Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows Files Corrupt

11 Jul 2015   #41
wben353

Win 7 Home Premium x64/Linux Lite 2.6 x64
 
 
Where do you find these manifest files

NoelDP Where do you find the missing manifest files? Been searching and till don't have a clue where to find them, if they're not on your computer or windows 7 disk. I know you indicated that you have them stored but where did you obtain them initially?


My System SpecsSystem Spec
.
11 Jul 2015   #42
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

I've uploaded a file - mx0aa.zip - to my OneDrive at Noel's OneDrive

Please download and save it.
Right-click on the downloaded file, and select Extract all…

Extract to the default location - which will create a new folder mx0aa in the same place.
Open this folder- there should be two folders inside it (Manifests,and Packages)

Copy the content of the manifests folder (.manifest files) into this folder:

C:\Windows\Temp\CheckSur\Winsxs\Manifests

Now run the CheckSUR tool again (it may take a while)



Post the new CheckSUR.log file, and the CheckSUR.persist.log file.
My System SpecsSystem Spec
11 Jul 2015   #43
Max0101010

Windows 7 Ultimate 64 Bit
 
 

Quote   Quote: Originally Posted by NoelDP View Post
I've uploaded a file - mx0aa.zip - to my OneDrive at Noel's OneDrive

Please download and save it.
Right-click on the downloaded file, and select Extract all…

Extract to the default location - which will create a new folder mx0aa in the same place.
Open this folder- there should be two folders inside it (Manifests,and Packages)

Copy the content of the manifests folder (.manifest files) into this folder:

C:\Windows\Temp\CheckSur\Winsxs\Manifests

Now run the CheckSUR tool again (it may take a while)



Post the new CheckSUR.log file, and the CheckSUR.persist.log file.
Done what you said and attached the logs to this message. In the CheckSUR.log it says all errors have been fixed but when i run autoruns I still have one missing file called rdvgkmd.sys which is found in System32\drivers\ folder.


Attached Files
File Type: log CheckSUR.log (2.8 KB, 1 views)
File Type: log CheckSUR.persist.log (51.3 KB, 0 views)
My System SpecsSystem Spec
.

11 Jul 2015   #44
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

That's because I haven't touched the problems from the SFC scan yet.

Please run another SFC /SCANNOW and post the COMPLETE CBS.log file (zipped) - sometimes the background data is more important than the headlines!
My System SpecsSystem Spec
11 Jul 2015   #45
Max0101010

Windows 7 Ultimate 64 Bit
 
 

Quote   Quote: Originally Posted by NoelDP View Post
That's because I haven't touched the problems from the SFC scan yet.

Please run another SFC /SCANNOW and post the COMPLETE CBS.log file (zipped) - sometimes the background data is more important than the headlines!
The first CBS.log file was over 1GB so I could not open it even with notepad++ thats why it was like. I have uploaded the complete CBS.log file HERE as it exceeded the attach size limit. I also have attached a summarized CBS.log file to this message if you cannot open the other file like me.
My System SpecsSystem Spec
11 Jul 2015   #46
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

The problem appears to be mostly caused by the number of language packs you have installed - do you really have 32 MUI packs installed?

You should consider cutting the number down to no more than 10 - this will dramatically reduce the size of the registry, and may markedly speed up your machine.

It's to late to work on this number of problem files tonight - I'll get to it tomorrow, sometime.
My System SpecsSystem Spec
12 Jul 2015   #47
Max0101010

Windows 7 Ultimate 64 Bit
 
 

Quote   Quote: Originally Posted by NoelDP View Post
The problem appears to be mostly caused by the number of language packs you have installed - do you really have 32 MUI packs installed?

You should consider cutting the number down to no more than 10 - this will dramatically reduce the size of the registry, and may markedly speed up your machine.

It's to late to work on this number of problem files tonight - I'll get to it tomorrow, sometime.
I just ticked all the updates on windows update and installed them. Looks like I have them installed.
My System SpecsSystem Spec
12 Jul 2015   #48
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

OK - until I can get to a decent download point to download the necessary language packs, here's what I have...

