New
#1801
Option two as well. Make sure you have the 1GB sticks in the same color slots and the 2GB ones in the other color, this will make it dual channel operation.
What's your memory assessment speed?
-
-
New #1802
New build just completed. Stock clocks, BIOS defaults. Mushkin 8x4GB 1333MHz 9-9-9-24-2T, QUAD Channel.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>winsat mem
Windows System Assessment Tool
> Running: Feature Enumeration ''
> Run Time 00:00:00.00
> Running: System memory performance assessment ''
> Run Time 00:00:05.21
> Memory Performance 31670.01 MB/s
> Total Run Time 00:00:06.29
C:\Windows\system32>winsat cpu -compression
Windows System Assessment Tool
> Running: Feature Enumeration ''
> Run Time 00:00:00.00
> Running: CPU Assessment '-compression'
> Run Time 00:00:10.75
> CPU LZW Compression 964.61 MB/s
> Total Run Time 00:00:11.97
C:\Windows\system32>winsat cpu -encryption
Windows System Assessment Tool
> Running: Feature Enumeration ''
> Run Time 00:00:00.00
> Running: CPU Assessment '-encryption'
> Run Time 00:00:10.64
> CPU AES256 Encryption 464.46 MB/s
> Total Run Time 00:00:11.84
C:\Windows\system32>winsat mem
Windows System Assessment Tool
> Running: Feature Enumeration ''
> Run Time 00:00:00.00
> Running: System memory performance assessment ''
> Run Time 00:00:05.21
> Memory Performance 31764.72 MB/s
> Total Run Time 00:00:06.46
C:\Windows\system32>
-
New #1803
Hmmm, just came across this thread via google and decided to sign up:
-
-
New #1805
Hexmaniac, those memory scores are off the hook! Do you have a scrrenshot to post?
Welcome to Seven Forums bhavv. Good numbers
A Guy
-
-
New #1807
Well, Im ordering a GTX 670 later today, 3 and a half hours left before the NDA ends to replace my 560 ti SLI so I dont have that yet
I'm getting my overclocks set for benching it, then I drop everything back to stock speeds for 24/7 use.
I broke 30000 Mb/s:
But it wasnt Super PI stable. 7-8-7-20, 1.6675 Dram volts, and 1.4v QPI made it stable now though, and its completed 32m so should be enough to get through a bench run when I get my new card tomorrow.
This ram is rated 9-9-9-28, 2133 Mhz, but this is the absolute highest it will go. Even loosening the timings to 11-11-11-30-3T wont get it stable at 2000 Mhz.
Omly just high enough to get 4.4 Ghz on my I7 980 @ 1.35v. Pushing the BCLK up to just 192 and 1925 Mhz ram = only 8 Gb detected no matter the timings.
-
-
-
New #1810
4x4GB Mushkin DDR3 @1333, 9-9-9-24
Related Discussions