Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Disk Management Question

14 Feb 2009   #1
swarfega

Windows 7 Professional 64-bit
 
 
Disk Management Question




Looking at the above image, you will see that drive d: is listed first. Is that because these drives are listed in the order at which they are connected to the motherboard?


My System SpecsSystem Spec
.

14 Feb 2009   #2
rgauchey

 
 

Yes. You can change the letter designation if you wish.
My System SpecsSystem Spec
14 Feb 2009   #3
swarfega

Windows 7 Professional 64-bit
 
 

Yeah I already have but Ill be formatting due to new hd coming next week so Ill reconfigure the sata cables then
My System SpecsSystem Spec
.


Reply

 Disk Management Question




Thread Tools





Similar help and support threads
Thread Forum
question regarding disk management
what does it mean to convert a drive to dynamic disc, what is it and what does it do if i select all my ssd's and convert it to a dynamic disk?
Hardware & Devices
hard disk changed to dynamic type after using disk management
I am facing problem of unable to shrink c drive in my windows 7 home premium.I have read everyone writing in about not to change the hard disk to dynamic type,but after partitioning one time using disk management now all my partitions are dynamic type & I still have 288gb left in c drive. I need...
General Discussion
Disk management converted only disk to dynamic, will it boot?
Hi, I was going to try dual booting Windows 8 on my laptop following a guide I found, and it said to go onto disk manager and shrink a volume to create another volume. The guide after the shrink only had two disks, and I had 5 disks (A recovery disk, HP tools and a blank one, along with my C disk,...
Hardware & Devices
Disk Management shows failed disk?
I just cloned my OS HD to a new Crucial M4 128Gb & it is working just fine. I later noticed a failed disk - that is about the same size as the new M4. Screenshot is attached. Do I dare delete this failed phantom disk? Please - no guesses!
Hardware & Devices
Disk numbers in Disk Management matters?
After adding two new SATA hard drives in my computer, I noticed that Disk Management lists SATA Drive C (which contains Win 7) as Disk 2. The other two drives are listed as Disk 0 and Disk 1. Since I connected SATA Drive C in SATA port 1, I was expecting to see it listed as Disk 0. SATA drives...
Installation & Setup
Need quick help about new hard disk partition on win 7 disk management
Hi to all seven forums. I bought a new 1tb hard disk, and I connected it to my pc as slave, and when I creating the partition in windows seven disk management and right click to creates new partition, it had four option. 1. simple volume 2. spanned volume 3. stripped volume 4. mirrored...
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:34.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App