I've uploaded a file - mx0ab.zip - to my OneDrive at Noel's OneDrive
Please download and save it.

Right-click on the saved file and select Extract all...
Change the target to C:\ and click on Extract
Close all windows (it would be a good idea to print these instructions!)

Now reboot to the Repair Environment - as soon as the machine restarts, start tapping F8 - this should bring up the Advanced Boot Menu, at the top of which should be the option 'Repair my Computer'
Pick that
You'll have to log in with your username and password.

Pick the option to use a Command Prompt
At the prompt type
DIR C:\mx0ab
hit the enter key - if you get a 'Not Found' error try
DIR D:\mx0ab
or
DIR E:\mx0ab



The drive letter in use when you find the folder will need to be substituted (for<drive>) into the following command...

XCOPY <drive>:\mx0ab <drive>:\windows\winsxs /y /i /s /v /h

(e.g. XCOPY P:\wfire P:\windows\winsxs /y /i /s /v /h )


run the command (it should take almost no time) and when the prompt returns, type
EXIT
and hit the Enter key to exit Command Prompt - reboot to Normal Mode Windows.

Now run SFC /SCANNOW in an Elevated Command Prompt
then reboot and upload the new CBS.log file to your reply
My System SpecsSystem Spec
12 Jul 2015   #49
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

I recommend that you uninstall all the language packs except those that you a re likely to use.

Updates and system checks - and almost certainly boot time - will get faster!
My System SpecsSystem Spec
12 Jul 2015   #50
Max0101010

Windows 7 Ultimate 64 Bit
 
 

Quote   Quote: Originally Posted by NoelDP View Post
I recommend that you uninstall all the language packs except those that you a re likely to use.

Updates and system checks - and almost certainly boot time - will get faster!
I did what you said and have attached the CBS.log file to this message.
Edit: I just uninstalled the unused language packs, thanks for the tip.
My System SpecsSystem Spec
Reply

 Windows Files Corrupt




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows Found Corrupt Files
When I ran the Windows Update troubleshooter, it found some problems. 1.) "Service Registration is missing or corrupt" 2.) "Windows Update error 0x80070057(2015-06-02-T-11_36_25A" Also, I ran a scan with SFC/Scannow, and it found corrupt files, but was unable to fix some of them. Details...
Performance & Maintenance
Windows 7 x64 SP1, various files are either corrupt or missing
I've posted a solution(hopefully) here. Hey guys I need some more help again :confused: After successfully (hopefully more like it) beating the BSOD issue, the trouble just doesn't stop :D I noticed sometime after deleting OptimizerPro with MBAM some strange issues with various software...
System Security
Windows 7 won't boot, SFC found corrupt files, hdd/files still intact
I get a windows boot error 0xc000000e if I try to boot into safe mode or launch startup repair through through windows boot manager. I tried using a windows 7 recovery usb but startup repair says it cannot repair the problem automatically. Through the command line I ran chkdsk /f and /r multiple...
Performance & Maintenance
Windows 7 Corrupt Files
Hi everyone, I am new to the board and hoping someone can help me. I am having issues with my computer. IT is not allowing me to install anything. I believe Windows is corrupt. I get this message when I try to install Microsoft office. Setup cannot procede due to the following errors you must...
General Discussion
Corrupt Windows 7 Pro 64 installation files
So I have a weird situation. A friend of mine has somehow bricked her computer. She is not the most computer savvy person and I have no idea how her computer got to this point, but the computer no longer recognizes her original windows installation. There is no way to upgrade or repair from the...
Installation & Setup
Windows 7 files are corrupt
Hi there, I turned on my desktop today to find that my installation of Windows 7 has become corrupt. My system 32 files are not working correctly. I am able to login, but only after clicking "OK" on an error message that says ""LogonUI.exe - Entry Point Not Found, The procedure entry point...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 02:28.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App