PC takes around 10 minutes or less to fully boot

Page 3 of 3 FirstFirst 123

  1. Posts : 16
    Windows 7 Ultimate x64
    Thread Starter
       #21

    rvcjew said:
    Yeah looks good after those two things shutdown then on again (don't reboot).
    All right! I'll do that tomorrow, gonna go to sleep now, it's 2AM in my country, defragmentation seems like it's going to take ages to finish. Thanks for the help! I'll update you on how i'll go.
      My Computer


  2. Posts : 1,992
    10 Pro x64
       #22

    if it's taking ages that means its a good thing your doing it.
      My Computer


  3. Posts : 4,049
    W7 Ultimate SP1, LM19.2 MATE, W10 Home 1703, W10 Pro 1703 VM, #All 64 bit
       #23

    Does your machine start faster in Safe Mode?
    Can you use a Restore Point to restore your PC back the way it was a couple of months ago?

    Check out what the Event Viewer records show (especially the "Critical" and "Error" sections).
    PC takes around 10 minutes or less to fully boot-event-viewer.png
    If you reboot your machine, you can then see if there are any new Event Viewer messages (which will probably be related to your reboot).

    You could also check out your Reliability History.
    Open the Start Menu and type in reliable into the search box.
    PC takes around 10 minutes or less to fully boot-start-menu-search.png
    Also check out "Performance Information and Tools".
    Last edited by lehnerus2000; 10 Dec 2015 at 20:25. Reason: Picture Added
      My Computer


  4. Posts : 21,004
    Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
       #24

    For my two cents worth have you done a memtest? RAM - Test with Memtest86+

    You could also look in the Task Manager (Processes) to see what maybe eating up the RAM too. I did notice too the RAM is a 667Hz

    Plus as everyone knows I like to see the state of the PSU so do this.
    Using HW Info
    PART A:
    You can test the volts on the PSU with HW Info HWiNFO, HWiNFO32/64 - Download < download the right bit version and close the right hand window select Sensors and scroll down to the power section where you will see what the volts are doing see my pic. In my pic the section (Nuvoton) with VBATT is a dead give away you are in the section for the rail voltages. There are other section titles and one that pops up often is ITE
    Now the voltage on the different rails have to be within 5% =+/- of what is required or the machine will not work properly if at all.
    See this for the rail voltage info
    Power Supply 101: A Reference Of Specifications - Power Supplies (Section 2.)
    The original right hand window shows the machine running and is handy for that but for looking at the components in some detail close it and use the main left hand side panel
    FOR OTHER COMPONENTS
    PART B:
    Open each small square with + in it on the section the components are in and then click on the individual component/s (it will highlight in blue) - in the right hand side will appear all sorts of details including brands speeds and other essential info that particular device. See pic for example.
    Use PART A:
    Attached Thumbnails Attached Thumbnails PC takes around 10 minutes or less to fully boot-memtest-start-up-screen.png   PC takes around 10 minutes or less to fully boot-memtest-errors.png   PC takes around 10 minutes or less to fully boot-hw-info-desktop-psu.png  
      My Computer


  5. Posts : 16
    Windows 7 Ultimate x64
    Thread Starter
       #25

    lehnerus2000 said:
    Does your machine start faster in Safe Mode?
    Can you use a Restore Point to restore your PC back the way it was a couple of months ago?

    Check out what the Event Viewer records show (especially the "Critical" and "Error" sections).
    PC takes around 10 minutes or less to fully boot-event-viewer.png
    If you reboot your machine, you can then see if there are any new Event Viewer messages (which will probably be related to your reboot).

    You could also check out your Reliability History.
    Open the Start Menu and type in reliable into the search box.
    PC takes around 10 minutes or less to fully boot-start-menu-search.png
    Also check out "Performance Information and Tools".

    Hi,
    I'm really not sure at what to look at in the Event Manager, and in Reliability History, there's just many many errors each day. And there is something in the the performance information and tools. I'm adding pictures.
    Attached Thumbnails Attached Thumbnails PC takes around 10 minutes or less to fully boot-adv-tools.jpg   PC takes around 10 minutes or less to fully boot-adv-options-2.jpg  
      My Computer


  6. Posts : 20,583
    Win-7-Pro64bit 7-H-Prem-64bit
       #26

    Avast :/
    Well you could uninstall Avast and try Panda it is better anyway
    https://www.avast.com/uninstall-utility

    Go into Steam settings and uncheck start with windows.
      My Computer


  7. Posts : 1,992
    10 Pro x64
       #27

    ThrashZone said:
    Avast :/
    Well you could uninstall Avast and try Panda it is better anyway
    https://www.avast.com/uninstall-utility

    Go into Steam settings and uncheck start with windows.
    Agreed I have seen both those things make a boot up easily 5 minutes.
      My Computer


  8. Posts : 1,436
    Windows 7 Home Premium
       #28

    rvcjew said:
    ThrashZone said:
    Avast :/
    Well you could uninstall Avast and try Panda it is better anyway
    https://www.avast.com/uninstall-utility

    Go into Steam settings and uncheck start with windows.
    Agreed I have seen both those things make a boot up easily 5 minutes.
    Just to throw it out there, but might it be a boot option that is also goofing around?
      My Computer


  9. Posts : 16
    Windows 7 Ultimate x64
    Thread Starter
       #29

    rvcjew said:
    ThrashZone said:
    Avast :/
    Well you could uninstall Avast and try Panda it is better anyway
    https://www.avast.com/uninstall-utility

    Go into Steam settings and uncheck start with windows.
    Agreed I have seen both those things make a boot up easily 5 minutes.
    I did both of these. And it did actually help! It's not so bad as it was before. Not perfect, but a lot better. My main problem is BSOD now.. I guess I'll post about it in an appropriate section. Because I got BSOD like 3 times today. Gonna mark this thread as solved. Thanks everyone!
      My Computer


  10. Posts : 20,583
    Win-7-Pro64bit 7-H-Prem-64bit
       #30

    Hi,
    If you have Origin for games also go into it's settings and uncheck start with windows as well as any other utility...
    Be sure to restore the msconfig startup to normal.
      My Computer


 
Page 3 of 3 FirstFirst 123

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 12:01.
Find Us