Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Need SFC help

09 Aug 2015   #1
fevzk

windows 7 ultimate x32 based on x86 bit
 
 
Need SFC help

sfcdetails.txt

i need some guide for these what should i do. suggestions?




My System SpecsSystem Spec
.
10 Aug 2015   #2
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Hello fevzk now there are some issues that appear that cannot be fixed with sfc see pic for examples some look as if they have been fixed some not.

So I strongly suggest you run this in safe mode

http://www.sevenforums.com/tutorials/433-disk-check.html< if necessary include the /f and /r in the command line as per Option2


Then run
http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html



again and check report.


Attached Thumbnails
Need SFC help-sfc.png  
My System SpecsSystem Spec
10 Aug 2015   #3
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

You have two errant files...
Code:
2015-08-09 23:39:39, Info                  CSI    000009dc [SR] Repairing 2 components
2015-08-09 23:39:39, Info                  CSI    000009dd [SR] Beginning Verify and Repair transaction
2015-08-09 23:39:39, Info                  CSI    000009df [SR] Cannot repair member file [l:24{12}]"spwizimg.dll" of Microsoft-Windows-Setup-Navigation-Wizard-Framework, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2015-08-09 23:39:39, Info                  CSI    000009e1 [SR] Cannot repair member file [l:28{14}]"background.bmp" of Setup-UXWizard-ClientImages, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
I'll post a fix protocol later.
My System SpecsSystem Spec
.

10 Aug 2015   #4
fevzk

windows 7 ultimate x32 based on x86 bit
 
 

[QUOTE=ICIT2LOL;3127326]Hello fevzk now there are some issues that appear that cannot be fixed with sfc see pic for examples some look as if they have been fixed some not.

So I strongly suggest you run this in safe mode

http://www.sevenforums.com/tutorials/433-disk-check.html< if necessary include the /f and /r in the command line as per Option2 /QUOTE]


ok thank you for this guide i will chexk this later. one thing here what should be the best choice in check disk option?(should both option be checked
My System SpecsSystem Spec
11 Aug 2015   #5
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

I always run both "switches" and also Noel will be checking back as he is the expert with those codes etc
My System SpecsSystem Spec
11 Aug 2015   #6
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

If you suspect that there may be bad sectors on the disk, you need to run with the /R switch - however this can cause a failing disk to expire completely, so should be used with caution. It scans the whole of the partition, including empty space.
the /F switch simply checks the known files for errors and attempts to correct any found.

back later with the fix protocol!
My System SpecsSystem Spec
11 Aug 2015   #7
fevzk

windows 7 ultimate x32 based on x86 bit
 
 

Quote   Quote: Originally Posted by NoelDP View Post
If you suspect that there may be bad sectors on the disk, you need to run with the /R switch - however this can cause a failing disk to expire completely, so should be used with caution. It scans the whole of the partition, including empty space.
the /F switch simply checks the known files for errors and attempts to correct any found.

back later with the fix protocol!
ok thank you for your help i'l wait for the feedback.
My System SpecsSystem Spec
11 Aug 2015   #8
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

I've uploaded a file - fzkaa.zip - to my OneDrive at Noel's OneDrive
Please download and save it.

Right-click on the saved file and select Extract all...
Change the target to C:\ and click on Extract
Close all windows (it would be a good idea to print these instructions!)

Now reboot to the Repair Environment - as soon as the machine restarts, start tapping F8 - this should bring up the Advanced Boot Menu, at the top of which should be the option 'Repair my Computer'
Pick that
You'll have to log in with your username and password.

Pick the option to use a Command Prompt
At the prompt type
DIR C:\fzkaa
hit the enter key - if you get a 'Not Found' error try
DIR D:\fzkaa
or
DIR E:\fzkaa

The drive letter in use when you find the folder will need to be substituted (for<drive>) into the following command...

XCOPY <drive>:\fzkaa <drive>:\windows\winsxs /y /i /s /v /h

(e.g. XCOPY P:\wfire P:\windows\winsxs /y /i /s /v /h )

run the command (it should take almost no time) and when the prompt returns, type
EXIT
and hit the Enter key to exit Command Prompt - reboot to Normal Mode Windows.

Now run SFC /SCANNOW in an Elevated Command Prompt
then reboot and upload the new CBS.log file to your reply
My System SpecsSystem Spec
11 Aug 2015   #9
fevzk

windows 7 ultimate x32 based on x86 bit
 
 

ok thnx for this guide,
But i need clarification regarding on some Instr.

first. Do i need to run repair my computer then after trying to fix go with an option use command prompt from their?

or

secondly. i can get into my windows and can open command prompt normally, and do the command line.

So which of the two?

one thing when i press f8 and go to advanced boot menu i don't see repair my computer only safe mode at the top of all options.
My System SpecsSystem Spec
11 Aug 2015   #10
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Oh bother!
That means that you'll have to get into the repair environment by using a Repair disk..
System Repair Disc - Create will help.
once you boot with the disk, follow the instructions above the same way as if you were in the repair environment
My System SpecsSystem Spec
Reply

 Need SFC help




Thread Tools Search this Thread
Search this Thread:

Advanced Search



Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:11.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App