Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Windows 7 fails to go into safe mode. Classpnp.sys

07 Mar 2010   #1

Windows 7 32 bit
Windows 7 fails to go into safe mode. Classpnp.sys

Hi, I wanted to go into safe mode on windows 7 but it kept stopping at classpnp.sys . After reading a few threads I read about using Msconfig and checking the safe mode option under "Boot". It still keeps staying at classpnp.sys and when I hit F8 and hit "Last Known Good Configuration (advanced)" it seems to be able to get trough and it says it's actually loading up safe mode but then it changes to a black screen and does not change from that screen. I would appreciate and information you guys have that could solve this problem.

My System SpecsSystem Spec
08 Mar 2010   #2

Windows 7 32 bit

Anyone have even the slightest clue? Is there something I can type in cmd that can open up msconfig from the repair screen?
My System SpecsSystem Spec
08 Mar 2010   #3

Microsoft Community Contributor Award Recipient

Windows 10, Home Clean Install


Try going to search, type msconfig, when you see msconfig, right click and run as administrator. See it that helps.

You can access CMD, and with the same procedure get to msconfig
My System SpecsSystem Spec

08 Mar 2010   #4

Windows 7 32 bit

That is what I did and what got me into this whole problem. My problem is that Every time I start my computer it automatically starts to go into safe mode and gets stuck at classpnp.sys. If I could disable it somehow then I could get into my account and uncheck safe mode.
My System SpecsSystem Spec
30 Jun 2010   #5

Windows 7, Centos 32bit and Mac Os Leopard!

Check your BIOS IDE Sata configuration.
Try to clean your BIOS to default config in case you didn't have success with the first hint.
My System SpecsSystem Spec
27 Jun 2012   #6

windows 7 64 bit
safe mode help


I think if you were to push F2, F1, or Del key during the start up you wil be redirected to a menu that will allow you to start with last known configuration along with a few others...sometimes you can get through things like getting to command prompt by going to sytem repair and when it finishes the start up repair it will give you roll back options...sometimes it may look like it isnt working but it is worth waiting a few minutes..also having your windows 7 disc in the tray might help...maybe the next time it starts in safe mode you can let it fail on the file and wait like 5 minutes and windows 7 disc wil operate itsself..and you might be able to re-install the drivers or do a self repair
My System SpecsSystem Spec

 Windows 7 fails to go into safe mode. Classpnp.sys

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
OS not loading, Safe Mode won't boot past classpnp.sys
I replaced my Intel Q6600+DP35DP mobo with an i5-4690K and Asus Z97 K. I get a "missing operating system" message. When I boot up with a Windows 7 64 bit installation USB and then Repair Your Computer, it does find the OS on the hard drive still. I tried following this guide for repairing the...
General Discussion
BSOD while classpnp.sys classpnp.old (Safe Mode)
Hello, I have recently taken the hard drive of my laptop and connected it to my desktop computer. The name of the hard drive is ; WD2500B EVS - 60 USTO (250GB). However when I try to boot from using windows 7 than I get a BSOD but when I boot it using ubuntu it works. The Hard Drive is dual...
BSOD Help and Support
Windows 7 safe mode reboots at Classpnp.sys
So basically I have Windows 7 installed on a 250GB Seagate external HD. I can boot it with no problems using a VM in VMware Workstation 7.1.3, but whenever I try to native boot it, it takes a long time to load and when the 'starting windows' is reached a blue screen flashes and then the machine...
BSOD Help and Support
BSOD on boot logo, safe mode stuck at classpnp.sys
Hi guys, I need help on my Acer 4750G here. I've been lurking around the internet lately searching for this problem's solution. But no answer :cry: Here's the story: So this morning my I started my laptop, it kinds of frozen/lagged so I had to shut it down via holding the power button 'till the...
BSOD Help and Support
Classpnp.sys freeze when booting in safe mode
Recently we had an electrical issue in our home. We had a surge go through and thankfully my surge protector to the hit but since then I have not been able to get my pc to boot up. I have tried to get it back to factory by pressing alt+f10 repeatedly per the manufacturer and was able to get it once...
BSOD Help and Support
PC Hangs on Boot And on Safe mode at CLASSPNP.SYS, Setup-fix not work
My signature Pc, the one I had problems last week is misbehaving again. It hangs while trying to Boot at the "glowing-pulsing colors" thingie. If i try to boot in Safe mode it Hangs at CLASSPNP.SYS If i boot from the Windows Setup DVD , or a repair DISK I've made, and i choose to do a...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:30.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App