Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: changed BIOS settings..:((

06 May 2010   #11

Windows 7 ultimate 64 bit / XP Home sp3

Just a suggestion, try visiting sites dedicated to Overclocking. Read your manual and find the CMOS reset pins. Much easier than removing the battery everytime your clocking won't allow your system to start.( Not trying to step on your toes Dwarf). patience, small steps,researh then more research. learn your bios, it's your best friend when taking on this addictive practice. You'll also need certian programs to help you monitor heat. Prime 95 to stress your settings to insure it is stable at the speeds you set it at. I wish you the best of luck, it can be as frustrating as rewarding and is a learned art. Fabe

My System SpecsSystem Spec
06 May 2010   #12

Win 7 64 bit professional

Quote   Quote: Originally Posted by Tews View Post
Oy Vey.
My System SpecsSystem Spec

 changed BIOS settings..:((

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
I can't access BIOS settings because BIOS assumes Windows is resuming
Good evening! A week ago I reinstalled Windows 7 in EFI mode on my laptop, and now I've got this problem: whenever I turn on my computer after a shutdown, the BIOS says "System Resuming" instead of "Press F2 to enter settings". This makes impossible for me to access BIOS settings. Previously, my...
General Discussion
Changed Sata settings in BIOS now disk is invalid
My laptop wasn't running games as it should so instead of troubleshooting the problems we decided to do a clean install of windows 7. None of the drives would show up so we looked it up and used the driver cd that came with the laptop and they weren't on the disk. then we tried to boot from the OS...
Installation & Setup
memory frequency changed in bios
Hello, I was wondering i changed the frequency in the bios from automatic to 400MHz. I got 2x2GB DDR2_800 400MHz so does this setup improving my system or does it have bad effects? Friendly kinds, Joshua Mitchell Edit: where stand the "800" for?
PC Custom Builds and Overclocking
BIOS: Can access BIOS utility, but cannot change settings.
Hello: This is my first post here, so hi to everyone. I just got an ASUS X401a Notebook and I want to use a flash drive to boot from Linux. I need to change the sequence in the BIOS so that the flash drive is first choice to boot from. I have no problem accessing the BIOS utility, but it...
General Discussion
Sleep mode changed upon altering BIOS settings
Hi, I'm not actually having a problem per say. However, my computer was getting too hot because I'm in Florida, So i went into the BIOS and changed a few things like turning off the auto-controlled fan sensors, FSB i put down to 200 and the CPU voltage I changed to 1.0Volts. I started up windows...
Performance & Maintenance
Changed BIOS settings now Windows 7 wont start
Hi I have been incredibly stupid and changed the settings in my BIOS setup. What is even more stupid is I did this by making it "Load Optimal Defaults" so I dont actually know what has been changed. As a result of this windows 7 now cannot start, it brings you to the error fixing part where...
General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:10.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App