Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.



Windows 7: What's your memory assessment speed?

11 May 2010   #681

windows 7 premium x64
 
 

just a little fsb tweaking got me there. thanks!

My System SpecsSystem Spec
11 May 2010   #682

Windows 8.1 Professional x64
 
 

Quote   Quote: Originally Posted by Dave76 View Post
Quote   Quote: Originally Posted by Everlong View Post
Quote   Quote: Originally Posted by Everlong View Post
Hmm, I've just tried this on my DDR3 now. I have 1333MHz DDR3 RAM, and I only get around 6900MB/s in dual channel. I'm pretty sure I should be getting slightly higher than that
So I came back to this. As I bought the 3x2GB stick off a friend, I popped the 3rd stick in, fired up comp, and re-did the speed test. The speeds were exactly the same, and it was reported to still be in dual channel..
Your processor is dual channel, as well as your board.

Looks like your speed is a bit slow.

I have a dual channel processor and board, 4X2GB XMS3 DDR3 1600 and get 19,424 MB/s.

Did you check the RAM settings in BIOS?
Voltage and timings.

Did you leave them at default settings or change them to the manufacturer specs?

Do you have a Extreme Memory Profile (X.M.P.) setting?

This will automatically set the RAM to manufacturer specs. If the voltage is higher than default it might increase the voltage on your processor, so check that before and after enabling XMP.

Hope this helps.

EDIT:
Just found this on a review of your MOBO: "The CPU and memory busses are “fully” independent of each other allowing you to pretty much dial up whatever speed you wish for each."
I've tried everything I can think of and just pretty much given up with it now. The fastest I could get it with two sticks in is around 7,000MB/s, I then just tried putting a 3rd stick in just to see how it affected speeds, and it knocked about 30MB/s off. I'll be upgrading again at the end of the year, probably to an i7 etc, and it's running fine at the moment, so I'll just hang on.
My System SpecsSystem Spec
12 May 2010   #683

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium x64 SP1
 
 

Changed my BCLK to 160 w/turbo on. Now running my ram at native 1600MHz. 2 x 2GB 1600MHz HyperX .

Name:  Memory.jpg
Views: 36
Size:  37.2 KB

A Guy


My System SpecsSystem Spec
.


12 May 2010   #684

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Will assume that's DDR3??

How about some specs so we can see what your running?
My System SpecsSystem Spec
12 May 2010   #685

Windows 7
 
 

Quote   Quote: Originally Posted by Beemerke View Post
Kingston 2x2GB@1333Mhz 9/9/9/24 (isn't that suppose to be slow??)
No OC yet, will use the mobo OC button soon tho
Used the OC Genie button on my MSI mobo, before and after


Attached Images
 
My System SpecsSystem Spec
12 May 2010   #686

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Good score, that's more like it

Those overclock buttons are nice.

Are they running at/near the manufacturer stated specs? Or above?
My System SpecsSystem Spec
12 May 2010   #687

Windows 7
 
 

Don't know if you can see that in windows so just checked the bios.
Timings are the same: 9-9-9-24.
Guess DRAM frequenty is what the manufacturer lists, this is at 1552Mhz now instead of 1333Mhz so fast ram for a cheap price lol.
No idea what QPI Ratio is: 16, QPI Frequenty is 6208Mhz.
My System SpecsSystem Spec
12 May 2010   #688

Windows 7 Ultimate 64 - OEM Service Pack 1
 
 

Here are my memory speeds

Memory Patriot Viper 6GB 3x2GB DDR3 PC3-1200C9 1600Mhz Tri Channel


Steve


Attached Images
 
My System SpecsSystem Spec
12 May 2010   #689

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Quote   Quote: Originally Posted by Beemerke View Post
Don't know if you can see that in windows so just checked the bios.
Timings are the same: 9-9-9-24.
Guess DRAM frequenty is what the manufacturer lists, this is at 1552Mhz now instead of 1333Mhz so fast ram for a cheap price lol.
No idea what QPI Ratio is: 16, QPI Frequenty is 6208Mhz.
All looks good.

Good RAM, nothing slow about that

Quote   Quote: Originally Posted by steve-pressman View Post
Here are my memory speeds

Memory Patriot Viper 6GB 3x2GB DDR3 PC3-1200C9 1600Mhz Tri Channel


Steve
That's a good score for your DDR3 triple channel.
My System SpecsSystem Spec
12 May 2010   #690

 

Name:  ffff.PNG
Views: 31
Size:  55.4 KB
4gbs DDR2 830mhz


My System SpecsSystem Spec
Closed Thread

 What's your memory assessment speed?





Thread Tools



Similar help and support threads for2: What's your memory assessment speed?
Thread Forum
What's your memory assessment speed? [2] Performance & Maintenance
Memory speed - wrong memory??? Hardware & Devices
Memory speed Performance & Maintenance
What's your hard drive assessment speed? Performance & Maintenance
Memory speed in the bios Hardware & Devices
Memory Assessment Speed Performance & Maintenance
Memory speed Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 02:39 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33