Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: sfc /scannow, errors found but could not correct.

22 Aug 2015   #11
Shredder2600

Windows 7 Ultimate x64 on Desktop, Windows 7 Professional x64 on Laptop
 
 

Quote   Quote: Originally Posted by MeOnMine View Post
Quote   Quote: Originally Posted by Shredder2600 View Post
Quote   Quote: Originally Posted by MeOnMine View Post
If you have KB3022345 or KB3068708 installed then un-install and re-boot.
These KB's are known to cause your issue.
When they re-appear in updates, hide them.
I only had KB3068708 installed. I uninstalled it and rebooted. Should I re-run sfc /scannow?
Yes, run the scan.

KB3068708 supersedes KB3022345.
Nope. I'd give you the log file but this stupid file uploader on this forum doesn't work.


My System SpecsSystem Spec
.
22 Aug 2015   #12
Shredder2600

Windows 7 Ultimate x64 on Desktop, Windows 7 Professional x64 on Laptop
 
 
Reinstalling Windows

I only have an Anytime Upgrade Key for Windows 7 Ultimate. Will it work to activate Windows?
My System SpecsSystem Spec
23 Aug 2015   #13
GokAy

Windows 7 Ultimate x64 SP1
 
 

My System SpecsSystem Spec
.

23 Aug 2015   #14
Shredder2600

Windows 7 Ultimate x64 on Desktop, Windows 7 Professional x64 on Laptop
 
 

Quote   Quote: Originally Posted by GokAy View Post
Well, it worked, and Windows is activated.
Will see if Windows is corrupted after all the updates install.
My System SpecsSystem Spec
23 Aug 2015   #15
Shredder2600

Windows 7 Ultimate x64 on Desktop, Windows 7 Professional x64 on Laptop
 
 

Reinstalled Windows and all the updates. Windows is still corrupted...
My System SpecsSystem Spec
23 Aug 2015   #16
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Please also post the C:\Windows\windowsudpate.log file
My System SpecsSystem Spec
23 Aug 2015   #17
Shredder2600

Windows 7 Ultimate x64 on Desktop, Windows 7 Professional x64 on Laptop
 
 

Quote   Quote: Originally Posted by NoelDP View Post
Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Please also post the C:\Windows\windowsudpate.log file
The zip file was too large even after deleting all but the latest cab file. The CBS.log file alone was 100 MBs when zipped.
My System SpecsSystem Spec
23 Aug 2015   #18
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Egads - 100MB zipped would make it around 5GB as a log file!

Please open an elevated command prompt, and run the following commands

DIR C:\Windows\Logs\CBS
type C:\windows\logs\CBS\CheckSUR.log

Post the results...
Here are some instructions to make life easier
1) To open an Elevated Command Prompt Window (the ECP window), click on Start, All Programs, Accessories – then right-click on Command Prompt, and select Run as Administrator. Accept the UAC prompt.
2) To run the commands easier, highlight the block of commands, and right-click on the highlight – select Copy. In the CP Window, click on the black/white icon at top left – select Paste. The commands will run but may not complete the last command, so hit the Enter Key once.
3) To copy the results... click on the Black/White icon in the top left, and select Edit... 'Select All', and hit the Enter key - then use Ctrl+V or r-click+Paste to paste it into your response.
My System SpecsSystem Spec
23 Aug 2015   #19
Shredder2600

Windows 7 Ultimate x64 on Desktop, Windows 7 Professional x64 on Laptop
 
 

Quote   Quote: Originally Posted by NoelDP View Post
Egads - 100MB zipped would make it around 5GB as a log file!

