Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: sfc /scannow, errors found but could not correct.

21 Aug 2015   #1
Shredder2600

Windows 7 Ultimate x64 on Desktop, Windows 7 Professional x64 on Laptop
 
 
sfc /scannow, errors found but could not correct.

I ran the sfc /scannow command in windows 7 x64 ultimate and it found errors but could not correct them.
I will attach the CBS.log file. I know there are lots of other threads about this, but this seems to be something that requires the log file to solve.

Please help me fix this.


My System SpecsSystem Spec
.
21 Aug 2015   #2
PC LIZARD

windows 7
 
 

have you run ck hard drive ????Windows Resource Protection found corrupt files but was unable to fix some of them i have bad errors on my pc but it runs fine so i don;t sress out about it..
My System SpecsSystem Spec
21 Aug 2015   #3
GokAy

Windows 7 Ultimate x64 SP1
 
 

Run in cmd:
Code:
findstr /c:"[SR]" %windir%\logs\cbs\cbs.log >"%userprofile%\desktop\sfcdetails.txt"
and attach the sfcdetails.txt if cbs.log is too large.
My System SpecsSystem Spec
.

21 Aug 2015   #4
MeOnMine

Windows 7 Ultimate x64 SP1 OEM
 
 

If you have KB3022345 or KB3068708 installed then un-install and re-boot.
These KB's are known to cause your issue.
When they re-appear in updates, hide them.
My System SpecsSystem Spec
21 Aug 2015   #5
Shredder2600

Windows 7 Ultimate x64 on Desktop, Windows 7 Professional x64 on Laptop
 
 

Quote   Quote: Originally Posted by PC LIZARD View Post
have you run ck hard drive ????Windows Resource Protection found corrupt files but was unable to fix some of them i have bad errors on my pc but it runs fine so i don;t sress out about it..
I tried running sfc /scannow in Safe Mode, it didn't work. I tried running DISM from step #3. Didn't work, error 87, I will attach the log file. I will wait to hear more before I perform an in-place upgrade, that was the next step.
My System SpecsSystem Spec
21 Aug 2015   #6
Shredder2600

Windows 7 Ultimate x64 on Desktop, Windows 7 Professional x64 on Laptop
 
 

Quote   Quote: Originally Posted by GokAy View Post
Run in cmd:
Code:
findstr /c:"[SR]" %windir%\logs\cbs\cbs.log >"%userprofile%\desktop\sfcdetails.txt"
and attach the sfcdetails.txt if cbs.log is too large.
Here is sfcdetails.txt and cbs.log.


Attached Files
File Type: txt sfcdetails.txt (42.0 KB, 8 views)
My System SpecsSystem Spec
21 Aug 2015   #7
Shredder2600

Windows 7 Ultimate x64 on Desktop, Windows 7 Professional x64 on Laptop
 
 

Quote   Quote: Originally Posted by MeOnMine View Post
If you have KB3022345 or KB3068708 installed then un-install and re-boot.
These KB's are known to cause your issue.
When they re-appear in updates, hide them.
I only had KB3068708 installed. I uninstalled it and rebooted. Should I re-run sfc /scannow?
My System SpecsSystem Spec
22 Aug 2015   #8
GokAy

Windows 7 Ultimate x64 SP1
 
 

No corruption seen in your sfcdetails.txt, it was possibly the pseudo corruption of the mentioned Windows Updates.

That DISM command is for Windows 8 and above as far as I know.

What problems do you have anyway?
My System SpecsSystem Spec
22 Aug 2015   #9
Shredder2600

Windows 7 Ultimate x64 on Desktop, Windows 7 Professional x64 on Laptop
 
 

Quote   Quote: Originally Posted by GokAy View Post
No corruption seen in your sfcdetails.txt, it was possibly the pseudo corruption of the mentioned Windows Updates.

That DISM command is for Windows 8 and above as far as I know.

What problems do you have anyway?
I have been trying to play GTA V and Rockstar Support suggested this could be the issue, but refused to help me resolve it.

The DISM command did work in Windows 7, but with the results stated above.
My System SpecsSystem Spec
22 Aug 2015   #10
MeOnMine

Windows 7 Ultimate x64 SP1 OEM
 
 

Quote   Quote: Originally Posted by Shredder2600 View Post
Quote   Quote: Originally Posted by MeOnMine View Post
If you have KB3022345 or KB3068708 installed then un-install and re-boot.
These KB's are known to cause your issue.
When they re-appear in updates, hide them.
I only had KB3068708 installed. I uninstalled it and rebooted. Should I re-run sfc /scannow?
Yes, run the scan.

KB3068708 supersedes KB3022345.
My System SpecsSystem Spec
Reply

 sfc /scannow, errors found but could not correct.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
How do you fix corrupted files found by SFC /SCANNOW?
How do you fix corrupted files found by SFC /SCANNOW? I've read a similar post to this and ran to get the sfcdetails.txt There appears to be a number of issues, but what is the best way to resolve them?
Performance & Maintenance
I ran sfc/scannow and found corrupt files, how do I fix this?
I ran sfc/scannow through cmd and found corrupt files. Any help would be appreciated and since I'm not good at at these sorts of things, please be patient with me and I'll try my best to follow your guidance :) , thank you. Should I upload the whole cbs log or just the corrputed parts?
Performance & Maintenance
SFC /SCANNOW found errors but was unable to fix them
I have performed a SFC /SCANNOW as I'm having trouble with my windows. It found errors but it was unable to fixe them. How can I fix these errors. I attach the log that I got. Thanks in advance.
Performance & Maintenance
SFC /Scannow found corrupt files, is it necessary to fix?
Hello, I have a Windows 7 Starter Netbook with Intel Atom. I decided to do a SFC /Scannow command on it, despite it not experiencing any issues for a test. (Quite the opposite actually, very fast under 30 second startup, best health yet) But, it found corrupt files. I ran SFC /Scannow 4 times...
Performance & Maintenance
BSOD Scannow shows unable to correct corrupt files
BSOD error 2057, often with BAD_POOL_CALLER or dxgmm.sys errors. Checked RAM by removing each stick in turn. Reinstalled video drivers. sfc /scannow shows corrupt files unable to repair despite several runs. Zip file shows CBS log Zip files attached Dell Vostro W7 x86 OEM pre installed on 2 yr...
BSOD Help and Support
SFC/SCANNOW found problems
HI all. I run the sfc/scannow and it founds some corrupted files. May someone, kindly, tell me what's the issues? May it be related to IE9 RC? How can I attach my CBS.log, which is 7.56 MB? Thanks
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:32.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App