Computer just shuts off randomly - how to find cause

Page 1 of 2 12 LastLast

  1. Posts : 120
    Windows 7 Home Premium
       #1

    Computer just shuts off randomly - how to find cause


    My home built system (Gigabyte GA-E7AUM motherboard with Intel Quad Core and 4GB ram) started to shut itself off in the middle of playing a movie or listening to music. The computer is only used for media activities (running JRiver Media Center as a client).

    I was not having problems before upgrading the CPU from Core 2 Duo E8400 to a Core 2 quad Q9550.
    So I assume the problem is this area.

    I've been monitoring the CPU temps which are in the 50 - 55 degree C range (not high enough to shut down). I usually leave the computer running 24/7 and sometimes it stays running, even under load, but today it shutoff twice within fifteen minutes.

    Watching MB voltages and CPU and MEM loading, but nothing looks wrong. I have a 550W Seasonic S12 power supply, a Crucial M4 SSD drive and one 500GB WD green drive in the case. And the video card is a NVidia GTX 750Ti.

    How can I figure out what is causing the shutdown?
      My Computer


  2. Posts : 1,030
    Linux Mint / XP / Win7 Home, Pro, Ultimate / Win8.1 / Win10
       #2

    There are several likely suspects for shut down conditions including:

    • Failed or improperly seated heat sink (includes improperly applied heat sink compound)
    • Poor air flow in case
    • Power supply issues
    • Improperly seated RAM module or RAM chip failure
    • Incorrect RAM timing in BIOS setup


    I would first do these tasks:

    • Remove heat sink cooler
    • Clean off compound and reapply fresh
    • Reseat cooler
    • Remove and reseat RAM modules


    Regards,
    GEWB
      My Computer


  3. Posts : 120
    Windows 7 Home Premium
    Thread Starter
       #3

    Would a poorly seated CPU cooler (or problem with thermal paste) show up in the temp monitoring software (HWMonitor)?
    I'm not seeing high CPU temps via the software program.
      My Computer


  4. Posts : 5,656
    Windows 7 Ultimate x64 SP1
       #4

    Run Prime95 torture test (max heat) or Intel Burn Test, watch the temps though. You probably won't notice high temps in idle speeds.
      My Computer


  5. Posts : 120
    Windows 7 Home Premium
    Thread Starter
       #5

    Sure - but its shutting off at idle speeds. There is no way this machine will stay running long enough for Prime test.

    If the CPU cooler wasn't do its job, could the CPU heat up enough just on boot up to force a shutdown?

    Right now I can't get to stay running long enough to boot all the way into Windows. it starts up runs the BIOS routine, starts Windows then shuts off. I booted into safe mode and it shut off before the drivers finished loading.
      My Computer


  6. Posts : 3,487
    Win 7 Pro x64/Win 10 Pro x64 dual boot
       #6

    The CPU can heat all the way to destruction just on boot up. That's if the cooler isn't doing its job and the automatic fail-safes don't work. I would check to make sure that the cooler is latched on properly where it's supposed to be and is making adequate contact with the CPU. Maybe the cooler has worked its way loose, or partly loose.

    What thermal paste did you use?

    Are you seeing 50 - 55C at idle? Or under load?
      My Computer


  7. Posts : 4
    Windows 7 64 bit
       #7

    Go to Control Panel -> System -> Advanced System Settings -> Startup and Recovery -> Uncheck "Automatically restart"

    Next time your computer crashes, it should show a blue screen with a message on it instead. Sometimes this blue screen wont have a minidump file and this way you can catch it.

    It could also be a chipset driver incompatibility. Did you update your drivers after changing the CPU?
      My Computer


  8. Posts : 120
    Windows 7 Home Premium
    Thread Starter
       #8

    Thanks for your reply and spending some time thinking about my problem.

    The computer does not restart automatically. When it shuts off I have to press the power button to restart it. I have not seen any blue screens. Sometimes when I restart, Windows message comes up about "Unexpected Shutdown" a couple of times Windows could not detect the boot drive. I have a bunch Kernel Power Event errors in the log now.

    I replaced the CPU cooler on Saturday. Used new thermal paste (brand is ThermalQuake or similar sounding). I've had this paste for a while. It is thicker than I'd like - more like toothpaste.

    While I had MB out, I noted the heatsink cooler on the ChipSet appeared loose but there is no way to tighten it. It sits on the chipset with two spring loaded pins. Maybe this is normal for this cooler.

    I started computer back up and it shut off again before finishing Windows start up. Pressed start button again and got into Windows desktop. Started HWMonitor program saw temps under 50 C for a second then it shut off again.

    So I'm replacing/upgrading. "Needed a good reason anyways". I ordered a new MB, CPU and Memory. Everything else is reusable.
      My Computer


  9. Posts : 120
    Windows 7 Home Premium
    Thread Starter
       #9

    MacNcheese76 said:
    It could also be a chipset driver incompatibility. Did you update your drivers after changing the CPU?
    Interesting - I don't recall now. I don't think so. I did run "Windows update" but that doesn't mean anything.
      My Computer


  10. Posts : 5,656
    Windows 7 Ultimate x64 SP1
       #10

    Not sure about drivers but did you reset CMOS among all of this?

    Also any BIOS updates available?
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 15:46.
Find Us