Please open an elevated command prompt, and run the following commands

DIR C:\Windows\Logs\CBS
type C:\windows\logs\CBS\CheckSUR.log

Post the results...
Here are some instructions to make life easier
1) To open an Elevated Command Prompt Window (the ECP window), click on Start, All Programs, Accessories then right-click on Command Prompt, and select Run as Administrator. Accept the UAC prompt.
2) To run the commands easier, highlight the block of commands, and right-click on the highlight select Copy. In the CP Window, click on the black/white icon at top left select Paste. The commands will run but may not complete the last command, so hit the Enter Key once.
3) To copy the results... click on the Black/White icon in the top left, and select Edit... 'Select All', and hit the Enter key - then use Ctrl+V or r-click+Paste to paste it into your response.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\Cedar Maxwell>DIR C:\Windows\Logs\CBS
Volume in drive C has no label.
Volume Serial Number is 4E93-5B62

Directory of C:\Windows\Logs\CBS

08/23/2015 12:42 PM <DIR> .
08/23/2015 12:42 PM <DIR> ..
08/23/2015 12:48 PM 1,674,975,617 CBS.log
08/12/2015 11:49 PM 32,942,069 CbsPersist_20150813191437.cab
08/20/2015 10:05 PM 26,928,899 CbsPersist_20150821215357.cab
08/21/2015 11:24 PM 17,183,124 CbsPersist_20150822172032.cab
08/22/2015 10:35 PM 2,490,255 CbsPersist_20150823035152.cab
08/23/2015 12:28 AM 51,317,340 CbsPersist_20150823053017.cab
08/23/2015 12:47 PM 394 CheckSUR.log
08/23/2015 12:47 PM 397 CheckSUR.persist.log
08/11/2015 05:27 PM 193,975 DeepClean.log
9 File(s) 1,806,032,070 bytes
2 Dir(s) 21,290,835,968 bytes free

C:\Users\Cedar Maxwell>type C:\windows\logs\CBS\CheckSUR.log

=================================
Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 26.0
2015-08-23 12:43

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs

Checking Package Watchlist

Checking Component Watchlist

Checking Packages

Checking Component Store

Summary:
Seconds executed: 274
No errors detected


C:\Users\Cedar Maxwell>
My System SpecsSystem Spec
23 Aug 2015   #20
MeOnMine

Windows 7 Ultimate x64 SP1 OEM
 
 

Did you hide KB3068708 when you updated ?
Did you hide any of the KB's to not install Win 10.
Did you change your update settings to manual download and install.
My System SpecsSystem Spec
Reply

 sfc /scannow, errors found but could not correct.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
How do you fix corrupted files found by SFC /SCANNOW?
How do you fix corrupted files found by SFC /SCANNOW? I've read a similar post to this and ran to get the sfcdetails.txt There appears to be a number of issues, but what is the best way to resolve them?
Performance & Maintenance
I ran sfc/scannow and found corrupt files, how do I fix this?
I ran sfc/scannow through cmd and found corrupt files. Any help would be appreciated and since I'm not good at at these sorts of things, please be patient with me and I'll try my best to follow your guidance :) , thank you. Should I upload the whole cbs log or just the corrputed parts?
Performance & Maintenance
SFC /SCANNOW found errors but was unable to fix them
I have performed a SFC /SCANNOW as I'm having trouble with my windows. It found errors but it was unable to fixe them. How can I fix these errors. I attach the log that I got. Thanks in advance.
Performance & Maintenance
SFC /Scannow found corrupt files, is it necessary to fix?
Hello, I have a Windows 7 Starter Netbook with Intel Atom. I decided to do a SFC /Scannow command on it, despite it not experiencing any issues for a test. (Quite the opposite actually, very fast under 30 second startup, best health yet) But, it found corrupt files. I ran SFC /Scannow 4 times...
Performance & Maintenance
BSOD Scannow shows unable to correct corrupt files
BSOD error 2057, often with BAD_POOL_CALLER or dxgmm.sys errors. Checked RAM by removing each stick in turn. Reinstalled video drivers. sfc /scannow shows corrupt files unable to repair despite several runs. Zip file shows CBS log Zip files attached Dell Vostro W7 x86 OEM pre installed on 2 yr...
BSOD Help and Support
SFC/SCANNOW found problems
HI all. I run the sfc/scannow and it founds some corrupted files. May someone, kindly, tell me what's the issues? May it be related to IE9 RC? How can I attach my CBS.log, which is 7.56 MB? Thanks
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:21.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App