Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: System Health Report

23 Jan 2010   #1
lizzybee

windows 7 ultimate 32bit
 
 
System Health Report

In November I cleanly installed Win7 Ultimate on my machine and all has been great but for the fact that I am not able to generate a system health report anymore. I get the attached error. I cannot understand this as all the other monitoring aspects work fine: I can monitor power usage, defrag, etc but I can't generate the system health report. Is it possible that a registry cleaning recently messed up a driver? -system-health-report.png

I apologize that I can't provide anymore details- I did do a system restore yesterday thinking that maybe a Windows Update perhaps interfered with this but it didn't make any difference. I wonder if anyone has a thought or suggestion for me that might help. Thank you so very much.




My System SpecsSystem Spec
.

23 Jan 2010   #2
garysgold

Vista Ult 64 bit Seven Ult RTM x64
 
 

Hello Lizzybee,

Welcome to Seven Forums.

If you don't have any older restore points to try, then I would try this. SFC /SCANNOW Command - System File Checker

If that doesn't work, then you might try this. Repair Install

Although I'm not positive that the reg cleaner caused this problem, I recommend against the use of registry cleaners as they often cause more trouble than good unless you know exactly what is being deleted.

Hope this helps.

Gary
My System SpecsSystem Spec
23 Jan 2010   #3
lizzybee

windows 7 ultimate 32bit
 
 

Many thanks Gary, I will try this and let you know what happened. I have been previously cautioned about Registry Cleaners ...Beth
My System SpecsSystem Spec
.


23 Jan 2010   #4
richc46

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium SP1, clean install, upgrade disc
 
 

I have been using Window since Windows 98. I never used a reg cleaner and never had a problem due to that fact.

Just maintain your computer, defrag, clean disc, use AntiVirus etc. and you will be ok.
My System SpecsSystem Spec
24 Jan 2010   #5
gregrocker

 

The only Registry cleaner needed is the one the pros all use: CCleaner Reg tab.

Even it will not attempt to remove unwanted Reg items, only discarded "shells."

If the User knows enought to pick and choose which registry items are no longer needed because Software has been uninstalled, then it should be done directly in the 2nd and 3rd Registry hives "Software" keys after setting a System Restore point.

For example, when I remove XYZ program, I always check those Reg hives to see if XYZ is in the Software keys and delete. Just make sure no other programs by that name are still in use.
My System SpecsSystem Spec
03 Mar 2010   #6
pacinitaly

windows 7 professional & ultimate 64bit laptops
 
 

My System SpecsSystem Spec
04 Mar 2010   #7
lizzybee

windows 7 ultimate 32bit
 
 
System Health Report

Thank you for all your trouble. I installed my Win7 Ultimate again only I changed from 32 bit to 64 bit and, of course since it was a clean install, I am now able to generate the System Health Report without any problem. I do believe that the Registry Cleaner was responsible for that glitch. All's well now though! I am grateful to all replies...Beth
My System SpecsSystem Spec
04 Mar 2010   #8
pacinitaly

windows 7 professional & ultimate 64bit laptops
 
 

super kewl it all works.
I'm afraid to re-image ( reinstall ) it will take 10hrs.
this works for me but I don't know what to look for {in the report}
stay well my friend



~Carmine
My System SpecsSystem Spec
Reply

 System Health Report




Thread Tools





Similar help and support threads
Thread Forum
Generate a system health report does not work
OK, lets see if we can get this one to work next :) Seems to be quite common out there. I run the application and get the little timer saying its working for 60 seconds then it fails and gives the error message:
Performance & Maintenance
Generate system health report error?
Hi,Just ran this test and i get an error on "hardware device and drivers check". Is this something to worry about?laptop seems to be running fine. Thanks in advance for any help. http://farm9.staticflickr.com/8026/7175694583_76cfc18090_z.jpg
Performance & Maintenance
eh System health report?
im trying to post my BSOD problem and when i reading the instruction i got stuck at instruction number 3... it says 3. Run a System Health Report - START | type perfmon /report - a viewer will appear | Click on "File" and "Save As" an HTML file (default file extension) but i don't see view or...
Performance & Maintenance
Can't Generate System Health Report
When I generate a system health report, this is just what it shows, even if I ran a sfc /scannow it still can't be fixed. What should I do?
Performance & Maintenance
System Health Report
Hi, Any ideas as to what this notification means and what could be done to rectify matters:--- "Missing Events in Event Log.....19% (3,985) missing "
Performance & Maintenance
System health report
I generated a system health report and notice in the basic system checks in the hardware device and driver check the result is failed. I have updated my bios to the latest and installed all of the drivers available from hp for my system for windows 7 64 bit. Anything I should be concerned about?...
General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 07:23.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App