Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 boot loop problem

02 Jun 2015   #1
Dreadknight

Windows 7 Professional 32bit
 
 
Windows 7 boot loop problem

I have tried to find a solution for my boot loop problem and each one says to press F8 upon boot. But nothing happens. Here is what happens. I turn on my PC, it shows the windows icon and a bar that shows loading process and in the bottom right hand corner it has two options. F2 and F12. F12 says Boot options and F2 is just set up.
After it loads it shows two more options. F1 says continue, F2 says boot menu. when I press F1 the boot screen shows the white under score blinking then it dissapears and restarts back to the beginning even if I press F8 or any other keys. Any advice?


My System SpecsSystem Spec
.
02 Jun 2015   #2
GokAy

Windows 7 Ultimate x64 SP1
 
 

Seems you are not getting past POST? Is the harddisk shown in F2 setup or Boot Menu (F12)?
My System SpecsSystem Spec
02 Jun 2015   #3
Dreadknight

Windows 7 Professional 32bit
 
 

The hdd shows that its there in F12. But when i enter the drive it fails to boot. image 15.40 is the loading when i turn on the pc and image 16.25 is right after that. when i press F1 on that menu to continue it starts to boot but then fails to boot and restarts back to the beginning.
My System SpecsSystem Spec
.

02 Jun 2015   #4
Dreadknight

Windows 7 Professional 32bit
 
 
images

These are the uploaded images.Windows 7 boot loop problem-2015-06-02-16.25.03.jpg

Windows 7 boot loop problem-2015-06-02-15.40.39.jpg


My System SpecsSystem Spec
02 Jun 2015   #5
GokAy

Windows 7 Ultimate x64 SP1
 
 

Ok, that picture seem to help, from Internet:

Quote:
PROCEDURE:
1) Reboot PC and hit F2 key to go into SETUP.
2) Arrow down to DRIVES and hit Enter.
3) Arrow down one space to "DISKETTE DRIVE" and hit Enter
4) Highlight "OFF" and Hit Enter
5) Press Esc to Exit
6) Highlight EXIT and hit Enter
My System SpecsSystem Spec
06 Jun 2015   #6
Dreadknight

Windows 7 Professional 32bit
 
 

This is what i get for f2. No disk
My System SpecsSystem Spec
06 Jun 2015   #7
Dreadknight

Windows 7 Professional 32bit
 
 

Windows 7 boot loop problem-2015-06-06-17.23.26.jpg


My System SpecsSystem Spec
06 Jun 2015   #8
GokAy

Windows 7 Ultimate x64 SP1
 
 

Standard CMOS Features
- Drive A : None
- Floppy 3 Mode Support: Disabled
My System SpecsSystem Spec
06 Jun 2015   #9
Dreadknight

Windows 7 Professional 32bit
 
 

Windows 7 boot loop problem-2015-06-06-18.15.01.jpg


My System SpecsSystem Spec
06 Jun 2015   #10
Dreadknight

Windows 7 Professional 32bit
 
 

Standard cmos features
My System SpecsSystem Spec
Reply

 Windows 7 boot loop problem




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
windows 7 startup loop, can't boot from anything, NoRootCause
Power went out and so did my pc. I'm not super savy with lingo but can find my way around with good directions. can't boot from anything no safe mode I've tried a few things in command prompt, no luck so far. not wanting to reinstall where do I begin?
BSOD Help and Support
Windows 7 boot loop?
Hi. I am trying to use Windows after installing Ubuntu and it is not working. When I select Windows 7 from GRUB it comes up with "Windows failed to start. A recent hardware or software change might be the cause" and with two options "Launch startup repair (recommended)" and "Start windows...
General Discussion
Windows 7 boot loop - Can't install from CD either...
Using a Dell Inspiron 1545 laptop that's about two years old. I was previously running Vista and decided a few weeks ago to upgrade to Windows 7. Everything was working fine for about a week. One morning I turn on my computer and I find a dialogue window saying that Windows has detected that I was...
General Discussion
Windows 7 OS in boot loop, wont start
I am running Windows 7 Ultimate on a HP Pavilion M9080N. About a week ago the computer went into a Startup Repair loop and Windows would not start. The message I kept on getting was "Startup Repair cannot repair this computer automatically". I performed numerous system restores back to the first...
General Discussion
Windows 7 boot sequence loop
Apologies if this is in the wrong section but there's a few issues so general discussion seemed best. Basically my laptop froze up and crashed and on turning it back on got stuck in a boot loop, and on trying to do a system repair got stuck in the same loop. I've tried everything I can find on...
BSOD Help and Support
windows 7 boot loop no f8
I run windows 7 on a toshiba sat c655. I am stuck in a start-up loop. I have been trying to press f8 but so far no joy. No clue what caused it, been running fine all day i just picked up may laptop, opened it up and it was stuck in the loop.
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:50.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App