almost no time) and when the prompt returns, type
EXIT
and hit the Enter key to exit Command Prompt - reboot to Normal Mode Windows.

Now run SFC /SCANNOW in an Elevated Command Prompt
then reboot and upload the new CBS.log file to your reply
My System SpecsSystem Spec
31 May 2015   #7
blindman

Windows 7 Ultimate x64 sp1
 
 

NoelDP
really appreciate your help here
have downloaded the file and saved on to 'c' drive on laptop, hammered f8 on reboot but the menu that came up didn't have any 'repair my computer' option 3 different safe modes at top, 7 others below that with 'start windows normally' at the bottom.
don't want to do anything wrong here, can you advise please (dell D630 a19 bios revision, win7x86sp1)
thanks
My System SpecsSystem Spec
31 May 2015   #8
GokAy

Windows 7 Ultimate x64 SP1
 
 

You can boot with windows 7 repair disk.

I guess you need to install Windows with the repair option for it to show in Advanced Boot Options menu. Maybe can be installed later too, no idea.
My System SpecsSystem Spec
31 May 2015   #9
blindman

Windows 7 Ultimate x64 sp1
 
 

NoelDP
have a second D630 in the house too, have checked on that one and it does have the 'repair my pc' option, bit puzzled as to why the one that is goosed doesn't?
cheers
My System SpecsSystem Spec
31 May 2015   #10
blindman

Windows 7 Ultimate x64 sp1
 
 

GokAy
have windows install disc, there is a repair option in that, is that what you mean?
thanks
My System SpecsSystem Spec
Reply

 unable to run chkdsk, corrupt




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Corrupt message on chkdsk.
Help. This is the first time I got this message. Also, whenever I try to boot up my pc, it gives me an idle black screen and sometimes, a blue screen. I have not decompressed my disk yet.
Hardware & Devices
$Secure is corrupt and unreadable. Please run the Chkdsk utility.
I'm using windows 7 64bit, when I open VMware Workstation 10 can open and prompt could not initialize login and vmware.exe-C:\\$Secure is corrupt and unreadable. Please run the Chkdsk utility. how to solve it??
Software
Corrupt HDD, ran CHKDSK to no avail
Sometime ago I did I was searching for duplicate files on 2TB HDD. This went on for some time and along the way windows asked me to run CHKDSK on it. I ignored it a few times until I finally let it run and it managed to find some problems and proceeded with necessary fixes. Now computer shows it as...
Hardware & Devices
Corrupt partition, can't boot, Startup Repair loop, tried chkdsk
Recently, my computer had a few files that were "corrupted and unreadable" and upon restarting or powering on the PC, it would run chkdsk before booting to Windows. It failed a few times, but once I luckily managed to get it to boot after running Startup Repair for the first time. This was when I...
BSOD Help and Support
CHKDSK not fixing corrupt partition
I have a 250GB HDD which I have split into two partitions (C and D), recently, my D drive was acting very slow so I decided to do a CHKDSK on startup. It took all day (literally) to the point where I had no option but to hard reset the system. It was checking files which I didn't want anymore at...
Performance & Maintenance
Corrupt file, windows tells me to run chkdsk utility.
I recently installed a new 5400rpm WD hard drive (640GB) in my laptop, but now every so often when i download a file i get this message http://a.imageshack.us/img192/4164/chkdsk.jpg All my downloads go into that folder in the root of my E partition, and windows tells me its corrupt. Does this...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:16.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App