Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: System Paging File

31 Oct 2015   #1
boeingaviation

Windows 7 Pro 64-bit
 
 
System Paging File

Hi There,

I was wondering if someone with more knowledge than me can assist.

I have 16GB DDR3 1600 Ram installed on Windows 7 SP1 64 Bit.

Here is a screenshot of my Paging file tab showing what's allocated:

C Drive = System Managed
X Drive (FSX) = System Managed
P Driver (Prepar3D) = System managed.

Can someone please clarify why I have 48GB of paging file enabled. My computer is running as it should and gaming is fine, however I don't have 48GB of RAM installed (if that's where Paging generates from), so why is that number so.....and should I manually set a custom amount.

Thanks in advance.


My System SpecsSystem Spec
.
31 Oct 2015   #2
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

Look at it again. 48 MB not GB.

On my systems I just let Windows 7 manage pagefile and all memory process.
My System SpecsSystem Spec
31 Oct 2015   #3
boeingaviation

Windows 7 Pro 64-bit
 
 

Isnt 48977mb 48GB as 1000mb=1GB
My System SpecsSystem Spec
.

31 Oct 2015   #4
derekimo

Microsoft Community Contributor Award Recipient

 
 

Quote   Quote: Originally Posted by layback bear View Post
look at it again. 48 mb not gb.
System Paging File-2015-10-31_00h28_26.png


My System SpecsSystem Spec
31 Oct 2015   #5
boeingaviation

Windows 7 Pro 64-bit
 
 

So is that normal to have that much on paging file or should i set a custom size?
My System SpecsSystem Spec
31 Oct 2015   #6
cyclops

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

boeing, as the description states, that is the combined (meaning as it is accounted for across all drives), system managed paging file system allocated. That allocation is managed by the system and is not relative to physical memory ,but virtual space available for paging use. And yes 48XXX MB is 48 GB. LaybackBear may not have had that 2nd cup of coffee yet.
My System SpecsSystem Spec
31 Oct 2015   #7
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

Making a fresh pot as I post. I need some help getting my 3 brain cells working again.
My System SpecsSystem Spec
31 Oct 2015   #8
Ranger4

Windows 7 Home Premium 64 bit sp1
 
 

A 48GB paging file does seem excessive. If you are running a SSD you can reduce the page file to 1GB or 2GB. You also have 16GB of RAM, so try a smaller page file size & see how you go.

Use the method that you have in first post & select Custom Size & remember that the setting requires MB so to get say 2GB you need to type in 2000MB.
My System SpecsSystem Spec
31 Oct 2015   #9
boeingaviation

Windows 7 Pro 64-bit
 
 

So would I set all 3 of those drives in my screenshot which are currently "system managed" to 2GB each.

My Windows drive is on an SSD.
My System SpecsSystem Spec
31 Oct 2015   #10
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

Not sure how it would ever get to 48 GB with only 16 GB of memory, the page file is usually the same as the amount of memory installed.

With 16 GB of memory or higher, I don`t even use a page file. (just my personal choice)

Never seen another drive other then C even use a page file.

But I have no clue what your P and X partitions are either.

Set each to 4 GB max.
My System SpecsSystem Spec
Reply

 System Paging File




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Removing Win 7 system file use of paging file
Hello the Forum, I have not found, but would guess there is a registry method for turning off Windows 7 use of the paging file for system files. I have 24G ram, but win 7 immediately offloads to the paging file before I even run any applications. Not trying to stop Win 7 from paging programs and...
General Discussion
Paging File
When I go to boot up the computer sometimes it states that my computer has made a temp paging file. Doesn't tell me where, it side it did. I have a RAM Disk installed which I've told the paging file to go to, to include my temp files. I've done this because I have an SSD.
Performance & Maintenance
What should I set my paging file to?
My ram is 4.00gb (3.80 usable). I now have my paging file set to 0. Someone told me not to this, so can anyone help me?
Performance & Maintenance
SSD and paging file(s).
So many different "recommendations" - which is best and why 1) Keep page file on C: drive system managed 2) Keep page file on C: fixed small size if you have lots of ram 3) Move page file to another drive, system sized 4) Set 2nd system managed page file on a second drive, small page file on...
Hardware & Devices
Paging File
When my system boots I get a message that there is no paging file and windows will set a tempoary one. I have 4 gigs of ram so I go through the procedure of setting a page file size and reboot after which I get the same message. Can someone tell me what I must do to correct this? Thanks, Bob
Performance & Maintenance
Paging file system will not set
Just love these new issues with the RTM bits. Never saw on earlier builds. So, I have a computer that defaults to no paging file set. No matter what I try, it will not let any paging file be set, always goes back to nothing set. Any ideas? Dave
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:59.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App